Hello,

I wanted to try my first attempt at “bumping the shoulder” back ~0.002” when resizing fired brass rather than using the standard die instructions to size for the minimum chamber spec.

This would typically result in a longer case bottom-shoulder dimension than factory ammo by not pushing the shoulder back quite as far.

Those of you that have done this, how do you handle trimming cases? If I were to trim to the case trim length on the print, I would have a shorter neck since the shoulder is out farther. Are you guys keeping your brass just under max length and calling that good?

Kelblys just brought out a PRS rifle that once they sell 50 will meet all the production requirements. If I know anything about Kelblys the fact they have over 82 confirmed world records confirms they known what they are doing and produce quality products. They are also offering 10 percent off just use the code guncon25 not positive how long that will be good but I know Gun Con is June 28th in Ohio. I attached a link direct to the Element Rifle, they have a pretty sweet setup you can build completely out with optic, brake and bipod even. I actually have one on order myself and can't wait to get my hands on it. The rebarrels are even a bit cheaper than MPA we all know of your a PRS shooter ever little bit you can save adds up. Slide on over and check them out.

https://kelbly.com/precision-element-rifle/

For sale is a new rifle I pieced together over the last couple months. Rifle has 35 rounds on it, barrel not even broken in yet. I was planning to shoot PRS sportsman but I just won't have the time this year. No use having this rifle sit. No expense was spared and every part is brand new except the brake. This is a complete ready to shoot rifle that will make weight for NRL Hunter Light (12lbs without magazine) and PRS Sportsman (13 lbs with mag). With a CHAD brake( not included), it comes in at 12lbs 8 oz.

The rifle as it sits weights 11lbs 4oz.
-If you want to shoot NRL Hunter Light this lets you run a 14 oz can or brake and still make weight if you decide to not shoot the titanium brake included.
-If you want to shoot PRS Sportsman, a MDT 12 round Binder plate mag adds 8.3OZ or Non Binder is 7.3 Oz. This gives you 18 oz of wiggle room to run a can or different brake.
-You can use this as a badass hunting rifle. Printed (3) .4-5" 5 shot groups with initial barrel break in with Norma 143 Match factory ammo. This barrel actually shoots better than my 10lbs Match barrels with the same ammo, which is super impressive.

I would like to sell this as a complete rifle, as figuring out what parts and ordering/waiting on them was the hard part. This is a turn key rifle ready to compete. I don't want to part it out as that defeats the purpose.

All Parts are new except for the titanium brake:
-Impact 707R short action
-Impact .473 lightweight 75* Bolt
-Bartlein #13 Carbon Fiber 24" 1-8" 6.5 Creed Barrel with 5/24 muzzle threads (35 rounds on tube)
-Foundation Ezekiel Hybrid Stock/Chassis in Kiamichi camo inletted for Impact 737r/707r.
-MDT Precision Bottom metal with adjustable mag catch
-MDT Send it Level
-MDT Lightweight Single Pull Ckyepod with upgraded Knobs
-Trigger Tech Special 2 stage Flat set at 8oz / 8oz
-Area 419 34mm Hunt Rings, 34MM height
-Leupold Mark 4HD 6-24 PR3
-Salmon River Solutions Titanium Timed Brake
-Short Action Precision 2 round match saver

I put a little over $7K into this setup. Someone is going to get a monster deal and save some cash with a ready to compete rifle, no taxes and free shipping.

$6200 Shipped. I can also break the rifle down and ship you everything but the action if that's easier, your choice.

Mark 5 with tmr reticle
With arc rings

Always wrapped ,in great condition , honestly not that many rounds on it, used on my 6.5 hunting gu n
$1400 shipped conus

No trades






[



ATTACH=full]8714572[/ATTACH]

Glock 17 Gen 5 with Holosun 508T. Slide work done by Jagerwerks. Dawson iron sights. Selling because I have more than I shoot.

$500 shipped.

Razor G2 4.5-27. EBR-7C MRAD. Glass is perfect. Slight ring marks. Comes with throw lever and Defender flip caps.
$1600

View attachment IMG_3967.jpeg

No point in trying to reopen San Francisco’s Alcatraz… when you can do better.

Airfield deep in the Everglades, surrounded by swamps full of gators and pythons and water moccasins and, well, rednecks who think “You got a nice mouth, Jose…” will be a deportation processing facility.

DHS has approved. So now, Pedro, you get to await your due process in a tent. In the Everglades. And if you try and get off the island… well, good luck with that!

Bet after a few days, folks are begging to hurry up that due process and get them back to El Salvador!!

Need one out near Ft Huachuca, too. Scorpions, rattlers and 115 in the shade for miles in every direction is also motivational.

What did one gator say to the other gator? Not bad for Mexican food!!

Sirhr

I have two new in the box Woox chassis. One is a Furiosa and the other is an Exactus. Both are midnight grey and black, and fit 700 short actions. They are cut for DBM and take Badger, Hawkins, SOL, etc. The Woox website says max floating barrel size is 1.17”. I can take pics of measurements or put a barrel blank in it to see what fits.

Furiosa: Remington 700 DBM (AICS) Short Action - Clones included / Midnight Grey - $900 shipped

Exactus: Remington 700 DBM (AICS) Short Action - Clones included / Midnight Grey - $600 shipped

The MDT is an ACC Premier Gen 1 Chassis (fits 700 Long Action) with SRS-XF Skeleton Rifle Folding Stock. The mag cut is CIP 3.850". Has MDT Vertical Grip and 1 buttstock weight. I bought this to use while waiting on a McMillan. Only fired 5 rounds through the rifle when it was in this chassis. It's basically like new. The cerakote in the folding mechanism started to peel in the pinch points immediately upon trying out the folder. It's hardly noticeable and completely unavoidable, but wanted to point it out. The chassis has not been bedded. Comes with the action screws. $1125 shipped

I can take additional photos or videos if needed.

Primary trade interest is a Foundation Ezekiel in long action. Would also take one in short. Can add cash to even it up. Would also be interested in any 700 clone action with mag bolt face in short or long action.

Anything else, you are welcome to ask.

I have 2 and 1/2 bricks $450 shipped.
All same lot.

Isn’t it the left who has been burning the fuck out of cities and attempting assassinations for the past five years?

Looking at one since it’s got a free tax stamp right now. I’ve got primarily Dead Air suppressors at the moment since I love the Xeno brake.

Any reason not to buy one?

Up for discussion:

Outlier Chassis for Howa 1500 w/ MPA EVG Grip. Can include factory grip too: $350

First time seller so I can hop on facetime, phone call, whatever so you feel comfortable.

Ergo TDX 0 grip - $30 shipped SOLD

The grip is a new takeoff from a complete rifle

Discreet Zelle preferred

PM me before posting here to avoid scammers — I won’t contact you first

Hi Folks,

I would like to sell my Tangent Theta 5-25

$3800 shipped

$200 Sphur 34 MM 1.5” mount if you’re buying the scope.

PayPal/Zelle/Venmo

F

Catch and release. I bought this do to a chop and thread job...then I picked up a shorty b/A on here soon after. Never fired, just want to break even.

Original add:

$475 shipped & insured CONUS to your FFL from me directly (with my ID in the box). Zelle preferred.

Up for sale:

Like new Tangent Theta 525P GEN3XR with AIF turret. It comes with box and paper.

Price: $SOLD

shipped & insured to lower 48, Paypal F&F, locally available in Greater Los Angeles/Orange County

PM me if you have any questions. Thanks!

I wonder if there is any serious radiation leaking from any of the destruction in Iran? I haven't heard any mention of this

I've got a brand new Larue match rifle with the Mlok rail and Badger Ambi Safety.
$1700 shipped to your FFL.

LaRue Complete 18" .308 Match Grade Upper
It’s widely-recognized that we’re crafting the most accurate production rifles on the planet. You can buy and drop this new LaRue MGU onto your LaRue lower, toss on a magnified scope, use match ammo or your own handloads, and easily shoot under 1-inch groups at 100 yards.

SPECS:
Caliber: .308 Win
Barrel Lengths: 18.0”
Rifling Twist Rate: 1/8
Barrel Life: 10,000
Gas System: Direct Impingement

Killing dogs and beating up old ladies and mentally handicapped seems not to be a good training regime. First time they went first- e- cuffs with a grown man they lost badly .

I'm probably the best stocked I've been in a while right now. I have plenty of Vortex, Nightforce, Swarovski, Kahles, Zeiss, Leica, Leupold, and ZCO just to name a few. As always, call for best prices and let me know if you have any questions at all.

I have to give my compliments to their marketing team. I wasn't even in the market for any cleaning services, but I am now. Well played. #WTF