I’m hoping you guys can help me out with this damn thing. I’ve never been able to get it function properly and I’d really like to have it working.

300BO
AERO upper and lower and aero mil-spec internals
8.5” Ballistic Advantage barrel w/ pistol length gas
Standard carbine buffer and spring
Aero adjustable gas block

Barrel has been dimpled for the gas block and the carbon fouling verifies good placement. Block and tube flow air freely when off the rifle as well.

I’m interested in running some Hornady Black 208gr AMAX rounds with a Dead Air Sandman S.

Or any damn round really.

At every click of the AGB, there is no lock back on an empty mag and no chambering of the next round in the mag. Doesn’t matter if Pmag or Okay Industries steel mag or Duramag. Doesn’t matter, won’t work.

I’d be grateful for any insights on what I can do to improve this thing other than disassembling and adding to the parts bin. I have a ton of different 300 ammo, can’t get subs or supers to work right.

Aero customer service suggested it was overgassed a year ago or so, but I can choke the AGB down to where there’s no ejection at all so I just don’t think that’s the problem. If there’s a comprehensive thread somewhere about 300 builds I’d love a link. Thanks for any help. I’m about to give up on it.

Have a Preferred Pre-fit for a Zermatt Origin. 223 AI. 23” long Remington Sendero 1-7. Has right at 1000 rounds on it.

$325 to me shipped to you.

Vortex LHT scope, 4.5-22 MRAD Zerostop installed, scope + Badger 20MOA Mount 1.4 High PN: 306-97

Selling as one unit

$1250 shipped

Shown on my DT SRS:

MPA BA Comp Chassis. Right handed

Overall good condition. A few scratches shown in the pictures from normal use. Comes with night vision rail and action screws.

$SOLD shipped

4 brass Area 419 Tunable ARCALOCK rail weights - $35 shipped CONUS

These also fit the Arcalock aluminum rail that the Manners PRS-TCS was sold with for a while.

Does anyone have a Manners, Back-in-Black with the heavy coverage option? Trying to judge it compared to the standard coverage.

Hello,
FNG here,

After shooting and also using nearly every saw imaginable for over 50 years, I had a board blow up in my shooting hand off a commercial table saw. I lost my shooting finger and mangled two others.

Is there any type of device or ideas for shooting with a disabled hand or do I need to shoot southpaw?

When thinking about the thousands of hours shooting off the bench or in the field, my heart breaks to think that is all lost and I have to start over.

Please help

I decided to build a long action and no longer need this action. I ordered it as a 223 and bought a 308 BF seprate. Buyer can choose which bolt face they want.

New Impact NBK SA RH
$1350 shipped

Manners PRS-TCS in High Plains (matte) and mini-chassis. Steel Arca rail with full weight kit, Sikes Clutch rail and clutch, plus 2 extra buttstock weights (three total) and LOP spacer kit as shipped, and the original 5rd Accurate Mag. Includes Wiebad MSP in Multicam. Minor scratches from use around mag well and bottom of buttstock pad (in pics).

It’s right handed, if that’s not obvious in the pics.

$1400 shipped CONUS

Elon Musk has expressed interest in buying MSNBC as the liberal network is said to be struggling.

'How much does it cost? The SpaceX boss wrote on X on Friday, reacting to a post that falsely claimed that Comcast is selling the network.

Donald Trump Jr had tagged Musk on the false news, writing: 'Hey Elon Musk I have the funniest idea ever!!!'
As X users reacted to Musk's post, the X owner added: 'The most entertaining outcome, especially if ironic, is most likely.'

Back in 2017, Musk similarly asked what the price of Twitter was.

Four years later he purchased the platform for $44billion and rebranded it as X.

It comes as Comcast is spinning off into a new company many of the cable television networks that were once at the entertainment giant’s heart as consumers increasingly swap out their cable TV subscriptions for streaming platforms.

Continue reading


Comcast's move to spin off its NBCUniversal networks would have been a staggering move years ago, with its fleet of channels previously among the company's most profitable assets.

Look at this news article from The Daily Caller: EXCLUSIVE: Yeti Accused Of Going ‘Full Woke’ After Years Pushing DEI, Sponsoring Trans Ideology For Kids https://dailycaller.com/2024/11/22/yeti-accused-full-woke-dei-trans-ideology-kids/

Cleaning up shop, Have the following for sale, Prices do not include shipping. PM If Interested Prices are OBO

I have Sphur 4602c - both sold
2 Sphur bubble levels - both sold
1 Sphur Low Diving Board - sold
Terrapin x - sold
Impact 4000 - $Sold
Vortex Razor HD 12x50 - $sold
Area 419 Hellfire 6mm brake never used - sold
TBAC adapters used both 30cal - both sold

For sale: Bix n Andy Comp Trigger. Single stage. 1 ounce to 28 ounces.

$SOLD shipped

I would like a 5 round ACIS 223 magazine and don't seem to find any. Lots of 10 rd. I have a Bobs SS sled but would still like a 5 rd for shooting off bags.
Are they available and where? Has anybody cut the bottom off a 10 rd and shortened it?

HOGUER is my RokSlide SN. Feel free to message me there if you are uncomfortable with these pics just being stolen from their site.

Aesthetic mount:
SCT-3001A SAKO TRG/Tikko T3/Tikka T3X 30mm 1.18” height, new in box with wedge, $190

SCT-3006 SAKO TRG/Tikko T3/Tikka T3X 30mm 1.35” height, used no box or wedge
$140

ISMS available:

SP-6602 36mm 6 mil, 1.5” height, like new in box no leveling wedge $280

SP-3001 30mm 0moa 1.18” height, used like new condition, no box or wedge, $350

QDP-6016 36mm 6mil/20.6moa QD mount, 1.5” height, like new in box with leveling wedge $400

SP-4006 34mm 0moa, 1.35” height used but excellent condition, no box or wedge, $350 SOLD

Split rings

SR-4000 34mm, 1.0” height. Used, very good condition, $250


View attachment 8551754View attachment 8551755

Do drones put off ir with their avoidance systems etc ? Able to be seen with night vision or a phone ?

Would one of those ultra powerful green lasers disable a drone ?

Was he in the right to save his life?

Or wrong to damage uncle sams property?

Bad messaging to our war fighters?

Login to view embedded media

The tube came from a cnvd-lr that I had retubed . I don’t have any specs on it other than its L3 filmed green tube. There are 3 small blems in zones 2 and 3 that are just visible in the pic. Had a few hundred rounds as a clip on and hasn’t been used since being out into a pvs-14 housing.

$2000

Purchased from PR infrared in December 2019. Used a handful of times, probably less than 200rds of mostly 6.5 creedmoor and 308. Can’t remember which direction but it has had .1-.2mil horizontal shift in everything I’ve tried it on. Pics coming.

17k

Not looking for trades

Putting together a new SPR-ish rifle. 18” rifle gas, 223. Will be primarily built as a “duty” type rifle, but also shot occasionally for some gas gun matches.

I’ve been eyeing the NF NX8 2.5-20 F1. At the price I’m paying for this optic, are there any better options at this price point? I’ve heard mixed reviews on the NX8.

Ive had a standard HMR many years ago, and a SV years ago as well. Liked both guns, and both shot very well.

Im looking at these 2 rifles at the moment. The hmr pro is $100 more, but does have a better stock IMO over the SV.

Talk me into 1 or the other.

Question for the Hide on their experiences with aging family members and holiday traditions. We're a week out from Thanksgiving and still haven't a clue on what the proverbial plan is. A lot has changed over the recent years. On my wife's side- her grandmother used to host her side of the family at her house and likely did so for over 60 years. She passed away last year so that familial tradition is now operating in a void this year.

On my side of the family- my Aunt used to host Thanksgiving for us but about 3 years ago health issues stopped her from being able to host and my mother (very apprehensively tried to fill in). Well my Uncle (said Aunt's husband) also passed away last year and my Aunt is in a rehab facility from recently breaking her hip. My own parents are having health issues of their own which complicates them from hosting Thanksgiving this year and now I'm in a situation resembling a Spiderman meme on who's going to catch the hot potato.




My brother lives in a different state and cannot come up to PA for a turkey dinner. My wife's sister lives in a different state but will be up for Thanksgiving but it seems that both sides of the family are looking at us to pick up the Thanksgiving torch this year. My apprehensions there are that we (1) just purchased the house this year and are still waiting on the furniture we ordered to be delivered and (2) Admittedly I'm very reluctant to enter this holiday as a host because I absolutely believe we'll end up being 'stuck' with it for years to come. To add to the 'joyful' nature of the situation, neither sides of our families necessarily interact with each other either so it's not like it'd be a harmonious joining of families if we did bite the bullet and hosted.

All that said- I'm not looking for any counseling on my family situation here, rather I'm just venting and wondering if anyone else has run into similar family issues with Thanksgiving/Holidays and if so- if they'd be willing to share what the issues were at the time, how they dealt with it, and what the hindsight option was.

Tis the holiday season and it brings out the absolute 'best' in families am I right?

-LD

LP Fuzion Ti-medium 6.5 PRC sitting in a McMillan A3-5 with edge fill. 26” 8 twist light Palma barrel. Trigger tech special trigger. I have 2 sets of bottom metal for it, Hawkins M5 DBM and Hawkins M5 Oberndorf BDL. It will come with both. Weight is 8.5lbs as it sits in the picture. 512 rounds down the tube. Would like to sell as a complete rifle but will split if needed. I won’t sell the BA unless the stock sells first.

SPF

SOLD This is a Retro copy of the M16A1 from the Vietnam era. It has an original period buttstock and pistol grip. It is built on a Harrington and Richardson lower, Aero Precision bolt, tear drop forward assist, Brownell's 1:7 upper, and is custom Cerakoted in Colt Gray. The barrel has a birdcage flash hider and bayonet lug. The gun is new and functions 100% with all types of ammo. The gun come with one 20rd magazine. You can see a function test of the gun below using 20 and 30 round magazines. $995 shipped to your FFL. No sales where prohibited, know your state and local laws.

Login to view embedded media