Working a new load-with or without tuner at first?

[mark5pt56]

So, I have a can opener ready and a fresh can of worms to open! I've never used a tuner with centerfire and have a question in regards to best approach. Is it best to get a load first w/o tuner attached or with and set at "0" then tune what looks best thereafter?
I will be using an Area 419 HFM and will attach it regardless.

 

[just browsing]

Set to 0, obtain charge weight and seating depth, then make final adjustments using the tuner.

Tuners should not be used as a crutch for improper load development. Use it as an aid, not a replacement, and you will get much better results.

 

[mark5pt56]

Set to 0, obtain charge weight and seating depth, then make final adjustments using the tuner.

Tuners should not be used as a crutch for improper load development. Use it as an aid, not a replacement, and you will get much better results.

That's where I was leaning, thought adding it would throw things off a bit.