I thought I'd share a couple of ideas that we've been working on. We're still in the developmental stages of these but I think they're going to be pretty handy additions.
It seems like at every match I hear someone asking about a scope cap wrench. Some people have them in their stock pack, but some people don't have a stock pack to put small tools in. I was talking to a friend on Monday and he asked about making a small pouch to hold an Allen wrench in and attaching it to the sling. I told him I'd see what I could come up with. We're working on a super small pouch that you can slip onto your rifle sling. The picture shows only one wrench but the final version will have room for two. I envision the pouch being placed in the center section of a TAB GEAR sling, in between the webbing strips. This will keep the pouch out of the way yet easily accessible at all time. The elastic will be sized to fit the 1 1/2" webbing that we use on our slings.
The other item was also recommended to me by someone I don't think I've ever met, but who contacted me with an idea he had that I think is just great. I've seen lots of guys with their dope stuck to the side of their stock, you've got to break your cheek weld to look at dope. I've seen guys have a card dummy corded to the side of the scope, you've got a card dangling in the wind and you still have to grab the card and turn it to see the dope. I'm working on a dope card that will attach to the inside of the sling up against the front swivel that will allow you to see your dope without breaking your cheek weld, just by glancing at the card. The dope holder is slim and flexible enough that when you sling up the pouch is not noticeable at all when it's folded across your hand.
If anyone has any input or ideas that will make these items better I'd love to hear them.
Also, these are in the developmental stages and not ready to be put on the market just yet.
It seems like at every match I hear someone asking about a scope cap wrench. Some people have them in their stock pack, but some people don't have a stock pack to put small tools in. I was talking to a friend on Monday and he asked about making a small pouch to hold an Allen wrench in and attaching it to the sling. I told him I'd see what I could come up with. We're working on a super small pouch that you can slip onto your rifle sling. The picture shows only one wrench but the final version will have room for two. I envision the pouch being placed in the center section of a TAB GEAR sling, in between the webbing strips. This will keep the pouch out of the way yet easily accessible at all time. The elastic will be sized to fit the 1 1/2" webbing that we use on our slings.
The other item was also recommended to me by someone I don't think I've ever met, but who contacted me with an idea he had that I think is just great. I've seen lots of guys with their dope stuck to the side of their stock, you've got to break your cheek weld to look at dope. I've seen guys have a card dummy corded to the side of the scope, you've got a card dangling in the wind and you still have to grab the card and turn it to see the dope. I'm working on a dope card that will attach to the inside of the sling up against the front swivel that will allow you to see your dope without breaking your cheek weld, just by glancing at the card. The dope holder is slim and flexible enough that when you sling up the pouch is not noticeable at all when it's folded across your hand.
If anyone has any input or ideas that will make these items better I'd love to hear them.
Also, these are in the developmental stages and not ready to be put on the market just yet.
