Re: tikka in trg chassis
Thank you for the kind words guys!
The T3 will not fit directly into a TRG stock. With our T3 backbone and with modifying our triggerguard (or using a TRG) trigger, it will work for the short action calibers.
The long action T3 calibers are a different story. The action is the same, meaning a TRG-42 stock is even further off from being usable. And the magazine opening in the action is not long enough to properly run the AICS 300WM mags. Basically the mag sits directly against the front of the trigger, negating both our trigger guard and the use of the TRG trigger.
In short, it's possible in short action calibers but is difficult enough for the long action calibers to be a no-go. If you have a machine shop and a ton of free time then you can make anything of course. Good luck,
Justin