Photos The best way to end a year...

96C

96C

Sergeant
Full Member
Minuteman
    • Aug 9, 2007
    1,255
    2,206
    Aust
    #1
    Forget about NYE, we had thunder storms, power outages and hot weather...

    The good news is the USO ST10's finally arrived 31st December after ordering it in early August! I won't exactly miss my MK4 scope, this is a definite huge step in the right direction.
    Couple days earlier my Swaro laser guide came from CameraLand to replace the busted Bushnell 1500ARC LRF. Hitting stop signs past 1,680 meters from the tripod.
    PRS medium SSP2 tripod for christmas from my partner.

    It's all coming together, the system is rounding out.

    This is a great community, a hive of important and accurate information with good vendors and good atmosphere. So I wish a happy new year to everyone and I hope that you and your families have a good festive holiday together.
    Take care,
    J
     
    #2
    Re: The best way to end a year...

    That is handsome. Very nice. If you don't mind, which bubble unit is that and how do you like it's placement? That looks like a better system than the side folders, etc.

    Have a wonderful new year as well!
     
    #3
    Re: The best way to end a year...

    feels good dont it?
    grin.gif


    i ordered my SN3 in june and got it 4 days before xmas.

    theres no going back now...
     
    #6
    Re: The best way to end a year...

    <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Sunnyside Scott</div><div class="ubbcode-body">What and where did you get the protector that is mounted on your scope rail in the zone under your scope?
    I tore the skin on my thumb up while loading my Rem 700 on the sharp scope rail.
    SScott </div></div>

    Those are magpul rail covers, they are soft rubber and can be cut to any lenght. if you need one pm me as I have three new ones for sale.
     
    #9
    Re: The best way to end a year...

    <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: OLIN</div><div class="ubbcode-body">That is handsome. Very nice. If you don't mind, which bubble unit is that and how do you like it's placement? That looks like a better system than the side folders, etc.</div></div>

    Hi mate, it's the "Anti Cant Device" from the brownells website, was about $20. It really brings your attention to rifle cant... It might feel straight but often is off centre when you take a peek. This is all about 1%ers so if it helps and doesn't weigh a tonne it's welcome.
    Placement really isnt an issue now, on my illuminated reticle MK4 I couldn't actually see the bubble with either eye when taking a sight picture but now with the ST10 just open your non master eye and it's right there. Backed up against the rear scope ring to keep it out of the ejection port area. Nice and low profile, defintitely worth the money.

    The rail protector, correct MagPul just the normal RIS RAS ladder rail cover. Got them for my MIRS Rail to stop the side rails getting smashed. They can be found all over the place.

    Impact, so far the Swaro is MUCH more precise than the Bushnell 1500ARC however is much slower at the same time. I also find that the button is huge and fairly stiff so if you're free-hanging it when you press to lase it can come off centre a bit moving the reticle potentially getting a wrong reading. The unit will mount to a tripod base plate which is good (I use our bushnell spotter plate for that, good to go!)

    Thanks for the kind words fellas, will hopefully be out in the field later this week so will snap a couple pics of things relating to stuff.

    Take care,
    J
     
    #11
    Re: The best way to end a year...

    I would also like to know where those pouches came from. i havent seen anything like them online. Eagle industries has some but not with the cord on them.
     
    You must log in or register to reply here.
    Top Bottom
    Back
    Home
    Forums
    Merch
    Alerts