Custom Built Remington 700
by RITTEN PRECISION in Louisiana.

Krieger Custom Crowned 20" Bbl 308cal (300-350 rounds fired)

McREES Aluminum Folder Chassis in OD Green

10rd MDT and 5rd Box Mag

Leupold Mark 4 4.5-14×50 Mil Dot Reticle Adjustable Objective (excellent condition, no scratches & Clear Glass) would sell separately $1025 shipped scope only

Atlas Bipod w Rubber pads and Metal Spikes

Jewel Adj. Trigger

PT&G one piece Fluted Bolt w/ Mini M16 Style Extractor

Pelican 1750 Case - worn but works as intended

40 rds of Match Ammo

Sling and Cheek Pad

Asking $4,000 plus $50 shipping for entire package
won't sell gun only or split anything up except will sell scope separately

$1025 for scope ONLY shipped

Can get more pics if needed DM me
Selling due to 6.5 CM train
FFL transfer must be 18 or over

Brand new in box SR 25 handguard.

Never been taken out of the sealed plastic bag!
Part #KM20362-1
$850 shipped and insured!!

I have an older mill on moa 3.5 x 10 Mildot reticle. Looking to get 750 shipped with the rings and level.

Willing to trade plus cash on my end if needed for stock, chassis, or scope depending on what it is.

Zelle, or ppff

Never used, but put into the bag so there is wear.

$800 shipped. Paypal FF or Zelle. Please PM me. Thanks.

Screwed up post

Sig P226 with silencer co threaded barrel and sig SRT trigger and TruGlo diver optic night sights. The date code under the proof marks on the side at KJ which indicates it was proofed in 1998. It’s a great shooting and smooth shooting gun. The single action trigger pull is 3 lbs and the double action pull is 7.3 lbs on my wheeler trigger pull scale. I still have the original sights that were removed when the new sights were installed.
It shows some normal wear from use and being an older hand gun.
Comes with a 15 round factory mag, 18 & 20 round Mec Gar mags, Blade Tec holster and Sig 2 mag holder.

$825 shipped to your FFL. If your FFL only accepts shipments from an FFL my local FFL will ship it for me for $30.

I’m a total noob to the world of building a bolt gun, I would like some information on the steps of building one. How much would you spend on a gunsmith?

Can you remove live (unfired) primers with a resizing die? I have some live primers (of the wrong type) in some brass I want to use. Guess the other option would be to “fire” them in the rifle.

For sale:

Area 419 reloading gear. All of it is excellent condition in original packaging with whatever was included with them when new.

1. Area 419 Headspace / Ogive Comparator Kit (Stand has been sold)

$250 shipped

2. Area 419 Zero Modular Shellholder System.

$175 shipped SOLD

3. Area 419 Die Storage Block.

$55 shipped

I accept discreet PayPal and Venmo (F&F ONLY)

We know what they are trying to do...

Hi guys - I'm about to send a Bartlein M24, .264, 5R, 7.5 twist blank to a smith to be spun for a CDG action which is, of course, pre-fit qualified. This is my first pre-fit barrel.

I asked the smith if he would "prefer" having the action and if that would result in a better product and didn't get a particularly strong reaction.

The smith agreed that there two related issues, one small and one possibly larger.

1. Timing the barrel so engraving shows. QUESTION: are pre-fit dwgs/specs sufficient to result in timed threads so that the engraving will show even if the action is not sent with the blank?

2. Timing the barrel for any curvature (banana) in the bore. Yes, @Frank Green and company make absolute top of the line barrels...but, it is possible that they have a bit of curvature and would benefit from being times so that curve is aligned the vertical axis, right? QUESTION: Send the action with the barrel for this possibility or not?

Right now I'm leaning on just sending the blank with a note that if the smith finds much in the way of a banana to let me know and I'll send the action. If not, then no worries about where the engraving ends up also.

And yes, I have action wrench, torque wrench, barrel vise, go/n0 go gauges, and friends more expert than myself if needed.

@Frank Green - you have been exceedingly kind to me in our past conversations so may I impose once again. What would you do?

And yes, this is not an earth shattering issue but its raining cats and dogs out and I'm bored! haha

Cheers

Seems I have a scope issue times seven scopes. It also seems like this is a legit issue. So, with that said I have a question for you dudes. Has anyone else seen an impact shift when dropping the rifle on a bag and taking a shot?

What started all this was trying to get my build and break times down. I’d shoot five shots from five different positions for time trying to keep them all in the #1 diamond on the Kraft Target. When I went from high kneeling to standing I dropped the rifle on the bag from about 12” in a hatchet type movement pushing to make up time. Hand on grip, forearm approximately 12” above the bag and let the rifle drop angling down to the bag. I noticed the shot went low when I called it center diamond. I shot again to confirm and it was center. I thought that was weird so I repeated the process and first shot was low, second shot was center. My mind went into overtime knowing there was an issue, but what was causing it? My first thought was chassis. Swapped around with three chassis to no resolve. Ok, it’s a barrel issue, again three barrels with no resolve. So I texted a dude that likes to test stuff. He said nope never tested that or heard of it but I’ll look into it. Only one thing left to do swap scopes and see what’s up. The results are below and they speak for themselves. What say you?

Here is the process I used to confirm the results checking different scopes.

- All shots were from standing position.
- Held grip, the rifle is 12” above bag, release forearm and rifle falls onto bag.
- Fire first shot.
- Pan over to next target and fire second shot.
- Pick up rifle and repeat for a total of 5 shots per target/10 rounds total.

Here is the list of scopes tested:
- Gen 2 Razor 4.5-27
- Zero Compromise 4-20
- Nightforce NXS 5.5-22
- Gen 3 Razor 6-36
- Leupold MK4 Fixed 16x
- Gen 2 Razor 3-18
- Viper PST 5-25

Chassis that were tried early on to eliminate that thought:
- AIATX
- XLR Envy Pro
- Early XLR Envy

Barrels Tested to remove that thought:
- 26” Proof 6mm
- 26” Bartlien
- 26” Proof 6.5mm

The last thing I tried was dropping the rifle onto the bag dialing the scope up and down to remove any lash then return to zero and fire. It fixed nothing.

Will work for ammo….

@Lowlight feel free to move if this needs to be elsewhere.

I have a McMillian stock forsale please excuse my ignorance but I’m not sure which model exactly. Was planning on using it for a build but the barrel I’m using is to large “proof comp profile”. The stock fits sendero no problem tho.

Asking 550 shipped

Willing to trade plus cash on my end for different stock or chassis

Zelle or ppff

I’m looking at buying a new gun for mostly long range use 400yds plus and I’d like some info before I buy. My budget is about $2,200 at the most for the rifle itself. I’m looking at an AR-10 or the Christensen Arms MPR.

1. Is it possible to build a 1MOA AR-10 at this price point? Preferably in .308.

2. If not, would 300 PRC or 7 PRC be more suitable for long range (out to about 1000 yds)? (I would want a long action if I went with the MPR).

3. What would the barrel life be for each of these be?

*Brand New Barrels* 0 Zero Rounds in them!

Switched barrels and won't need it anymore.

Aero Solus 6.5 Creedmoor barrel that came on their barreled action. Sendero profile, 1:8 twist, 22", threaded 5/8-24. $400 plus shipping

Aero Solus 6 Creedmoor barrel that came on their barreled action. Sendero profile, 1:7.5 twist, 26”, threaded 5/8-24. $400 plus Shipping

Dark spots near neck comes from dry wall tape.

$800 total plus shipping

Everyday the news gets worse!


Hundreds of University of California of Los Angeles (UCLA) students converted to Islam and participated in a massive group prayer to Allah on Wednesday night.


Just before police officers moved in and dismantled defiant pro-terrorism protest encampments at UCLA, students said Muslim prayers as the sun set over the campus.

The pro-terrorism students chanted "Allahu akbar" during the prayer and chanted "Allah is the greatest" of all gods.

simple to change the caliber on.

I DO NOT WANT THIS to turn into a Savage cluster fuck. Just looking to see what is out there these days, one can change chambering's on w/o involving a gun smith. Are there other MFG'ers that also offer the bolt head & barrel swap like savage?

Welcome to America, where your gov will take from you as they see fit. Then spend it on most everything you do not agree with?

I know ever time I have to endure leftest anything, I feel like I need a shower to flush their B/S, outside. Then I need to rethink how true America was, during my growing up & learning years.

M

Gregg Ritz from Huntmasters TV / Wild Communications is leading a "group" that has acquired TC Arms from Smith and Wesson. Prior to the 06 purchase by S&W they had a great smoke stick (My TC Omega is a tack driver for a smoke pole). Ritz was a former CEO of TC which makes me wonder if he left the company prior to the 06 sale. Website states new product line coming 2025. I wouldn't be mad if the Contender made a return.

SOLD PENDING FUNDS

Looking to sell a like new Knight’s Armament KAC SR-25 APC w/ all the KAC swag.

Rifle includes the highly desirable KAC MAMS 762 muzzle break installed. Original flash hinder included. Around 60rds fired thru it since 2016.

Ships in original case and box with all included paperwork and accessories, including manual, test target, QD slings and 20rnd Factory KAC magazine.

Asking $7500 shipped/insured from my ffl
Dealer to your ffl dealer.

Not looking for trades! Thx

A true creek, we passed it everytime we visited our son when he was stationed at Randolph AFB. the legend as to how it got its name is quite sad and rather tragic.

Been used for a season but in good shape. Comes with box and all accessories it came with.

Asking $2,250 TYD