WTS new unmounted Swaro. It has never been out of the box. I bought it for a project that fell through.
Trades - none
Price - $1600 shipped CONUSA (insurance is on you)
Payment - cash, Venmo & PayPal (you eat any fees)

292 Pieces of once fired GA/Alpha Brass
LE Wilson Full Length Bushing sizing die with bushing.

Brass: $250 shipped SOLD
LE Wilson Die: $75 shipped with bushing SPF

HOLOSUN 509T-RD OPTIC: Holoson 509T Gen 1 Red. Perfect glass. Perfect solar screen. Shows only wear from EDC carry. Always holstered.
Very clean. Will ship with the OEM box and all OEM materials w/o any extra OEM batteries in the box:

PRICE: SOLD

Accepting PayPal FF(NO NOTES) or Zelle(NO NOTES). Paypal G&S buyer pays fees

PM me first to avoid scammers. I will not PM you.

Rifle,CZ MTR 20inch factory stock ,acutac bipod,sand bags on rear,6x20x50 athlon
SK match red ,SK orange HV and Federal Gold standard
I’m having a issue pulling left this has become an issue with the MTR
I’ve tried focusing on what is causing this issue I’m leaning towards the stock just can’t get a good fit with it and I’m assuming I’m trying to adjust during trigger pull. Either pushing with my shoulder or pushing with trigger hand,any opinion or input would be appreciated very accurate when it comes together just can’t seem to get comfortable with the factory stock.

Update: Got what I needed. Thanks! Does anybody have any they’re not using? New or a few times fired is good with me. Prefer Alpha but I’ll entertain anything. Thanks in advance.

Thoughts? And, was there ever a definitive cause given for the reported TriggerTech trigger issues?

SOLD

Selling my Vudoo barreled action 18” MTU Ace. Gen2 with 90* throw. Will come with 2 magazines and NO trigger. Thread protector is included (can see it in the larger pic, but wanted to be sure I said that since it wasn’t shown separately on the close up pic of the muzzle).

Asking $1150 shipped. I prefer PayPal, but can discuss other options depending on the buyer.

Rifle shoots very well. I shoot suppressed and it keeps groups in low 3s at 50 suppressed with SK ammo. Will shoot even better with CenterX or not suppressed.

While the extra 4 mags in the picture are not included and the Triggertech 2-Stage trigger are not included, I would consider selling them separately or bundled. I may use them for another build, but could be swayed into selling them. I also have a Foundation Centurion dark distressed that could be bundled as well. None of these are included at the above price.

MDT elite blue r700 SA chassis. Has a brass weight internal weight, dampeners, rear weight, low pro cheek riser, and a gray ops thumb rest installed. Phase some barricade beauty marks so don’t expect a brand new chassis.

Comes with 3 control bridges, stock cheek riser, rear 1” extension, extra set of dampeners. If you need external weights I have some to go with it as well.

Asking 1450 shipped.

Manners LRH, 700 S/A
Mini chassis
Not sure what color she is
Was never bedded
Sawtooth rifles arca rail
MDT bottom metal w/ adjustable mag catch
Green tape is holding action screws

SOLD

I have 2 1 Leofoto 50% off certificate. $SOLD. I’ll send you a code and/or pictures of the certificate.

Thanks

Anyone looking for a heavy steel arca rail there is a new NC company called Kil-Spec making them. They don’t have a website yet that I know of but they are on Facebook. I’m going to pick up a 16” for my 6ARC AR to add some weight up front. They have some videos and weights and prices in their posts.

Looking for Area 419 parts for my press, message me if you have:

Bullet tray
Bullet seating plate
Bullet / cigar tray

Also looking for (2) Gray Ops AMP annealing blocks for holder storage

Given that SEmi-Autos tend to chew up brass a little faster than bolt guns are you guys splurging on quality brass for precision semi-auto? I guess the AR isn't too hard, but I was gonna do some M1-A/M-14 stuff and that thing kicks the **** outta brass (Not exactly precision, but I can dream).

I have a well used 7-35 Mil-C

I have shot this scope for several years and it runs flawlessly. It does have a few bumps and bruises and the glass has a scratch on the coating. Being perfectly honest I can’t tell the scratch is there looking through the scope. If didn’t tell you it was scratched you would never know it.

I will post pics when I get a chance.

$2000 shipped buyer pays for insurance if wanted...

*Optic not included* Selling as a package that can be used as an excellent low recoil PRS setup and optionally used used as a coyote hunting setup if desired. Build is as follows:

Lone Peak Fuzion SA
Proof comp 26” barrel chambered in 22 GT - about 800 rounds on the barrel
Trigger tech diamond 2 stage w/ pro curve
Aero Solus 15” chassis
380 pieces of alpha 22 GT brass, fired 2 times
200 85.5 Berger bullets for load development in your rifle
Forester 22GT bullet seating die

Only thing you will need to get up and running is an optic, a muzzle brake and GT sizing die. I can provide a match master FL sizing die for additional cost. After those things are taken care of you’ll have everything you need to go.

Asking SOLD shipped to your FFL. For additional pics or questions, don’t hesitate to reach out.

For sale is a Leupold MK5 3-18 FFP mil, with the PR1 reticle. I just don’t use it. Scope is in great condition. Comes in the original box with all parts and paperwork.

I am asking $1250.00 shipped

Venmo or UPS money order only.

Ive got a super nice, practically new, 6-dasher with kelbly atlas tactical action, 19" 4 groove bartlien fitted by southern precision, aero precision chassis, teiggertech diamond. This rifle is an absolute hammer, itll consistently shoot in the low .1s at 100 and sub 1/4moa at 200. I have confirmed dope out to 1500yd also. Runs 108 berger at 2760. Barrel has right at 400rd and action less than 100. Includes load data, dope data and 100pcs of 4x fired alpha brass. Dies available if needed. Below is a fresh 5shot group at 100yd with 108berger and varget.


Will take 2700.00 for rifle minus scope or 3300 with 6-24 zeiss. Please check my feedback on accurate shooter under oneraggedhole

For sale is a like new (50 rounds fired) Glock 19x with ATEI work.

Comes with factory box and mags
comes with Great Lakes Customs chopped beavertail


ATEI pro cut for holosun 509t
ATEI cerakote to match the 19x frame
ATEI (great lakes customs) hybrid stippling (he also eliminated the front lip on the grip/magwell)
Trigger Guard undercut
Dawson Precision Suppressor height sites installed by ATEI lower co witness
Holosun 509t GR X2
Trex arms OWB holster
Trex arms sidecar with mag attachment

Looking to trade mostly plus cash on my end for high end scopes or rifles.

For sale is a new, never used MDT CRBN short action carbon fiber stock. I got this for my son but he prefers his XLR chassis better. Comes as new with all hardware in original packaging.

$1050.00 shipped

Venmo or USPS money order only.

PM me with any questions.

Just received this today….Catch And Release!!!!

I have a Manners Carbon Fiber LRH for sale. It is new and for Remington short action or clone, r-hand, M5 bottom metal inlet, and Proof Sendero barrel channel. No mini chassis, will need bedded or sent back to have the chassis installed if that’s what you want. Carbon fiber finish only, no paint scheme.

Manners LRH $800.00 shipped.



Venmo or USPS money order only.

PM me with any questions. I will load pics tomorrow morning.

I have 3 separate pieces of Hawkins M5 BDL bottom metal for sale. All are new in the package with pillars and hardware.

My plans have changed and I won’t be using these. Check out my other post for some Manners stocks for sale also.

I am asking $145.00 shipped for each of these bottom metals.

Venmo friends and family or usps money order only.

PM me with any questions.

I've been looking around at aftermarket barrels. Trying to decide between L3i and the Lilja barrels. I won't be shooting match grade ammo all the time. From a little searching, it's been said the L3i barrels aren't as picky about ammo as the Lilja barrels. Does this sound about right or, was I reading misinformation? Also, will either one or both fit the standard Varmint factory stock with a little work? Thanks!

We always knew, but now we have the evidence and the DOJ:






Login to view embedded media