Bartlein 6mm 5R .237 bore barrel Blank 1.25 strait taper 1-7.5 twist 29 inch. $420 shipped

I set myself a goal this year to take a deer at 600 yards with an AR rifle. To be sure it was up for the task every time I went to the range even shooting other rifles I shot 1 cold bore shot at 600 to be sure it was always consistent. I carry this rifle to 900 on a normal basis.
This morning i had my chance, 601 yards and recovered him 35 yards from impact. I was just fine with a mature doe but this guy came in today and gave me that chance. One of my favorite hunts now
Rifle is a 16” 308win 178 eldm’s muzzle 2455 fps.

Going to be building another rifle for the 2025 season and am cross shopping a few different actions and chassis to go along with the build. I just sold my AT-X and have a Zeus la that I really like for the short bolt throw, smooth action and quick change ability. Had an impact and didn’t like it enough to keep.

Came off of my rimfire PRS rifle. Only reason I’m selling is to get the same scope to match my centerfire rifle. Love everything about the scope.

Reticle is the EBR7C in MOA. Looking for 2200, shipping and insurance included

Also have scope caps and throw lever available if interested

Email [email protected]

Used but in good shape Tangent Theta 5x25 Gen3XR, Spur 4001 mount, Hawk Hill Dope card holder , Anarchy Throw Lever, Scope Bell Cover , Brandt Built electronic level, Scope Shade, and original box and paper work. $3600 shipped extra insurance is on the buyer.

I sold the barreled action that was in this stock so now I am selling the stock.

Long action Rem 700 footprint. It was on a remage setup.

Manners T5 stock:$475 OBO
Stock- cheek piece was in-letted to be able to remove the bolt from the action
Glass and pillar bedded- Glass bedding was removed ahead of recoil lug to work with the barrel nut
Blind box with factory remington floor plate
No action screws

My preferred payment methods are as follows:
PayPal (sent as friends and family) is easiest for me if that works for you then my PayPal is [email protected] or 9897630503. Venmo works also, my Venmo is @Boa-Bongard. Please let me know your shipping address also and I will get you tracking info once it ships. Thanks.

Hey folks, Looking to sell the following:

SOLD 20-rd KAC mags. White follower, all KAC stamped

1x 10-rd KAC mag. White follower. $90 shipped.

2x KAC/Eagle SR-25 double mag pouches. $80 shipped for both.

3x KAC/Eagle Sr-25 10-rd mag pouches. $120 shipped for all 3.

Prices are shipped to CONUS. Located in UT for local sale. Venmo or PayPal preferred.

Sold a couple rifles and unloading.

WTS 6.5 CM Ammo:

All in original boxes.
PayPal F&F or Venmo preferred. Don't like the price...make an offer.

Very lightly used, only 40 rounds down the Proof Research barrel!
I was able to shoot a 1/2" 5 shot group after sighting in.
This rifle is guaranteed by Sig to shoot at least sub moa.
I bought this rifle for hunting Elk and it's just not going to happen this year.

Rifle with everything shown in pics is $3300 + Shipping.

Rifle only- $1900 + Shipping

Scope is a Steiner T6XI 5-30 Green Illumination MSR2 Mil Reticle sitting in an ARC 34 mm mount w/ bubble level.

Bipod is a UTG above bore bipod (Chinese but made well). I have all the original packaging and OEM materials for every item.

I'm willing to take some trades + cash for the right deal. NO GLOCKS, P320S, OR GARAGE BUILDS PLEASE! Some trade interest for me are:
Bullpups, VHS-2/Hellion, WLVRN, and some semi auto pistols, Garmin's new chrono, tactical gear etc.

Cross posted.

For sale, very good condition Vortex Razor Gen 3 6x36 MRAD. No marks, lenses are as new.

Comes with, box, sun shade, scope caps, warranty card, manuals, and zoom ring.

Price: $old shipped
No trades, please see my feedback. Many happy customers.

Have two regulator lowers, for Sig mcx. Brand new unfired. Asking $300 each, shipped to your ffl.

I have 2 Bartlein barrel blanks up for sale.

1. 29" M24 30 cal, 9.5-8.5 gain twist - SOLD Shipped
2. 29" Heavy Varmit 22 cal, 1-8 twist - SOLD Shipped

Like new with a lot of extras

Enclosed arca rail

Original black front rail and a green one plus all the extras lop spacers pic rail etc.

550 shipped

First off I have a Cheely 4.25 tactical frame (carbon steel). I had a gunsmith fit this stainless steel slide to the frame. It comes with a 9mm rock island barrel that I rough fit to the slide. SOLD

Next I have a 5” stainless steel frame. I got this in a parts lot I bought off gunbroker.com a few years back. I don’t know anything about it. I can try and answer any questions you may have. It does have a hand engraved serial number, and location of origin on it. It was shipped through an FFL to my FFL.
SOLD

Used Staccato P grip with custom stippling and added texture under trigger guard. Comes with mag release, and new long shoe flat trigger. $315 shipped

New Wilson Combat beaver tail safety.
$30 shipped

Also pictured is a Prodigy tree bark grip I post for sale in the parts classifieds. Comes with mag release, magwell and mainspring and plunger. SOLD

Dawson Precision magwell $30 shipped

2011 stainless steel pin kit $20 shipped

Might trade for a 4.25” Springfield Prodigy
I accept VENMO, Cash App and PayPal. If not using friends and family then buy will cover all fee’s.

As title states, thinking about switching the 223 AR15 to one of the above.

Would shoot the factory Hornady ELD-X or ELD- VT ammo.

Which one would be the most accurate? Which one would be more effective on coyotes under 500 yards.

Realistically all shots will be within 200 yards.

I’m torn between the two. Thanks in advance.

Hi all -
I was following a recipe for something called a "Carolina Load" for my 6.5CM, except I wanted to use H4831 instead of the H4831SC that was suggested. This is my first time reloading anything, and I don't yet know a lot about various different powders (except from a chart of fast vs. slow burners), but this particular recipe called for 44.3gr of the H4831SC.
I also realized that I bought the wrong bullet for the recipe, but I figured the overall fitment between the two might be minimal, so I proceeded (I have a Hornady 140 gr ELD Match, instead of the suggested 140 gr SST).
Long story short...I cannot fit 44.3 gr of powder in the case, and still install the bullet to COL of 2.800". It's such a compressed load that the bullet cannot be seated that deep and the bullet is mildly damaged when I attempt to seat it at that COL.
Is the physical shape of the power's granule quite different between these two powders? Is the Short Cut powder much smaller in size? I can't find a lot of information about the powder differences.
Thanks!

I just got a 6 dasher that I put together. Zermatt origin with proof pre fit 26" barrel. Brand new alpha brass srp. At 31.7 with varget I got a blown primer didn't come out but it had carbon ring around it and a hole. I started with shooters world precision and had it do the same thing at 31.5 with heavy bolt lift so I stopped cause I was just looking for pressure with the powder and just switched to varget. I did 5 rounds at 31.7 and didn't have a problem with the other 4 rounds but the 1 round had the problem. Shot 5 at 32.2 and they didn't have any problem or heavy bolt lift. I'm using winchester #41 cause it's what I have and I didn't think it would be a problem but is that the problem? Do I need to switch primers i do have some cci450. I also noticed my bolt now has 2 little dimples on the face is it trashed now to?

Up for grabs is a limited edition Barrett M107 Mil kit. This rifle features coyote cerakote, coyote plastics, a 29” .50 BMG barrel, 4 magazines, pelican case, UID sticker, and manuals. Everything is in new condition and unfired.

Price: $13,000 $11,750 shipped

Like his RINO hopes still matter. That mf'r is trash.



Login to view embedded media

Few questions on shooting in the prone position. Shooting an ar platform and just going through repetitions for groups but need some advice.
1. To load or not to load the bipod. Should bipod be at the muzzle or half way. I personally feel better not loading.
2. Rear bag should it be tucked firm under my arm and armpit. I squeeze with my left hand for reticle adjustment.
3. Can there be to much pressure from my cheek to stock while shooting.

I am working on not grabing and adding any other tension while firing. These are just a few things that came to my mind. I am also realizing i may have to bring my scope back some to my natural resting spot and not force my eye forward. Thanks again for the advice and knowledge.

I have a 30 cal barrel blank I would like to have chambered for my AXSR. I have contact a few places, but they won't chamber metric since it's a pita to switch to metic threads as I was told. What are you your places?

Gen 2 Razor 3-18x50 mils
$1200 PayPal f/f $120 extra if you want a set of Nightforce rings with it. Also comes with throw lever and defender front cap

In this thread it is encouraged to post epic rants.......be it from YouTube ,X or wherever......... this includes bear pit rants.

The video below is a great illustration......... School is in session........@sirhrmechanic is excused from class, as he seems to have ranting ( which I love and enjoy) down to the T

Login to view embedded media

thinking of putting one on an older A bolt for range use only ,any thing to look for /stay away from ?

Abdi Yusuf Hassan was arrested in Minneapolis in 2019 after he became a naturalized U.S. citizen.

This is wrong in so many ways.