Arca rail
Made by Sawtooth Rifles
M-LOK
14.625"
With fasteners

Fits Seekins SP3R forend

Anodized in a dark bronze/fde color

The rail is like new -- It was briefly mounted on a rifle that was barely used

PRICE: SOLD

Free ship in the 48 states

I cannot post photos -- too big -- but I can provide photos to those interested

I prefer PayPal ... Friends & Family ... The one without any fees

Thoughts on the Andres PumIR? Couldn't find much in the way of reviews.

Similar dimensions & weight to a Voodoo S and RH25 while priced about halfway between the two.

American Rifle Company rings
M-Brace rings
34mm tube
X-High -- 36mm height

Like new in the original box -- Even with the ARC brown paper
These rings were mounted very briefly on a rifle that was barely used.
I am selling the scope as well, so I no longer have a need for the rings.

PRICE: SOLD

Free shipping in the 48 states

I am unable to post photos -- they are "too big" -- but I can send photos to those interested

I prefer PayPal ... Friends and Family ... The one without any fees

I've had these for 10+ years, they are still like new. I've always had them in their case, in the console of my truck for checking out things beside the road. They have never been on a hunt or adventure, I have other binos for hunting and hiking.

The only things that shows some wear is soft case, just standard truck dust, the box shows storage wear.

$1225 shipped

Athlon Cronus BTR Gen2 UHD
4.5-29x56
MOA
APLR5 reticle

This scope is like brand new ... In the original box. I bought it brand new in late 2024

It was mounted very briefly on a rifle ... I do not even see any scope ring marks on it.

PRICE: SOLD

Free shipping in the 48 states

*** I am unable to upload any photos -- they are "too big" ... I can provide photos to those interested, but the scope it like new ***

I prefer PayPal ... Friends and Family ... The one without any fees.

MPA Matrix Pro and Weight Kit - Sold as in and includes chassis, weight kit and accessories pictured.

*WILL NOT SEPERATE WEIGHT KIT*

$900 Shipped via Paypal f&f

Chassis and weight kit as pictured. Sold As Is

*WILL NOT SEPERATE WEIGHT KIT*

Rem 700 Short Action - Ambidextrous

Was bedded to an Impact 737 but I removed the lug bedding and it's had a Defiance Ruckus in it for a couple years.

$650 Shipped paypal f&f

Great condition SWFA 6x Milquad reticle. I picked this up as a spare off another member on here and ended up acquiring a 3-9 as well. I don’t have a need for another 6x at the moment so letting this one go. I noticed one small mark on the tube just in front of the parallax (shown in the photo). Glass is clean and rest of the scope is good to go.

Asking $465 shipped. Thanks for looking.

Looking to sell two lightly used LBT Daypacks. These are the V2’s. One in Rhodesian Brushstroke and the other in Vietnam Tiger Stripe. $165 ea shipped conus

Zelle preffered

VTS pack sold.

Admittedly, I’ve been too trusting and naive a few times which has gotten me ripped off on a couple transactions. It’s on me and I own the mistakes. That said, the people ripping me off took my money since I kept up my end of the bargain.

Fool me once, shame on you. Fool me twice-well you just ain’t gonna fool me again! -GWB

Like new in the box Meopta Optika6 5-30x56 FFP, MRAD RD reticle. Was mounted but never shot, still has factory sticker on it. Box, papers, sunshade, and vortex scope caps included.

*$780* shipped & insured. Zelle or Venmo only. Only trade would be a brown Athlon Cronus gen 2 in mil + cash on my end.

Hey Guys, found these things stashed in the back of the vault yesterday, forgot that I even had them! Both are brand new, never mounted, and in perfect condition. $450ea shipped, or both for $850 shipped.

Both are SOLD! Thank you Hide members for being professionals as usual!
John III

Login to view embedded media Login to view embedded media Login to view embedded media Login to view embedded media Login to view embedded media

Excellent condition, purchased a few months ago from Euro.

$900 shipped
Zelle for payment

I have a tikka t3 308 with a 20 moa rail and 3 mags & a 3-15 vortex gen 2 pst arc rings asking 1500 obo for it ill throw in some 7-08 brass that's been necked up to 308 as well. Ill get pics posted later today. Not looking for trades unless it's a 300 norma or 338 norma barreled action.

SOLD

This is my 4th AR-10 ( LR 308 ) build and I am looking to replace the handguard on my last build. In a hurry to complete it I used a Wilson Combat handguard and I am not impressed. I guess you get what you pay for pops into mind. Never the less I need to replace it. The last build I used a SLR SOLO series handguard and it is a superb unit. Not wanting to shuck out another 350 bucks I am looking at the Juggernaut AR-10 handguard and wondered if anyone had any experience with them or know someone who has. I just don't want another hand guard that sounds like a church bell when you release the bolt. I am afraid I will have to step up to the pump and go with the SLR again. The gun I am messing with is a 18 inch 6.5 Creedmoor with a Rainier Arms ultra match barrel. Very accurate so I can't complain there but the handguard is subpar at best.
The Wilson Combat handguard has the 6 screws fastening the structure to the barrel nut. That required a lot of test fitting and shims to time it properly. The end result left a rather large gap between the two rail sections. This is unacceptable and just cheap looking. Not to mention that a annoying ping when you release the bolt. The WC handguard is a complete fail. I wanted to elaborate on the quality of the this product so anyone thinking of buying this piece will not do it. It's garbage all the way around. I use their 1911 parts which are excellent but there rifle parts are just severely lacking in fit and finish. Just stay away from WC all together for your rifle needs.
Back to the OP any help about the Juggernaut handguard would be helpful. I am trying to narrow down the selection one at a time. I am exhausting all my options before I lay down another 350 bucks plus shipping, taxes and bla, bla, bla.
Thank you
Greg

Hey guys, I’ve been looking to get some Area 419 Scope rings and it seems every where I look are out of stock, just wondering if anyone knows a good place to look before I have to hop on the waitlist, Thanks in advance!

I have a used AIAT. I was attempting to change the barrel and it won’t come loose. The AT has the quick change barrel. I loosened the bolt a couple turns. No go. I put in my barrel vise. No go. Any advise?

Thank you.

-Al

SWFA 5-20 with no name 1” rings. Glass is clean. Tracks as it should. Butler caps. The eyepiece cap spring has wore out. Nasty paint job, but it’s effective. Crisp clicks on elevation and windage. This is the illuminated model, but I can’t get it to turn on. A new battery may work I just don’t use the illumination. $700 shipped. Venmo, PayPal F &f or you pay the fees, or check (wont ship until clears)

Legs are perfect, head shows some wear.

$1100 shipped
Zelle for payment

Looking to sell. Zelle preffered but can take usps mo or PayPal ff. If paying with mo, expect delays.

Schmidt and Bender 3-20x50mm PMII. This one is CCW. Locking mtc turrets. Has some scuffs on the turrets and some small marks on the body but glass is clean and functions well. I do not have the rear scope cap but have one of the one hundred concept deals I’ll toss it. Scope comes with an ard.

The mount is not included but I will let it go with at buyers request. It is a 1.5” ARC M brace with 20 moa built in.

$2445 shipped without the mount. If you want the mount add another $270


Would consider trades plus cash for an NX8 2.5-20, XTR Pro, or a Cronus G2 at this time. I haven’t been able to shoot as much as I’d like for awhile and would like to let the S&B go to a good new home.

If anyone has one they are wanting to let go of please DM me. I

Used Agm Tiapan 15-256 Thermal Monocular. Works fantastic, glass is great, no scratches and fully operational. I am only selling this unit because I upgraded to another Agm unit with better resolution. This works great as a entry thermo monocular unit.

Clean MPA one piece mount with diving board. 1.5”/ 34mm rings. Mount has a coat of CLP on it for storage.

225 shipped TYD

These bullets have been out a while. Hopefully some guys here can share the loads the have worked well.

Bolt/Gas
Cartridge
Powder
Charge
Velocity
ES/SD

All of the usual guidelines apply. Every gun is different. Start low, and work up. Et cetera.

Thanks in advance.