2 - Remington 700 RH/SA chassis for sale. The prices include shipping and may not come with action screws.

MPA Matrix: $900.00
Comes with side rails and internal weights. Unable to locate mounting hardware for the rails and weights.



Manners PRS-TCS: $1200.00
Doesn’t come with internal weights but includes Sikes Knob. SOLD


Thank you, Felix.

Found this in a local gun shop yesterday.
I don’t know much about them, and never owned one, just read about them online.

Based off of the serial number, it’s a ‘58 or ‘59, chambered in the ultimate fudd cartridge; .30-06.

I only stopped by to pick up a brick of GM215M primers, and stumbled across this in the used rack.
For $438 out the door, I think it was too good to pass up.

Mounted, never zeroed.

C672 FDE

$2400 $2200 shipped and insured.

Trades:
SR-25 stripped Upper Receiver
SR-25 Match Stripped upper and lower

Now that I load match ammo on my Dillon I don’t really need this sitting around taking up space.

Bought from a hide member some time ago and have loaded around 800 rds on it. Works great.

Adding 3 SAC lock rings
Does come with inline fab quick mount and the S hinges

$300 shipped
PayPal ff only or cashapp

Q Minifix 16” 6mm Arc with Proof Barrel.

Q Big Buttpad,
Full length top rail(have short top rail as well)
6 10rd Duramags
2 8rd Geissele Magazines
Q extended bolt handle(have smaller one as well)
Q 1913 rail pieces for accessories or bipods
Q boreguide
Qsert attachment piece to use an Atlas Bipod
Q Fix multi tool
Q Crutch (Bag rider)
Q Taper adaptor

I Also have the orginal box it came in and paperwork.

No trades at this time

Brand New Unfired.

$3000 shipped to your FFL

Send it level with Brandt built 90* mount. Comes with original mount and box. Thread matched a bolt for it because I was having issues with bolt handle hitting the knobon. Had to remove a small notch (blue sharpie) to clear bolt handle as well. Hindsight I should have just moved the scope mount

Still functions perfectly fine.

$210 shipped
PayPal ff only or cashapp

Looking to get something new and a little better than what I have now.
Looking at a 6.5 PRC
The two rifles I am looking at getting are a Tikka T3x Lite or a Browning XBolt Speed.
Both are pretty much the same specs 24" threaded barrel etc.

If you all were in the same situation which rifle would you go with and why?
Both of these will be hunting rifles. I have a Leupold VX-6 firedot sitting in the safe that needs a new home.

Plane crashed two days ago on a training mission. Plane wreckage was located yesterday in a remote area, but as of this time the pilots are still missing.

Yea, no shit huh ?

It's not a joke either.
You'll see the paperwork for it in these videos.

Login to view embedded media
Login to view embedded media
Not gonna ask what your thoughts are because they should be very obvious.

Like new condition. 6 rounds of 140 grain Hornady Match fired. $2,000 OBO. Feel free to make a reasonable offer. Will ship from my FFL to your FFL. Located in the Houston area if anyone happens to be local. All gunsmithing and assembly completed by Short Action Customs. I can provide any all documentation of build.

- Right hand, Zermatt TL3, standard bolt face, 0 MOA rail
- 16 inch Bartlein, FDE cerakote, M24 contour, 7.5 twist, chambered in 6.5 CM, threaded 5/8x24 with Q taper
- TriggerTech Diamond (single stage), set @ 1.5 pounds
- Q Cherry Bomb

I have a brand spanking new Elite that hasn’t been opened yet with 3 of the control bridges in FDE. I ordered this and before it arrived I ended up with another FDE Elite. Before I build this out would anyone be interested in trading me for a black Elite? It doesn’t even have to be a perfect chassis… (it won’t be after shoot it) I do want 3 control bridges so that’s a requirement or the money to boot.

My BNIB FDE Elite for your used Black Elite

Send it level. Will include 90 degree bracket and mount for spuhr.
200 shipped

Leupold MK4HD 6-24 PR2 MIL​

Very lightly used Leupold MK4HD PR2 MIL. Comes with the Hawkins lightweight rings it is in.

I only took this out to zero once and it sat in the safe the rest of the time.

Will come in the original box.

Feel free to PM me with any questions that you might have about it.

$1,250 Shipped.

CZ 457 Pro Varmint in XLR Element Chassis​

This comes with:

• CZ 457 Pro Varmint Barreled Action & Stock Trigger
• XLR Element Chassis
• XLR Element Thumb Rest
• XLR Element Fore End Weight Kit
• A419 30MOA Rail
• CZ 5 Round Mag
• L3i Chamber Flag Mag

Only has about 250 rounds of match ammo through it.

Feel free to PM me with any questions that you might have about it.

$1,200 Shipped.

I see that Nightforce sells two lines of one piece mounts. They have their Ultramount (looks like it was released a few years ago) and their “Ultralite” Unimount.

Is anyone aware of the differences between the two? It looks like both are compatible with their Multimount and dive board.

The Ultralite Unimount seems easier to find in local shops and at a better price.

Decided to go a different route and selling this stock.

$1100 shipped

Brand new
LRH
ELITE HUNTER IMPACT PRECISION SA
MCS-M5 SA MINI CHASSIS
M-24
ADJ BUTT SPACERS 1 INCH
ET GAP MOLDED LRH / PRO HUNTER
3.5" ARCA RAIL

I asked SAC if the Ugly Primer Seater would work on the NEXUS. They said no. Well, they were wrong. I couldn't find any info on the web where this was attempted before so I just did it myself. I cut a primer tube in half to fit under the handle and just fabricated a piece of aluminum plate to sit over the Nexus case holder. Works like a champ. I will be making a more permanent plate that will have pegs that slip into the spare cam stops holes, just to hold it in place.

I feel like welding will distort it. Scuff and JB Weld ?
Not sure the best way to make sure it’s perfectly aligned. Those screws don’t that’s for sure

More and more I have been fishing smaller western streams( the kind you can almost step over) and ran into a guy doing tenkara fly fishing. Light rod, no reel, small selection of flies. He seemed to really like but I was trying to get back to the truck before I lost all light so we did not talk long.

Anyone experienced with it?

Thanks in advance.....

Quitman Hugh School, Quitman, Louisiana. (The school I taught at)

Ag I students completed Hunters Education with a certification shoot led by biologist with LDWF. It was a fun morning watching the shoot.

REFRESHING!

Oh, don’t seem to have many school shoot-em-ups in Quitman or Weston Louisiana. Just lots of good kids from lots of good families. Makes one wonder why Louisiana is always the butt of jokes from those “educated” people from Boston, New York and Los Angeles.

I recently purchased a 21" 1:12 match barrel from a dedicated .22LR small business operator.
I also bought the bolt buffer, add on weights for the buffer, bolt silencer and other stuff to make
the AR-22 build more accurate. I have fired close to 500 rds of a variety of ammo beginning with
the bulk ammo of Federal 36gn 1200ish fps along with Brownings offerings and Aguila, CCI and
Blazer of about the same velocity. Also, I shot some SK auto match, Federal auto match and some
Norma tac-22 and CCI standard velocity ammo. The best grouping I could get was about 2" @50yds.
This is not what I was expecting from a "MATCH" barrel. I am very disappointed to say the least in the
accuracy of this "MATCH" barrel. I emailed the owner of the business who has these barrels made for
him and got about every excuse possible for the lack of accuracy like;
What scope are you using?
CCI standard velocity is the bare minimum for any accuracy.
It takes about 500 rds to get a good season on the barrel before the accuracy would settle in.
What lots am I firing?
Look . . . I get that some ammo is more accurate than another, but 500rds . . . really?
I bought a Savage axis xp in 6.5 CM and was getting MOA with Winchester white box right after unboxing.
What I'm getting at is. Am I expecting too much from what is supposed to be a match grade barrel?
To me it sounds like someone not standing behind their product and blaming anything else except themselves.
Some insight here would be helpful so as to not let this negativity get out of control.
I've seen some of the pics you guys have posted of pages of targets with 1/2" groups.

Area 419 Zero press (7/8x14 tpi turret) with accessories: Inline Fab quick-change plate & bin mount, eight (8) Zero die rings w/ wrenches, Zero modular shell holder system, bullet seating plate and Area 419 press dust cover (not pictured).






$1350 1200 1100 shipped in CONUS

First is a brand new/handled Mausingfield M7 SA. 308 BF. 20 MOA rail. One of the last few purchased from ARC before they went out of stock for good. Has been handled but never fired. $1200 OBO shipped to your FFL

Next is 500ct Berger 105gr Hybrids. Lot #3168. $225 shipped.

Looking to sell my LNIB Altas PRS bipod in FDE. You can see the condition in the photos.

Looking to get $300 shipped to your door.