Selling a few things today. Will upload pics later today. PayPal FF, no notes. No trades right now.

Login to view embedded media
LMT MRGG-S 6.5CM 20" Barrel NEW SOLD

OEM Glock 17 Gen 3 Stripped slide with ACRO optic cut and top/side serrations done by Wager Machine Works. Comes with suppressor height iron sights. Have a used OEM barrel that I can throw in for another $50 bucks. $300 Shipped

B5 Precision Stock Medium FDE SOLD

Badger Ordnance 1.54" 0 MOA 34MM mount with ARC and diving board. Custom cerakoted in LMT FDE. SOLD

New in package KAC M-LOK index stops. KAC p/n 113886
$SOLD each shipped

For sale is a almost brand new K540i scope with the SKMR+ reticle and left side windage (Model 10723). I say almost new because I took the scope out of the box to look at it. It has never been mounted in rings, just placed on a sandbag to look through glass.

I don't have any pictures right now but can snag some tonight.

Price is $4,200 shipped & insured to the lower 48 OBO.

This is a catch and release! Bergara B14R built by Jonathon at Modacam. Got this recently from a hide member and he had targets from lapua test center that were very good! He purchased this from fred at bison tactical! It has 24 inch 1.20 straight benchmark 1:16 twist barrel! Area 401 rail and area 401 extended bolt and knob. Also has Eric Cortina bolt shroud! have way to many of these 22lr rifles and need to start selling some. Selling for what I paid! 1300 shipped. Ffl must receive shipment from private seller!

Someone out there has to have a setup close to this SA zues in a Grayboe pheonix 2.0. Had this made and I never use it. It’s pretty slick so I thought I’d see if someone out there happened to have a similar set up.
Holds 2 bolts and 2 24” barrels, room for a can, mags and other accessories as well. You’ll likely need to trim it for your scope. Custom made by “GunFoam”, Fits a vault 700. This is for foam insert only. Looking to get $125 TYD, I believe I paid $225. $250 for the vault 700 and foam

I've looked and did the google search ( wafwot) for a 223 bolt for a SA 700. Next stop will be the gunsmith , thought I'd ask here first.
Thank you

Looking to trade or sell the following for an AI AT-X:

- Straight Jacket Armory bartlein 3b .308 barrel. 1:9 twist. 22”. NEW IN BOX - $700 or trade for new 6 Dasher barrel, or towards a 22 or 6 creed carbon barrel.

-Spray painted Elite Sand Mid length bridge. $180 or would trade for a long length bridge

This is brand new and is their universal SA inlet.

SOLD

Thanks

I’m having AB Quantum and Kestrel 5700 elite x issues… it’s probably operator issues.

Tall target test good, I have a Doppler for my mv, firmware is good, and my custom drag model is off by a few tenths at distance (800-1000). In the app I just correct the ballistics using cdf because I know my mv is good. Easy peasy and works everytime no problem.
I have had a kestrel for a while but never used it but recently decided I was decent enough to possibly get some use out of it. Send my profile to the kestrel and it’s off by .3 mil at 1000. It’s like my cdf didn’t transfer to the kestrel? Also I noticed that even when I turn the pin off and up my Bluetooth the environmentals don’t update in my phone app. I have to manually update them.

I’ve been able to get the kestrel really close to my app solutions by creating a new profile, using g7, and then manipulating mv (inside 600yds) or BC (600+). I don’t like this because what if I go shoot in the mountains and have a velocity change? I can’t put in the actual mv because I already had to play with the actual mv to get the kestrel tried. The app is so easy… I must be doing something wrong in the kestrel? Is there a way to manually enter cdf in kestrel with the custom drag curve? Help!!!

This one is just the weather meter version, not ballistics. Asking $125 shipped to lower 48 PayPal F&F

asking $600 shipped. Droped to 550 shipped.
Can remove stickers if need be.

Cole Tac Mag pouch used maybe 2 times. Great Condition still just went with a locking mag pouch.
- $25 shipped give me a few days to ship please.
PayPal F&F lower 48 only please.

I have some 10x42 vortex vipers fresh back from vortex and they made them almost like new. No factory box. $300 shipped. Drop to $275 shipped.

Selling a a RRS TFC 24L tripod (ball head not included). One scratch on one of the leg joints. $750 shipped, selling to fund a new USPSA build

Looks like you guys got Carney. Sorry boys and girls.

Recently received this scope brand new. Mounted, shot 6 rounds and realized I’m probably not going to use it and my brakes and shocks are smoked on my truck.

The glass is phenomenal. Pass it on to someone who will appreciate it. Currently in some Hawkins 34mm rings(lights, 1.27” H) which are included. Come with original everything, tenebrex and sunshade. Will update pics tomorrow.

$1500 shipped via Venmo or Zelle.

Selling one more! Stainless with the gold tuner. Bored .264 with 5/8-24 threading. Asking $425 shipped to you

G'day all

Im scratching my head on this one. Need some assistance.

Running a 6.5 PRC
28" Custom barrel SAAMI Chamber (.533 web)
on tikka t3 action.

153.5 Berger Hybrid Target
ADI 2217 (H1000) at 50.5grn (4.5grn below book max)
Surplus Indian Army LRP
Norma Brass trimmed to 2.015"
Loaded neck OD = .2935
Shoulder bumped back 0.002" after full length resize using SAC bushing die and mandrel
COAL 3.05"
Approx 25 thou jump to lands
Case capacity measured to 70.5grn h20

Velocity measured to 2915fps via Xero chrono which is super fast at this charge weight according to the book...
Using GRT this load is showing a pretty mild pressure curve...and certainly well below max


But, I have been getting excessive pressure signs; from the minimum charge upto 52.5grn
Heavy bolt lift/clickers
Cratered primers
Blown primer x2 once with a stuck case and torn rim from extractor claw
Ejector swipes
Primer pockets lose/unuseable after 2 firings on some pieces of brass.

Before you crucify me for running over pressure I have tried 2 different bullets and 2 different powders starting low and working higher. All showing signs of OP. 50.5grn has been fairly stable except for the clickers.

Really the only other variable to change is the brass (I've heard Norma can be very hit/miss on its QC and often produces soft brass) and I am heavily leaning towards this as the problem I am facing and wondering if anyone else thinks could be the issue...
However it dosnt explain the vast increase in velocity I am recording compared to what the book is saying...

Any insight on wtf is going wrong with this would be helpful. I have thought of everything I know and will be first to admit I don't know everything.

Okay, should I drop the coin on an 8 pound jug of StaBall Hd, or continue to grab 1 pound cans of H1000 as they come available? Shooting 300 Win Mag.

1535ct same lot
$old shipped
No it's not factory second.

Recently re-acquired this rifle back after selling to my buddy as a back up for his Gen 1. Likely has less than 3k rounds since I didn’t shoot it a whole lot, and neither did he. 20” MTU Ace barrel threaded 1/2x28 with thread protector, 90° action, will come with a Bix n Andy Tacsport single stage trigger.

Foundation Centurion purchased from a user here. Fits both Rim X and Vudoo as confirmed by Foundation. It is the light fill. Has some silicone residue in the holes in the forend as the previous owner had weights in them. Hawkins M5 DBM with the long latch installed for feeding. Full length aluminum arca rail. 12rd aluminum magazine.

Prefer to sell as package but if I have a buyer for the barreled action and the stock, will part out that way too.

Whole rifle minus optic rings and suppressor: 2400 shipped

Barreled action with magazine and trigger: 1500 shipped

Foundation with bottom metal and arca rail: 950 shipped.


If you are interested in the whole rifle with the K318i, I can cut a deal on that too.

Open to offers.

I started a new SH 100yd challenge thread HERE and was asked about a 50yd rimfire version. Idk what I'm doing but here is the target I was able to make. If you print at 100% scale the final row should print 1" diameter circles and make it a little easier to score.

Rules:

1. All Targets will be shot from a Bipod & Rear Bag

2. Enter as many times as you like

3. Post your target, scored version please.

4. ColdBore means - Your first shot of the day, no exceptions.

5. Target will be shot at 50 yards or 50 meters depending on your range.

6. Lowest score wins

7. Include a Quarter with the image of you absolutely can’t score your own target and someone will likely help you.

8. Bullet just has to break the line to be counted as in the circle

Order of Shots

1. Cold Bore Shot; +1 on first target
•2 Shots touching center dot, 0 points,
•2 shots on target 1 point
•1 shot on target 2 point
•miss the circle with both shots 3 points

2. Zero Target to fine tune your group.
•5 shots at this target IF you need it. NOT PART OF THE FINAL SCORE.

3. 1st Dot Target - Single Shot
•Eliminate white dot 0 points
•Touching Black +1 point
•Miss Black +2 points

4. 2nd Dot Target - Single Shot
•Eliminate white dot 0 points
•Touching Black +1 point
•Miss Black +2 point

5. 3rd Dot Target - Single Shot
•Eliminate white dot 0 points
•Touching Black +1 point
•Miss Black +2 point

6. Three Remaining Targets - 5 Shots EA
•Measure group size, add to score
•Groups outside the circle add 1 point to group average (example, .5MOA group outside the circle = 1.5)
•All bullets just have to break the line to be considered "In"

Copy/Paste data below

Score:
Username:
State:
Rifle:
Caliber:
Ammo:

Lowest score wins!

I got some Berger 153.5 in the other day to try out in my 6.5x284 shehane bench rifle. Figured it would be a good candidate with that BC behind that cartridge. Just did a ladder charge 3 shot groups at 100yds to check my speeds with V555. Seated it .010 off the lans and I was surprised. Next step is to check groups at 300-400yds but has anyone else experienced this bullet to be that forgiving? Didn’t matter what charge I had behind it. It just shot.

I am looking to get an action wrench for a Terminus Zeus QC SA.

Looking for a L3i 457 barrel! Shoot me a message if you’re looking to get rid of one!