Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
Site updates coming next Wednesday at 8am CT!
The site will be down for routine maintenance on Wednesday 6/5 starting at 8am CT. If you have any questions, please PM alexj-12!
I'm looking to replace this tikka t3x tac a1 barrel and dont know how thick I can go with this handguard. Wanting to do m24 or heavy palma, any1 know the answer to this? Or marksman but I think it would require about the same clearance as the heavy.
1.15" is the max breech diameter you can have due to the bevel on the Tikka receiver. I know this is the case with standard Tikka receivers, so I assume the Tac A1 uses the same receiver.
Most barrels come with 1.20-1.25" breech diameters so they'll need turned down.
1.15" is the max breech diameter you can have due to the bevel on the Tikka receiver. I know this is the case with standard Tikka receivers, so I assume the Tac A1 uses the same receiver.
Most barrels come with 1.20-1.25" breech diameters so they'll need turned down.
Just for the action though right? I'm no smith so idk what I'm talking about but that's something a good gunsmith could do no problem right? Just a local guy with a lathe and nice tools who knows his stuff