Rifle Scopes US optics T-pal 34mm owners and Spuhr mounts

Spuhr

Spuhr

Gunny Sergeant
Full Member
Minuteman
Sep 25, 2009
1,136
78
54
Sweden
www.spuhr.com
#1
As a number of you know that our 34mm mounts never have worked for T-pal scopes we have now decided to come out with one model that does.
Its considerably longer than other models and it will have a 3" gap betwen the rings.
Each ring will be 1,25" long.
5,5" long totally

Will this make it for all 34mm T-Pal, or have I missed something?
Håkan
665604_431822943532566_1916686935_o.jpg

131326_431822853532575_777807754_o.jpg

135867_431822093532651_223802422_o.jpg
 
#2
Re: US optics T-pal 34mm owners and Spuhr mounts

I know this request is really reaching out there BUT would it be possible to make Spuhr rings / mounts 30mm or 34mm that directly fit a Sako 75/85?

Just asking,
David
 
#7
Re: US optics T-pal 34mm owners and Spuhr mounts

LORDY! I'm all-a-twitter!

A one piece mount is THE holy grail for ring alignment and concentricity.

NO MORE RING LAPPING! (And no more scope tube torqueing out of alignment.)

 
#8
Re: US optics T-pal 34mm owners and Spuhr mounts

Just measured what I have from the USO mount. It's 3 5/16ths between the rings. There is a little room around the housing remaining.

This is with a SN3 TPAL 5-25 mounted up.
 
#12
Re: US optics T-pal 34mm owners and Spuhr mounts

When will these be available. I think I'd like it even on my Premier. I like more space between the rings.
 
#14
Re: US optics T-pal 34mm owners and Spuhr mounts

I watched your video explaining the Spuhr mount features last week. I really didn't see what the big advantage of Spuhr mounts was before that but your explanation of the features made a compelling case for the mounts superiority in a variety of situations. I am glad to see you offering it for USO T-pals. Incompatibility with the popular USO 5-25x had seemed a bit of a design oversight to me.
 
#15
Re: US optics T-pal 34mm owners and Spuhr mounts

The problem with fitting all scopes is that very many models are required.
I designed the mounts originally around S&B pmll and they have a very short maintube, the tpal is opposite where a long mount is the problem.
Now we do likely have the one of the largest scopemount programs in the industrie, with around 35 different models and a huge nuumbers if accesories just to fit as many models as possible.
Still there is models are mounts not fits.....
And there always will be....


Håkan
 
#22
Re: US optics T-pal 34mm owners and Spuhr mounts

Hakan, Would it be worth it to produce a mount, same level of build, strength, for smaller scopes? For example, the US Optics SN-4 will not fit your mount 3601, the space between turret assembly and objective lens housing is 1 1/8th", could you produce a mount that had ring width that was approx. 1.0", no level,would be able to mount smaller scopes on a monolithic upper, same features as ISMS. One size fastener (T15), same leveling wedge system, Spuhr build and quality.

Basically the 3601 without a spirit level (makes room for BUIS), 1.0' ring width (not tube diameter), either with/without cant, for smaller rifles(.223s) and smaller scopes (USO SN-4, S&B 1-6X, etc.

I would buy the 1st three that you produced. LOL.

Best, 997/2man
 
#27
Re: US optics T-pal 34mm owners and Spuhr mounts

Let me rephrase the question I have a Accuracy International AIAE MK3, with this mount and a US Optics 5-25 (new 5-25 with 90 MOA) is it possible to get a 100 yard zero.
 
#28
Re: US optics T-pal 34mm owners and Spuhr mounts

GA10

I havent tried it myself.
But it should work out fine.
As the maximum tilt never should be more than half the elevation and the tilt in this case is 40 moa and the scope have 90 moa elevation this should just work great.

Håkan
 
#29
Re: US optics T-pal 34mm owners and Spuhr mounts

As Håkan said. As long as your rifle base (built in rail) and this 11.6MiL / 40MOA together equal half (or a little under) total elevation you should be good.

My Long travel 5x25x58 T-Pal has 30.8Mil / 105.8MOA on the Spec sheet.

423796503_usopal_122_500lo.jpg


Håkan Thanks again, this mount is <span style="font-weight: bold">built</span>.
 
#35
I'm a bit confused. I have a built in 20 MOA base on my defiant deviant action. I went with a SP-4003B 1.5" high 34mm 0 mil/0moa upon the Sales persons info to get clearance on my AX chassis. So 20 MOA base plus 0moa Spuhr gives me a 20MOA right? Net affect is no difference between the 20moa base + run of the mill rings?

I ask this cuz I'm having fits with the USO Erek and getting a bottom of travel zero stop. I've watched the vids and read posts on how to and I've met a brick wall.


Sent from my iPhone using Tapatalk
 
#39
I have a similar question.

I use a 3.5-15x50 NXS on one of my rifles, NO ZERO-STOP but 20moa turrets... the rail I've got on that rifle right now is a 10MOA rail, and my zero (right now) is two & a half rotations (50moa) up from the scopes very-bottom elevation adjustment. My intentions are to move that scope to a different rifle/same caliber (should be very close zero) which HOWEVER has a 20moa rail. I ordered a spuhr 20moa mount thinking "that" 20 minutes of taper plus the 20moa rail on this other rifle should bring my "zero" to damn near the bottom of my elevation adjustment (& serve as a zero-stop of sort) ...this is my thinking anyway

...am I correct assuming this ? I saw it as a tool to get my scope (very close/if not perfectly set up) with a form of zero-stop without an actual zero-stop turret* PLUS, gain the FULL upward-elevation adjustment of the scope. Has anyone else done this? Setting up in this way with the 20moa spuhr and the 20moa rail "should" (in this case) give a guy the advantages I listed, right? ..or might this all backfire on me?? lol

Curious if anyone else has done/tried this on their-own rifles ?
 
You must log in or register to reply here.

Similar threads

JMetzinger
Accessories MPA BA Bolt Action 34mm Mount (0 MOA-.125) w/Inclino Level Mounted
Replies
4
Views
190
JMetzinger
JMetzinger
Rpatton73
Optics **UPDATED OPTICS FOR SALE 04/21/2025** OPTICS, SUNSHADES, LASERS, MAGNIFIERS, FLASHLIGHTS, MOUNTS and RING SETS
Replies
0
Views
517
Rpatton73
Rpatton73
Rpatton73
Optics **UPDATED OPTICS FOR SALE 04/24/2025** OPTICS, SUNSHADES, LASERS, MAGNIFIERS, FLASHLIGHTS, MOUNTS and RING SETS
Replies
7
Views
1K
Chandalar
Chandalar
nickw
Optics Athlon Ares BTR Gen3 HD 2.5-15 MOA and a Leupold 34mm Mount
Replies
3
Views
293
nickw
nickw
Rpatton73
Optics **UPDATED OPTICS FOR SALE 04/06/2025** OPTICS, SUNSHADES, LASERS, MAGNIFIERS, FLASHLIGHTS, MOUNTS and RING SETS
Replies
0
Views
492
Rpatton73
Rpatton73
Top Bottom
Back
Home
Forums
Merch
Alerts