Please share them with me. I've decided to have GAP build me a .338 and now I'm trying to round up some components for reloading. Your recipe's will be appreciated. Steve.
Your best .338LM loads.
- Thread starter Sumpter Steve
- Start date
Re: Your best .338LM loads.
I have 2 rifles in 338 Lapua, Sako TRG-42,and a Rem 700p MLR. I use the Remington when I go to my fathers in Idaho for hunting. I'll give you my loads for both guns, but remember each rifle is different. What works in mine might not work on yours.
Remingtom:
Hornady brass
Fed mag primer
Sierra 225 soft point
83.0 IMR-4350/88.0 IMR-7828SSC
1 1/2 moa at 200yrds
Sako:
Lapua brass
Fed mag primer
Seirra 300 SMK
78.0 H4831
3/4" or less at 200yrds
Lapua brass
fed mag primer
Lapua 250 lock base
83.0 H 4831
1-1 1/2" at 200yrds havent used this load that much.
I have 2 rifles in 338 Lapua, Sako TRG-42,and a Rem 700p MLR. I use the Remington when I go to my fathers in Idaho for hunting. I'll give you my loads for both guns, but remember each rifle is different. What works in mine might not work on yours.
Remingtom:
Hornady brass
Fed mag primer
Sierra 225 soft point
83.0 IMR-4350/88.0 IMR-7828SSC
1 1/2 moa at 200yrds
Sako:
Lapua brass
Fed mag primer
Seirra 300 SMK
78.0 H4831
3/4" or less at 200yrds
Lapua brass
fed mag primer
Lapua 250 lock base
83.0 H 4831
1-1 1/2" at 200yrds havent used this load that much.
Re: Your best .338LM loads.
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=348739#Post348739
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=348739#Post348739
Re: Your best .338LM loads.
Steve
There are plenty recipes under the heading "Reloading Depot". Just right under the this very section's heading. You should find a variety there. Also, I would try the 1000+ yards section.
FWIW, My load is for AIAWSM 338LM with 94.5 grains of RL25 for the 250 grains scenars, Fed 215M. Lapua brass, COAL at 3.600". Be careful, it's a hot load.
Steve
There are plenty recipes under the heading "Reloading Depot". Just right under the this very section's heading. You should find a variety there. Also, I would try the 1000+ yards section.
FWIW, My load is for AIAWSM 338LM with 94.5 grains of RL25 for the 250 grains scenars, Fed 215M. Lapua brass, COAL at 3.600". Be careful, it's a hot load.
Re: Your best .338LM loads.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DesertHK</div><div class="ubbcode-body">Steve
There are plenty recipes under the heading "Reloading Depot". Just right under the this very section's heading. You should find a variety there. Also, I would try the 1000+ yards section.
FWIW, My load is for AIAWSM 338LM with 94.5 grains of RL25 for the 250 grains scenars, Fed 215M. Lapua brass, COAL at 3.600". Be careful, it's a hot load. </div></div>
Thanks guys. I looked and "searched" for the info to no avail. Thanks for the link and the help. Steve.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DesertHK</div><div class="ubbcode-body">Steve
There are plenty recipes under the heading "Reloading Depot". Just right under the this very section's heading. You should find a variety there. Also, I would try the 1000+ yards section.
FWIW, My load is for AIAWSM 338LM with 94.5 grains of RL25 for the 250 grains scenars, Fed 215M. Lapua brass, COAL at 3.600". Be careful, it's a hot load. </div></div>
Thanks guys. I looked and "searched" for the info to no avail. Thanks for the link and the help. Steve.
Re: Your best .338LM loads.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Sumpter Steve</div><div class="ubbcode-body">Please share them with me. I've decided to have GAP build me a .338 and now I'm trying to round up some components for reloading. Your recipe's will be appreciated. Steve. </div></div>
UH OH!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Sumpter Steve</div><div class="ubbcode-body">Please share them with me. I've decided to have GAP build me a .338 and now I'm trying to round up some components for reloading. Your recipe's will be appreciated. Steve. </div></div>
UH OH!
Re: Your best .338LM loads.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: COURAGEWOLF</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Sumpter Steve</div><div class="ubbcode-body">Please share them with me. I've decided to have GAP build me a .338 and now I'm trying to round up some components for reloading. Your recipe's will be appreciated. Steve. </div></div>
UH OH! </div></div>
Whatever you do don't tell Jen. She will shit!!! LOL.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: COURAGEWOLF</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Sumpter Steve</div><div class="ubbcode-body">Please share them with me. I've decided to have GAP build me a .338 and now I'm trying to round up some components for reloading. Your recipe's will be appreciated. Steve. </div></div>
UH OH! </div></div>
Whatever you do don't tell Jen. She will shit!!! LOL.
