I got my gun back from the smith last week. The flutes I had him cut on the barrel looks like he chewed them out instead of cut them. I think he used a very dull bit on it. Do yall have any suggestions on how to fix it.
Gunsmithing ugly flutes
- Thread starter TravisB
- Start date
Re: ugly flutes
I have a nice belt sander and can take care of those ugly imperfections for you. Just send them to me.
I have a nice belt sander and can take care of those ugly imperfections for you. Just send them to me.
Re: ugly flutes
A dowel rod a few inches long and some 320 wet R dry paper from the auto supply is one way to get them out. But it takes a LOT of elbow grease. Keep the paper wet so it doesn't load up on you.
A dowel rod a few inches long and some 320 wet R dry paper from the auto supply is one way to get them out. But it takes a LOT of elbow grease. Keep the paper wet so it doesn't load up on you.
Re: ugly flutes
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: PadronAniversary</div><div class="ubbcode-body">easier fix....have the smith rework it </div></div>
F--- that, if they are that bad, have him get you a new barrel and take the work to another smith!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: PadronAniversary</div><div class="ubbcode-body">easier fix....have the smith rework it </div></div>
F--- that, if they are that bad, have him get you a new barrel and take the work to another smith!
Similar threads
