I have 2 Brand new in box Proof Research 6mm/.243 Competition Profile 7.5 twist Stainless steel Barrel Blanks for sale. $350 shipped. Will do $675 shipped if you go ahead and buy them both together.

I am listing up a Winchester Model 52 C repeater Bull Gun. It is a true bull gun not a heavy target that often gets called a bull gun. Barrel is 28" 1.125 at breach and 7/8" at muzzle. This is the rarest of the cataloged Winchester 52's. I have only seen two in 40 years. Fewer were produced than the 52C Sporting rifles. Has scope blocks for Unertl type scope. Several scopes available if wanted. It is original in every way and great condition. Very accurate. 1950.00.

Will post up photos this evening.

Steiner T6Xi 2.5-15x50 in a Seekins MXM 34mm mount. Like new other than a ding on the elevation turret. Hasn't even left the house.

SOLD
PayPal F&F, Venmo F&F, Zelle.

NO TRADES

SOOLD

For Sale or Trade: FDN-25X CB - 5-25x52mm with H59 reticle
Scope was briefly mounted, in perfect condition, no scratches, comes with blue illumination, internal bubble level, competition elevation dial, and folding magnification throw lever
MSRP over $4500, asking $2300 +
Interested on trades for ATACR 7-35, Kahles 328, razor gen 3 mil, Zero comp, tangent (plus cash where needed)

Atlas CAL BT65 and BT69 bipods, both have area 419 Mounts installed.

$SOLD EACH

PayPal F&F, Venmo F&F, Zelle.

I recently threw together an 11.5 to run as a dedicated suppressor host for a YHM Fat Cat. When I ran some PMC m855 over a Garmin chronograph I got ~2750 fps, which is about what I usually get with that ammo out of an 11.5. When I ran the 55gr Sabre Blades over the same Chronograph, I got around ~2850.

Has anyone experienced something similar? Just wondering because just shooting the stuff, I got the impression that it was a bit underpowered, because I had to open my gas block up a tick to get it to run the way I like. 2850 is pretty fast out of an 11.5.

Black Arc 53gr only get me 2900 by comparison and the Black Arc load is hot.

Up for sale is a certificate for a 5 day South African safari hunt. Here’s a link to the outfitter. It’s a $9000 package. There will be some extra cost to ship animals harvested back to US or wherever you live. They will arrange all this for you. You can save by bundling with your buddies.
They have stateside reps you can call and discuss your plans with. Tim is very helpful. I’m not going to be able to make this unfortunately so selling the cert for $500.

NFC557, Mil-R reticle, in NF Magmount, with NF clamp on throw lever. Tenebraex front and rear caps. Asking $1400 shipped and insured.

Has anyone run the .30 cal Abel Biscuit on their gas guns?

I'm looking for a new .30 cal can but want it to also be able to function as a low back pressure can on gas guns.

Usually this means the can isn't good on gas guns (more back pressure than an RC3 or KAC) but then is still louder than it's comparables on bolt guns.

This will likely get rotated between a 14.5" 5.56 AR-15, 16-22" 6.5CM SP10, and a 6gt bolt gun.

Also wondering if the Biscuit S is worth the size trade off.

I have a like new Apollo 11 LFA with a holson dot site and 1 extra 17rd mag and a iwb plastic holster. Pistol shoots fantastic but not my thing. I've put Maybe 100 rounds trough it.
Have the carry bag and all things that it came new with.

Asking $925 Shipped to your FFL.

Suffice to say that I’m interested but I have a bit of sticker shock on the price mentioned. More at the above link.

-LD

I have 2 RimX mags for sale. 1 10rnd and 1 12rnd.
Selling together
$220 shipped
Paypal add 3% or pay fees(business account),Venmo or cashapp

Atacr 1-8 ffp FC-DM reticle on a super precision mount. Optic and mount havent been shot with. Has sat on a gun i never even take out of the safe.

Would trade for a plxc with a griffin mil reticle plus cash.

$2400 shipped

Looking for one of these. Anybody got one? Im shooting kahles match at k&m this weekend if anyone wants to do ftf

Ladies and gents; I have for your consideration, a slightly salty, older Geissele mk13. It's not "damaged" in any way; simply "used", and looks that part. I'm not a very big fan of this one; got it from a buddy to try out, and its just too short and slim for my liking.

Works great, mounts and functions like it should. It's used, as i mentioned already. Wrench, barrel nut, anti-rotation screws; its all there. This would go great on that battle worn SBR, or micro truck gun.

Ideally, Sold

Looking for some load data for a 223 PRS build i have in the works. Anyone shooting something close to this?

-26" barrel 1:7T
-Under 3000fps
-up to 77 gr projectiles
-AICS mag length

Prices are shipped USPS. Prefer Zelle but will accept Paypal G&S if you cover the fee

Shotmarker one new in package - $SOLD
Detour Dynamics Ultimate shotmarker frame new in package - $SOLD

Will also trade for new/like new autotrickler V4 / X120i setup

Prices are shipped USPS. Prefer Zelle, will also do Paypal G&S if you cover the fee.

6BR Norma Lapua brass 4PH6046 (new) 5 boxes x 100pcs - $SOLD

6BR Norma Lapua 105gr Scenar-L OTM (new) 2 boxes x 50rds - $SOLD

6mm Berger 105gr hybrid target- 1000pcs - $SOLD 1 box, 500pcs - $SOLD

6BR Norma Sinclair/Wilson (SIN-6BR) inline micrometer bullet seater (new) - $100

6BR Norma Wilson (FLD-6BR) Full Length sizing die (new) - $80

6BR Norma Redding Competition 55317 seating die (new) - $SOLD

6BR Norma Giraud trimmer holder and cutter (new) - $SOLD

Hodgdon Varget powder (8 pounds, sealed) - $SOLD

small rifle match primers- 1000 - $SOLD- cannot ship, local pickup only

Flat right hand 700,
140 shipped

Been lurking around a lot here and finally joined! I get into analysis paralysis pretty bad so earlier this year I figured before I start buying things I need to take a class.

Stumbled upon Fritz precision shooting out in Lewiston ID and reserved a spot for me and a couple friends for the fundamentals 2 day course becuase the price was just too good. This included all gear, lodging, and food. Just needed to get there and pay for ammo. It was an incredible 2 days of learning and experience. My prior experience was only out to 200 yards. Day one we sighted in at 100 yards, then calibrated our G7 out at 1220 yards (6.5CM). We were practicing positions and other fundamentals the rest of the time between 600 and 1100 yards. Funnest weekend I’ve had in a long time. Great people, small class size, and really great training. How friend Chris Costa showed up as well to help teach so we were 2 amazing teachers to a group of 5.

If you have thought about going, I highly recommend it. Don is a fantastic teacher, and if you don’t own your own equipment it’s an even better deal. I was able to try out the three scopes I’ve been most interested in (element theos and vortex razor gen 2 and 3) as well as some sweet chassis builds. Can’t beat the value for sure( I looked!). Now I just need a second job so I can buy things I don’t need

There are more than just fundamentals classes from him, and if you don’t see something on his site I’d just call him, they teach all kind of LEO classes, there is probably something for you! Happy to answer any questions!

Bought these awhile back . Just don’t need them.
Dillon flip top bullet storage containers
11 total . Each holds 50
Thanks for looking
Cross listed

Cz 457 factory barrel cut, crowned and threaded I think it's 20 inch, eabco stainless threaded.. I think it's 24 inch, boyds stock, have 1 5rd and 1 10rd mag, arken ep5 brand new 5-25 in badger rings take it all for 1350 or 850 for the rifle

Listing 3 30 cal MB type adaptors as pictured. 125 each.

I have an unused and still in box BE Meyers KIJI K1-3 IR laser illuminator. This has never been mounted or used. Still in original packaging. Can send additional pics if needed. $700 shipped