i searched but only found posts a couple years old. anyhow, looking for a good adapter to run a cyclone on a 223 that is threaded 1/2x28
thanks!
thanks!
Suppressors well made 5/8 to 1/2 adapter
- Thread starter SkaerE
- Start date
Re: well made 5/8 to 1/2 adapter
..
A good source for quality and thoughtful work.
LOOK AT LOWER LEFT HAND CORNER OF THE SITE.
http://www.trosusa.com/
Mark McWillis
07-FFL-SOT
PO Box 680
Clackamas, OR 97015-0680
503-358-3708
Now your tending twice the threads...keep after them.
..
A good source for quality and thoughtful work.
LOOK AT LOWER LEFT HAND CORNER OF THE SITE.
http://www.trosusa.com/
Mark McWillis
07-FFL-SOT
PO Box 680
Clackamas, OR 97015-0680
503-358-3708
Now your tending twice the threads...keep after them.
Re: well made 5/8 to 1/2 adapter
I got mine from a hide member. Well made and he ships quickly.
http://www.snipershide.com/forum/ubbthreads.php?ubb=showprofile&User=2115
ksville
I got mine from a hide member. Well made and he ships quickly.
http://www.snipershide.com/forum/ubbthreads.php?ubb=showprofile&User=2115
ksville
Re: well made 5/8 to 1/2 adapter
The TROS stuff looks nice, however, I dont see an adapter to go from a 1/2-28 barrel to a 5/8-24 can. I have a Tornade adapter, very well made, and I think it was only $36
The TROS stuff looks nice, however, I dont see an adapter to go from a 1/2-28 barrel to a 5/8-24 can. I have a Tornade adapter, very well made, and I think it was only $36
Re: well made 5/8 to 1/2 adapter
..
Here you go...proper back cut, proper shoulder, nice thread protector, good stuff
..
Here you go...proper back cut, proper shoulder, nice thread protector, good stuff
Re: well made 5/8 to 1/2 adapter
Ah so there is one. Only thing I dont like about it is that it extends the length of the barrel somewhat. The tornado's outer threads are directly over the inner threads, only lengthening the barrel by the 1/8" of shoulder.
And I was wrong, $34.99
http://www.tornado-technologies.com/cgi/commerce.cgi?preadd=action&key=AD-0.5X28-0.625X24
Oh, I didnt look at the availability, guess that shoots that idea.
Ah so there is one. Only thing I dont like about it is that it extends the length of the barrel somewhat. The tornado's outer threads are directly over the inner threads, only lengthening the barrel by the 1/8" of shoulder.
And I was wrong, $34.99
http://www.tornado-technologies.com/cgi/commerce.cgi?preadd=action&key=AD-0.5X28-0.625X24
Oh, I didnt look at the availability, guess that shoots that idea.
Re: well made 5/8 to 1/2 adapter
I'm actually looking for the exact same thing and found these:
http://www.thesilencerstore.com/index.php?main_page=product_info&cPath=2&products_id=2
Does anyone know anything about Xcaliber Firearms LLC?
I can't find any Tros in stock anywhere.
I'm actually looking for the exact same thing and found these:
http://www.thesilencerstore.com/index.php?main_page=product_info&cPath=2&products_id=2
Does anyone know anything about Xcaliber Firearms LLC?
I can't find any Tros in stock anywhere.
Re: well made 5/8 to 1/2 adapter
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jonaddis84</div><div class="ubbcode-body">Ah so there is one. Only thing I dont like about it is that it extends the length of the barrel somewhat. The tornado's outer threads are directly over the inner threads, only lengthening the barrel by the 1/8" of shoulder.
And I was wrong, $34.99
http://www.tornado-technologies.com/cgi/commerce.cgi?preadd=action&key=AD-0.5X28-0.625X24
Oh, I didnt look at the availability, guess that shoots that idea.
</div></div>
That's the one I have only it's black. You might give them a call. I think they were listed as out of stock when i bought mine, but when I stopped by for threading they had one.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jonaddis84</div><div class="ubbcode-body">Ah so there is one. Only thing I dont like about it is that it extends the length of the barrel somewhat. The tornado's outer threads are directly over the inner threads, only lengthening the barrel by the 1/8" of shoulder.
And I was wrong, $34.99
http://www.tornado-technologies.com/cgi/commerce.cgi?preadd=action&key=AD-0.5X28-0.625X24
Oh, I didnt look at the availability, guess that shoots that idea.
</div></div>
That's the one I have only it's black. You might give them a call. I think they were listed as out of stock when i bought mine, but when I stopped by for threading they had one.
Re: well made 5/8 to 1/2 adapter
Just bought an Excaliber from TheSilencerStore.com (my link above)
Works great with my SCAR-H SD / my AR. Threads were concentric - no baffle dings, machining looks good (very clean - threads were smooth on, but not loose).
The outside part also fit inside the SCAR-H SD's 51-tooth Miter connector (This particular MITER connector actually shrouds back over the barrel about 2 inches with a clearance of just over .750 - so it was a close fit, but it looks to be made for just such an application).
Just bought an Excaliber from TheSilencerStore.com (my link above)
Works great with my SCAR-H SD / my AR. Threads were concentric - no baffle dings, machining looks good (very clean - threads were smooth on, but not loose).
The outside part also fit inside the SCAR-H SD's 51-tooth Miter connector (This particular MITER connector actually shrouds back over the barrel about 2 inches with a clearance of just over .750 - so it was a close fit, but it looks to be made for just such an application).
Re: well made 5/8 to 1/2 adapter
Those look very well made, I like that they overlap like the Tornado.
Those look very well made, I like that they overlap like the Tornado.
