Rifle Scopes USO and seekins 6 screw lows?

[K_4c]

I've came up with the money (sold stuff) to step up to the world of great glass! I'm looking at a SN3 1.8-10x37 to run on my REPR... I want seekins 6 screw lows to finish the set up.

My question is:

Will the obj bell clear and where can can I find seekins 6 screw low rings? I need a set of rings without the giant hardware (or nut) hanging off the side (cut my knuckle once and that was it! side charging handle).

I've looked at QD rings such as Larue and American Defense but like I stated before; I need a set of rings that will put the obj bell nats ass close to the foward arm rail (just what i prefer).

thanks for any and all advice.

Kinnamon

 

[K_4c]

Re: USO and seekins 6 screw lows?

anybody?

 

[lazy21]

Re: USO and seekins 6 screw lows?

what rifle?

 

[K_4c]

Re: USO and seekins 6 screw lows?

LWRC REPR (ar platform)

 

[AlabamaShooter]

Re: USO and seekins 6 screw lows?

Ask Glen Seekins, he should be able to tell you. Also is it the adjustable objective or fixed?

 

[lazy21]

Re: USO and seekins 6 screw lows?

you would need a min of 1.06"

 

[K_4c]

Re: USO and seekins 6 screw lows?

adjustable... does the entire bell spin or is it a 2 part device?

 

[K_4c]

Re: USO and seekins 6 screw lows?

does seekins still offer the 6 screw rings? I looked on their most current web site and only saw 4 screw type rings.

 

[AlabamaShooter]

Re: USO and seekins 6 screw lows?

On mine the entire objective rotates. It made using flip caps a little difficult when I was shootin long range with it.

 

[lazy21]

Re: USO and seekins 6 screw lows?

here is my rifle with a gg&g 1.06 on a 37mm USO

 

[K_4c]

Re: USO and seekins 6 screw lows?

true.... thanks for the heads up.

 

[K_4c]

Re: USO and seekins 6 screw lows?

what do you have for clearnace there??? 1/4" or less? thanks for the pics

 

[lazy21]

Re: USO and seekins 6 screw lows?

let me finish my dinner and I'll go measure it for you.

 

[K_4c]

Re: USO and seekins 6 screw lows?

whenever you get a chance bud. I appreciate it.

 

[lazy21]

Re: USO and seekins 6 screw lows?

couldn't get the caliper in it so had to use the feeler gauges. with the BC cap it was .065 and without is .143

 

[K_4c]

Re: USO and seekins 6 screw lows?

Thanks again Lazy21. good info

 

[Glen Seekins]

Re: USO and seekins 6 screw lows?

On an AR platform the low rings will be way too low. At minimum i would sugest something in the 1" range. The rail is monolithic, so when the scope is mounted the rail will be directly under your objective. Measure your objective outside diameter (with caps on). Devide that in half then add in what clearance you want. That is the lowest you can go. It wont measure 37mm on the outside.