• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Accessories Throw Levers $15 for SH members!

Payed for two a week ago, wondering if they shipped out. No comms from seller.
 
Did you get the SWFA 5-20 measurement yet, and could you do a cheater lever for the SWFA 5-20 non illum parallax knob? Tks.
 
Last edited:
Anybody have some pics of these installed?
Got one of his levers on a C35. They fit good and work just as good
3473DF0B-2C47-463B-8116-6EC891133CB7.jpeg
 
  • Like
Reactions: 260284
I think the 5-20 uses the same as the 3-15.

If you can get me the diameter of the knob and how thick the lever can be I can make one.
I would like to try one for the SWFA 5-20 parallax knob, and if it works, I'll buy 3 more. 1.45" diameter, 0.25" wide.

PS The power knob is tapered, not sure if a lever would stay put? It's about 1.65" diameter.

Thanks.
 

Attachments

  • 20230131_223405.jpg
    20230131_223405.jpg
    284.3 KB · Views: 31
  • 20230131_223347.jpg
    20230131_223347.jpg
    294 KB · Views: 26
Can anyone provide a pic of one of these on a Cronus BTR Gen2 Scope?
I'm curious how it fits over the nub that's already on the scope.

Thanks.
 
Can anyone provide a pic of one of these on a Cronus BTR Gen2 Scope?
I'm curious how it fits over the nub that's already on the scope.

Thanks.

There’s a notched area on the throw lever where it fit over the nub on the scope. Just an FYI, the BTR Gen 2 nub is wider than the original BTR nub; be sure to order appropriately.
 
This is for the original Cronus BTR, but you get the idea of how it works.

The BTR Gen 2 will have a slightly wider notch to fit over nub on your magnification ring but otherwise it looks the same.


IMG_7428.jpeg
 
Burris XTR III non- US (idk if that matters or not) model?
 
This is for the original Cronus BTR, but you get the idea of how it works.

The BTR Gen 2 will have a slightly wider notch to fit over nub on your magnification ring but otherwise it looks the same.


View attachment 8230679

Thanks, Are these reversible so that I can have the lever on either side of the built-in hump? Or do they only go on one way?
Sorry for the questions, but I'm a total noob when it comes to scopes and this stuff.
 
Thanks, Are these reversible so that I can have the lever on either side of the built-in hump? Or do they only go on one way?
Sorry for the questions, but I'm a total noob when it comes to scopes and this stuff.

Yes, they are reversible, but it might interfere with your bolt or bottom out🤷‍♂️
 
Is one available for the Nightforce NX8 4-32x? Hate the factory post since you have to decrease magnification to cycle a bolt gun.
 
Might be a pain to do this one or not worth the hassle, I didn't realize it has 2 distinct nubs on the magnification ring. One at the 4x mark and one at the 12x mark. They are spaced right at 90 degrees apart though

A. 1.658"
B. 0.700"
C. 0.580"
D. 0.104"

B2. 0.400"
C2. 0.260"
D2. 0.104"
 

Attachments

  • 20231204_210614.jpg
    20231204_210614.jpg
    237.8 KB · Views: 24
I now have at least 12 of these throw levers. They are so much more comfortable to grab than the Vortex and switchview levers I have. I've actually broken several of the Vortex levers on 3gun rifles. I have Aadland Engineering levers too, while they are comfortable, they are expensive. These levers are the best value by far.