Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
I tried an undersized magnet a year ago and became frustrated that I still had to shake every pieces of brass. Does the stronger magnet help with that? I gave up thinking that I was going to have to tap each piece of brass regardless. Is this still the case? Or is their a better mousetrap?
Keep in mind that a thorough rinse is necessary for the pins to get out of the cases. If there’s a little bit of soap left, the pins will stick like crazy. I use my magnet to just transfer pins between my separator and tumbler drum.
I am using chips not pins but I get 99.9% of the chips out by spinning in the media separator. I then rinse and toss the brass in a towel and work it back and forth to help dry. There are usually a few chips on the towel when I am done.
I am using chips not pins but I get 99.9% of the chips out by spinning in the media separator. I then rinse and toss the brass in a towel and work it back and forth to help dry. There are usually a few chips on the towel when I am done.