Selling my barely used Steiner H6Xi with Reptilia mount.
Works great, glass is very good, turrets work well. Haven't had any issues with it just planned on putting it on a hunting rifle that I didn't end up building so it went on an AR that didn't really need it. So here we are.

Asking $1250 shipped with the mount

Selling a Geissele Super Duty rifle with a 18in (rifle length) Bartlein barrel spun by Craddock precision. This was a complete 16in Geissele rifle but I had the barrel swapped with the Craddock. This thing shoots great but I honestly only shoot bolt guns now.

It will come with the following

-Arisaka adjustable butt pad and bag rider system
-Radian ambi saftey
Surefire SFMB
-Annex defense arca rail
-Geissele ssa-e x trigger
-18in Craddock mk12 barrel fluted (bartlein blank) 100 rounds on it.

Asking $old shipped to your FFL
Payment via Venmo, Zelle, PayPal f&f or buyer pays fees.

Let me know if you have any questions.

I have a Triggertech Diamond Flat Gold Simlngle stage looking to sell. I switched to the Two stage and don’t need this sitting around. Looking to get $305 shipped.

For the past 2 years, I ran my Vudoo in an XLR Envy Pro, and it ran like a sewing machine. I have shot two matches recently after putting it into an ACC Elite and have had feeding issues. on about 40% of my stages. I have a barricade stop, so it is not pressure on the mag. Can someone that has reliable feeding snap a pic for me on the position of the mag catch line? I have played with multiple settings and can't seem to dial in it where I want.

Here is where I currently sit.

Selling my WBP Mini Jack 5.56 pistol. I've upgraded it about as far as is possible and it's an incredibly soft shooter.

Upgraded JMAC parts are as follows:
MMS 8" optimal rigid mount handguard
mini jack 556 1913 gas tube
1913 dust cover
556 mag funnel

I've also added a KNS adjustable gas piston, magpul grip and a griffin armament dual lok flashhider. It includes 3 x 30rd mags as well

Feel free to ask if you have any questions or would like to see additional pics. The suppressor isn't included (but can be as it's on a form 3 and I'm the SOT holder) and neither is the red dot.

Asking $1650 1550

The title says it all.

I just picked up a Rachel Precision Brux on a RimX action with the ModX bolt.
The guns shoot beautifully- tight groups at both 50 and 100 yards.

But here is the issue — I have 2 RimX mags with extensions and they are well built, but no matter how I adjust them, they do not feed consistently, so I decided to try a polymer Vudoo mag, as I had some with me and BINGO—- flawless feeding—— has anyone else experienced this.

When watching the rounds feed, it appears that the round hits the chamber a little low and shaves some lead and the cartridge hangs on the lower (6 o clock) aspect of the chamber. Probably about 1 in every 20 rounds does it. SO…… I adjusted the mag to sit as high as possible however that did not fix the problem— I believe the issue is the angle on the front edge of the rimx mag.

The Vudoo mag on the other hand feeds flawlessly over hundreds of rounds.

Thoughts??

Hi!
I'm a beginner, but just shot my first hunter game over the weekend. Looking to learn more!
I looked through the discussions here, tons of useful info! Glad to be a part of this community!

Im starting out my journey building an m40 and need a good bit of help (particularly finding the right stuff!!) I was going to be building the m70 which I have a 1948 dated rifle for but was told for my purposes (reenacting) it would be hard to utilize in a historically accurate manner as most events are mid to late war. I particularly need pictures of the floor plate, sling swivels, and all 3 cuts on the reciever. I also need recommendations for a few things someone to do the milling work, scope coloring, and a stock maker. I figured best bet would be to find the small parts first and get the scope done and whenever I find the right rifle ill send it all out where it needs to go. Thank you in advance for your help!!!

building out another competition .22lr this time in a AR platform. Looking for an AR lower with a cool/funny or unique roll mark.
im fine with a stripped lower or a complete lower. tho i will be putting the magpul PRS stock on it so don't necessarily need a stock to come with it. looking for black but can make other colors work
show me what you got and a PRICE.

New joins / no feedback = no deal.

This rifle appears to be correct for an original M40. Someone hit the opening of $1300 which is cheap as hell for that. It’s one of the Remington archive rifles so very likely their internal or museum sample.

KRG enclosed forend with W3 backbone and trigger guard (700SA)
Includes -
Enclosed forend
backbone (not separating)
trigger guard
arca rail
SAP 2 rounder
You can grab any rear section (bravo, xray, or W3) and bolt it to this and have a complete chassis.

$350 shipped

I'm selling my Vortex impact 4000 in perfect condition with everything in the pics. I also have a few of the reflective targets to use to sight in the laser. Price $1,500.View attachment IMG_5843.jpeg

Guys
I can really use some advice here

I recently bought the new Tikka Ace Game in 6.5 PRC
Ive come to realize Im not a chassis guy
So I want to set it up as a hunting/Tactical rig
Im looking at Manners lRH stocks
That will help with the weight
But...I'd really like to be able to have a mag/ Bottom metal set up that will accommodate 6 to 10 rds of 6.5 prc

So..What bottom metal/mag set up should I be considering?
I actually have the ctr metal and mags ,but I've read that they don't work very well

FDE Bravo 10/22 chassis (mounted but never fired)
Minimalist spigot
Tooless LOP
Backbone NV bridge (shaved down to match better with 10/22 rail height)
Kidd rear anchor
Hook cover

$450 shipped

(Enclosed forened not compatible or included)

This is a brand new bipod ready to do all the competition tricks. Standard length legs. GEN2 improvements. Clamps to arca or pic.

$495 shipped to you.

PM for best results.

In truth it is already a cesspool but can it get worse with a liberal, muslim mayor. I'm betting it can.

Mamdani's win signifies hope and a political voice for ...​

The Guardian
https://www.theguardian.com › us-news › jul


·翻译此页

Steiner T6Xi 3-18x56 with Badger Ordnance condition one mount. Never mounted or fired. Scope only mounted to base. MSR2 reticle. Bought for a build but changed my mind.
bought both from Europtic for $1950.
$1499 for scope and $302 for mount.
Can sell scope for $1000 and mount for $200 shipped OBO. Zelle or postal MO. Thanks

Does anyone know the weight of a seekins havak hit without the barrel? Trying to see if it makes sense to put a carbon fiber barrel on it for a hunting rifle

I have been using my Sig 10k gen2 no problems.
Then today half way through the day they will ping a target, give me the distance but shows no dope?
It was working one minute then stopped?
I have resynced the profiles, taken the battery out for an hour, checked I am on "Elite" in the settings.
Does anybody know if there is a reset for them, manual does not say.

*FOUND*

I have an MDT Elite chassis and the Gray Ops external weight kit (2.5 lbs.) MDT also offers an under barrel/inside the chassis fore end weight that is approximately 2.5 lbs. I was thinking that weight below the barrel might be advantageous because of a lower center of gravity which might help the rifle settle into a bag better. Any one tried both and have an opinion?

Looking to sell this nightforce F1 NXS 3.5-15x50mm MILSPEC marked scope. Has the H58 Horus reticle. Some salt on the body but crystal clear glass. Perfect for clones. Includes butler creek caps. Asking $2025 shipped.

I just built my first AR15 and it is an 16” barrel mid length gas system rifle

I installed and Aero precision enhanced buffer tube and screwed that in all the way till level with inside of receiver.

I installed an JP silent capture spring and the buffer head sticks out about 0.060” as JP says that’s the max it should

My concearn is that, I was told that I should be able to fit the thickness of 2 quarters between the gas key and the lower receiver with the Bcg fully inserted.

I have a gap of about 2 quarters however i can’t slip the quarters into the gap as it’s too tight

Am i ok? Or should i shim the silent capture buffer system more? Causing more preload witch JP says not to do?

I just don’t want this receiver to get hit by the Bcg I can’t buy another

In my state

Recoil X suppressor brake with silencer co bravo threads. Fits omega and scythe and whatever comes with those those thread patterns. Probably has less than 50 rounds through it

$150 TYD

Scalarworks leap 08 1.57" 30mm scope mount. Brand new. Never ended up using it. $250 shipped. Pm me, don't reply here to avoid scammers I will not reach out to you so don't fall for scams. Thanks in advance for looking.