What all has to be done to install a Wyatt Extended Box in a REM 700, BDL BM 338 EDGE ?
stock milled, action opened, and bolt stop ???
thanks SM
stock milled, action opened, and bolt stop ???
thanks SM
Gunsmithing Wyatt Extended Box for 338 EDGE
- Thread starter Sendero_Man
- Start date
Re: Wyatt Extended Box for 338 EDGE
The bolt stop needs to be shortened .110", the bump out in the rear of the mag well cut out, bottom side, needs to be removed and the rear corners in the mag well cut out need to be re-cut.
If the receiver was a standard magnum the feed lips in the receiver need to be opened approx. .015" per side as well.
The bolt stop needs to be shortened .110", the bump out in the rear of the mag well cut out, bottom side, needs to be removed and the rear corners in the mag well cut out need to be re-cut.
If the receiver was a standard magnum the feed lips in the receiver need to be opened approx. .015" per side as well.
Re: Wyatt Extended Box for 338 EDGE
Pretty much what Roscoe said.....although, some of the magnum actions won't need anything done to the feed lips. Have had a few come through that did and some that didn't need anything done to feed the RUM case.
Pretty much what Roscoe said.....although, some of the magnum actions won't need anything done to the feed lips. Have had a few come through that did and some that didn't need anything done to feed the RUM case.
Similar threads
