Just started reloading my Dasher brass after about 2 years off. This brass was last fired at the 2020 Grind.
Lubed with 16:1 alcohol/lanolin, put die in co-ax press with no adjustments since last usage. Started noticing some, not all, of the cases look like this. Rounded neck/shoulder junction.
SAC die, Alpha (non-OCD) brass.
Middle one is how they should look. All three went through the die.
Lubed with 16:1 alcohol/lanolin, put die in co-ax press with no adjustments since last usage. Started noticing some, not all, of the cases look like this. Rounded neck/shoulder junction.
SAC die, Alpha (non-OCD) brass.
Middle one is how they should look. All three went through the die.