So I became interested in an AR10 platform that shoots 6.5 Creedmoor and that brought me to the touted SP10M and SP10. I head over to their website to learn specs and retail costs etc. Very disappointing and really just absent the technical information for a 4k rifle that is supposed to be great. I emailed Seekins through the website and voiced my criticism and asked for a comparison between the two. I wanted to share what I learned here with all of you that may not know what you're really getting. Tyler stated:
SP10M comes out of our custom shop and can be purchased directly through Seekins, whereas the SP10 is a production rifle and must be purchased through a dealer.
The SP10 is our production large frame AR platform rifle. It receives extensive testing but is just a production rifle that gets cleared and passed through our QC team. The rifle still comes with our 100% Lifetime Warranty and Satisfaction guarantee. The rifles are not accuracy tested before they leave but in the event the performance is not to your satisfaction or standards, we will pay to have the rifles brought in and accuracy tests performed to ensure that your rifles are in tip top shape!
The SP10M, has extensive testing performed all the way down to the parts selection. We handpick the components that will eventually all come together to complete that rifle. The components are measured before and after coating processes to further reconfirm the fitment and finish. The SP10M is currently being fielded for the US SOCOM Operations Tier 1 and Tier 2 units. We have tested both military issued ammunition and high-quality factory match ammo. The rifle is tested for accuracy before it leaves with high quality ammunition, each rifle receives a 60-round break in at the bare minimum
The SP10 comes with our low-profile adjustable gas block: https://seekinsprecision.com/parts-accessories/gas-gun-parts/low-profile-adjustable-gas-block.html
The SP10M comes with our select adjustable gas block: https://seekinsprecision.com/parts-accessories/gas-gun-parts/select-adjustable-gas-block-876.html
Below are the options we offer for our SP10M. Cost is $4200, regardless of configuration.
Rifle 1 – 0011300101 - F
Caliber: .308WIN
Barrel Length: 16” (1:11.25)
Gas System: Mid Length Gas Tube, Select Adjust Gas Block (.875")
Stock: 6 Position Adjustable (42 coil single spring buffer system)
Trigger: Trigger Tech AR Competitive (3.5lbs fixed)
Color: FDE/BLK
Rifle 2 – 0011300103 – F
Caliber: .308WIN
Barrel Length: 18” (1:11.25)
Gas System: Intermediate Length Gas Tube, Select Adjust Gas Block (.875")
Stock: Magpul PRS Gen 3
Trigger: Trigger Tech AR Competitive (3.5lbs fixed)
Color: FDE/BLK
Rifle 3 – 0011300105 – F
Caliber: .308WIN
Barrel Length: 22” (1:11.25)
Gas System: Extended Rifle Length Gas Tube, Select Adjust Gas Block (.875")
Stock: Magpul PRS Gen 3
Trigger: Trigger Tech AR Competitive (3.5lbs fixed)
Color: FDE/BLK
Rifle 4 – 0011300107 – F
Caliber: 6.5 Creedmoor
Barrel Length: 22” (1:8)
Gas System: Extended Rifle Length Gas Tube, Select Adjust Gas Block (.875")
Stock: Magpul PRS Gen 3
Trigger: Trigger Tech AR Competitive (3.5lbs fixed)
Color: FDE/BLK
Please let me know what further questions you may have!
I followed up with 2 more critical questions that really are of utmost importance. What is the barrel material and manufacturer and their projected life for 6.5 CM? How is the gas block affixed to the barrel? Tyler responded promptly and did not disclose the barrel manufacturer but said it is SS 416r, 3000 rds or so, and the gas block is affixed with a set screw that is dimple in the barrel.
Yes a dimpled barrel with a set screw for gas block installation. We'll I heard all I needed to know. I will reserve my opinions but will say I would NOT buy this rifle SP10 or SP10M. Sticking with my Scar 20s 6.5 CM.
SP10M comes out of our custom shop and can be purchased directly through Seekins, whereas the SP10 is a production rifle and must be purchased through a dealer.
The SP10 is our production large frame AR platform rifle. It receives extensive testing but is just a production rifle that gets cleared and passed through our QC team. The rifle still comes with our 100% Lifetime Warranty and Satisfaction guarantee. The rifles are not accuracy tested before they leave but in the event the performance is not to your satisfaction or standards, we will pay to have the rifles brought in and accuracy tests performed to ensure that your rifles are in tip top shape!
The SP10M, has extensive testing performed all the way down to the parts selection. We handpick the components that will eventually all come together to complete that rifle. The components are measured before and after coating processes to further reconfirm the fitment and finish. The SP10M is currently being fielded for the US SOCOM Operations Tier 1 and Tier 2 units. We have tested both military issued ammunition and high-quality factory match ammo. The rifle is tested for accuracy before it leaves with high quality ammunition, each rifle receives a 60-round break in at the bare minimum
The SP10 comes with our low-profile adjustable gas block: https://seekinsprecision.com/parts-accessories/gas-gun-parts/low-profile-adjustable-gas-block.html
The SP10M comes with our select adjustable gas block: https://seekinsprecision.com/parts-accessories/gas-gun-parts/select-adjustable-gas-block-876.html
Below are the options we offer for our SP10M. Cost is $4200, regardless of configuration.
Rifle 1 – 0011300101 - F
Caliber: .308WIN
Barrel Length: 16” (1:11.25)
Gas System: Mid Length Gas Tube, Select Adjust Gas Block (.875")
Stock: 6 Position Adjustable (42 coil single spring buffer system)
Trigger: Trigger Tech AR Competitive (3.5lbs fixed)
Color: FDE/BLK
Rifle 2 – 0011300103 – F
Caliber: .308WIN
Barrel Length: 18” (1:11.25)
Gas System: Intermediate Length Gas Tube, Select Adjust Gas Block (.875")
Stock: Magpul PRS Gen 3
Trigger: Trigger Tech AR Competitive (3.5lbs fixed)
Color: FDE/BLK
Rifle 3 – 0011300105 – F
Caliber: .308WIN
Barrel Length: 22” (1:11.25)
Gas System: Extended Rifle Length Gas Tube, Select Adjust Gas Block (.875")
Stock: Magpul PRS Gen 3
Trigger: Trigger Tech AR Competitive (3.5lbs fixed)
Color: FDE/BLK
Rifle 4 – 0011300107 – F
Caliber: 6.5 Creedmoor
Barrel Length: 22” (1:8)
Gas System: Extended Rifle Length Gas Tube, Select Adjust Gas Block (.875")
Stock: Magpul PRS Gen 3
Trigger: Trigger Tech AR Competitive (3.5lbs fixed)
Color: FDE/BLK
Please let me know what further questions you may have!
I followed up with 2 more critical questions that really are of utmost importance. What is the barrel material and manufacturer and their projected life for 6.5 CM? How is the gas block affixed to the barrel? Tyler responded promptly and did not disclose the barrel manufacturer but said it is SS 416r, 3000 rds or so, and the gas block is affixed with a set screw that is dimple in the barrel.
Yes a dimpled barrel with a set screw for gas block installation. We'll I heard all I needed to know. I will reserve my opinions but will say I would NOT buy this rifle SP10 or SP10M. Sticking with my Scar 20s 6.5 CM.
percent security.
