For sale is a lightly used Green MDT GRND-POD Bipod with ARCA mount. I don't have the original box.

$SOLD Shipped Paypal F&F

Finally put a 4 round group through the CVA Cascade and got a picture of the group. Why not 5 round?... we all know why lol)
CVA Cascade 6.5 PRC 24" barrel
Leupold Gen.2 VX-5HD 3-15x illuminated firedot
Hornady Brass
Winchester WLR primers
57.1gn Vihtavuori N560
156gn Berger Elite Hunter
BTO=2.263"
2901 fps avg.

Failed to bring the target home before trashing it so all I have is a relative measurement for the group size.

Going into this I know I needed to re-zero because I just put this scope on this particular rifle. Use to have the Mark 4 Hd 4.5-18 on top with illuminated reticle but it felt too busy for hunting and didn't have the low end I wanted

first group(very bottom): center POA, dialed up 6 clicks after, slipped zero with tool less speed set dial
second group(next group up): center POA, dialed down 1, slipped zero again with tool less speed set dial
windage confirmation before adjust shot: aiming top center of larger white diamond, dialed back up one click and slipped zero again. dialed 6 clicks right (double what I thought necessary, I like to "unload" erector system for my final adjustment (read as: make last correction leftward rather than load the system by making last correction rightward)
Windage correction shot: aiming top center o large white diamond, confirmed only need 3 clicks to adjust. adjusted 3 clicks and slipped tool less dial to zero

1 shot left in magazine aiming dead center on top 1" diameter target
load 3 more rounds, fire directly into same 1" target
decide to not take that 5th shot, because... well, you know





The other 3 shot group is from a while back with the same load that did have a direct measurement taken but failed to get a picture of the group...
So far I have roughly 350 rounds through this gun, proper break in and upped my cleaning regiment to follow some of the best competition shooters advice



All in all, wanted to firmly position myself on learning how to reload for your barrel > buying expensive rifles and hoping factory ammo shoots well through it.
I have tons of buddies at work who purchase very expensive custom guns that can't get them to shoot well nearly in 4 times the amount of time put in and twice as much money on factory loads as I spend in "quality budget" class division and tune my loads for the rifle.

When anyone asks me what rifle they should buy I will highly suggest a sub $1000 gun and for them to reload before they go spending big money on the tac drivers. Barrels these days seem pretty few and far between to have major issue with grouping if the fundamentals are there to back it. Can't speak for all budget class rifles, but the CVA Cascade came recommended for dumb accurate at a $650 price point and I don't think that was hog wash at all.

What's your thoughts??

MDT CRUSH IT - Stage Timer

Brand new, purchased for a match that got cancelled a couple days after receiving it.

$SOLD Shipped Paypal F&F

Going through stuff that I didn't remember I had.

I had a Ruger Precision 223 rifle a number of years ago. This is a barrel I purchased off the Hide about the same time. I don't remember the person who did the chambering, but it is a Bartlein 1:7.7 twist, 26" Ruger Precision prefit. Threaded 1/2-28.

It was used when I got it, around 200 rounds according to previous owner. I put another 200 rounds down it. No handloads, just factory ammo. CBC Magtech 77gr clone MK262 loads that shot really really well. Easy half moa shooter with the CBC. I also shot Winchester Supreme Elite 50gr https://www.targetsportsusa.com/win...n-ballistic-silver-tip-ammunition-p-3177.aspx that with the lot I had stacked bullets.
$400 shipped.

Venmo/PP F&F.

Hey guys, listing these items because I only shoot suppressed these days.

Item 1 is the titanium grey anodized Ti 3 port Hellfire muzzle brake and mount for SOLD shipped TYD. On my scale it’s 2.8 oz. lighter than the Hellfire MATCH (weighed against each other in the packaging) which would be good for NRL Hunter and LW hunting rigs.

Ti Hellfire sold to @G.aston4

Item 2 is the black nitrided 4 port Hellfire Match muzzle brake and mount for $150 shipped TYD.

Both kits are .30 cal and 5/8-24 threads.

Anyone know what this folding tripod was used with? ebay description say USMC infrared something.

Well judge AI planned it out and pushed me into it, it's the programmer's fault.

Proof carbon fiber barrel for Origin action. Not even broken in with just 75 rounds of Hornady factory ammo, good as new.

$750 shipped
PP F&F

Daniel Defense Omega 7 M-Lock Rail. Rail is a drop in rail and lived on a departmental carbine for several years. It has dings and dents, but is fully functional and works well.

150 bucks

Paypal/Venmo

Primary Arms RS10R (RMR Footprint) this is primary arms new RS10R with the RMR footprint. Amazing RMR footprint dot that doesn't have the emitter refresh issues of the previous RS10. Includes picatinny mount, rubber cover, MOS plate and screws.

$150 shipped and insured.

I have 271 confirmed transactions on Reddit GAFS username AlternativeStation29. Red dot is crossposted.

No trades.

L3 Insight MTM-PI: 640x480 17um VOx sensor from DRS. Huge 37.5° diagonal FOV, makes for a great scanner. Unit is in excellent condition. Display and sensor are clean, no dead pixels or burn-in. Includes soft pouch, hard to find helmet mount, orange filter, lens tissue, quick reference guide, and cable.

• 1x, 2x, and 4x E-zoom
• Color palettes are WH, BH, and Outline/Edge Detect
• Can take pictures and record videos (can also output video)
• Model: MTM-001-A28 with IR Laser, DOM: 2022
• $3600 $3550 shipped/insured (+500 feedback on Arfcom)

Trades
-ACOG TA02/TA31/TA01
-EXPS3-0, AImpoint T1/T2/P2
-3x magnifiers
-MTM 320
-???

Envy Pro team chassis with NV Bridge and external weights. $ SOLD

Like new
Also has Hawk Hill feet!!!
$280

I have 360 pieces of 4x fired alpha OCD dasher brass

$165 shipped.

Login to view embedded media


At least it was a military aged male this time but I did notice until he’s handcuffed they didn’t get physical .

This is an entire duty shift involved. Guess the good un’s had the century off .

I have a Harris S-LM bipod with the classic stud mounting clamp and a pod loc, attached to my Tikka Tac A1 using a Magpul MLOK stud.

A lot of people recommend to get an adapter such as Really Right Stuff’s, to remove the standard stud mounting plate from the bipod and replace it with an adapter that interfaces directly to Picatinny/MLOK/ARCA. Depending on what your rifle has.

I really wonder what the benefit is? My setup appears solid. I never have to re-tighten the stud mounting bolt, and if I would replace it, I’d lose the benefit of those two leaf springs.

Had my first 2 WTB posts do good here, going for a third.

Anyone have one they are willing to part with?

Good condition. Area 419 34MM tube 1.53”height match scope Mount.

$260 shipped

Brand new

Starline 38 Special Brass​

$14/100​

$65/500​

$125/1000​

everything is shipped OBO price, paypal ff or venmo. shipping UPS, so no po box

7RM, 1x fired, sold as set - 61 cents, $60
81-win
17-RP

300WM, 1x fired, prepped and ready for primer - 70 cents, $80
115 - Hornady

30\06, All federal
77 1x fired, deprimed, tumbled and torch annealed - 45 cents, $35
126 - 1x fired, de primed - 35 cents, $44
278 1x fired, unprocessed 25 cents, $70

308 LRP
50-Hornady 1x fired, $25

350 legend
Hornady, BNIB and sealed - $30

Glock 34 with Zaffiri slide and slide hardware and Faxon barrel. Frame was stippled by Brazen firearms. There are two blemishes on the frame - one on each index point, so the price is really for the slide and barrel. Shoots great

$350 shipped to your FFL
PayPal only

Competition Electronics ProChono DLX

got this and then a xero, never touched this one. has a bluetooth app
BNIB - $120 OBO shipped. paypal ff or venmo, shipping UPS

prices are based off the cheapest i could find lapua and you wont have tax or shipping charges. boxes pictured, not included
everything is shipped price, paypal ff or venmo. shipping UPS, so no po box

308 LRP
1x fired, deprimed and tumbled - 70. 80 cents - $56

6.5 CM SRP, 1x fired, deprimed and tumbled
238 total
100 or 138 lot-1.00 per case
if you buy all 238 - 95 cents per case - $226

The reactions to Jimmy Kimmel’s demise at ABC News are still coming in, and one of America’s most famous conservative actors has perhaps posted the most epic tweet on the situation so far.


As The Gateway Pundit reported, the left-wing Kimmel told his late-night audience on Monday that a MAGA REPUBLICAN murdered Kirk and accused the right of trying to score political points off of it.


“We hit some new lows over the weekend with the MAGA gang desperately trying to characterize this kid who murdered Charlie Kirk as anything other than one of them and doing everything they can to score political points from it,” Kimmel claimed.



Nexstar later announced that all 32 of its ABC broadcast affiliates would preempt “Jimmy Kimmel Live!” indefinitely, blasting Kimmel’s sick comments about Kirk’s murder as “offensive and insensitive.”



Disney also pulled Kimmel’s show.


“Disney is pulling ‘Jimmy Kimmel Live!’ “indefinitely, the company confirmed to Fox News Digital, Fox reported.


Conservative actor James Woods decided to share his thoughts on Thursday on X. At first, it looked like he would shock everybody with his take on Kimmel’s misfortune.




Woods wrote, ” We’ve all made jokes at Jimmy Kimmel’s expense.” But Mr. Kimmel is a fellow artist, and I am heartbroken to see how he has been treated.”


“I believe he is, in his heart of hearts, a good and decent fellow, devoid of malice and hate,” he continued.


Then, Woods performed a sudden heel turn, revealing how he felt about Kimmel getting sacked.


“Just kidding, Jimbo,” he quipped. “Eat sh*t.”

We’ve all made jokes at Jimmy Kimmel’s expense. But Mr. Kimmel is a fellow artist, and I am in fact heartbroken to see the way he has been treated. I believe he is, in his heart of hearts, a good and decent fellow, devoid of malice and hate.
Just kidding, Jimbo. Eat shit.
— James Woods (@RealJamesWoods) September 18, 2025

Click to expand...

Woods’s post had the Internet in stitches, though many of his fans initially thought he had been hacked.

For a second I thought someone hacked your account.
You win the internet!
— I Meme Therefore I Am (@ImMeme0) September 18, 2025

Click to expand...

Mr. Woods… pic.twitter.com/wE0pmkYMtB
— Brick Suit (@Brick_Suit) September 18, 2025

Click to expand...

This got me like pic.twitter.com/2BEel1BOZx
— NO CONTEXT VIDEOS (@Viralvid_89) September 18, 2025

Click to expand...

I was gonna say, James Woods, you’re out of the loop
— PATRIOT IN CHRIST (@MAGA4CHRIST) September 18, 2025

Click to expand...

You almost had me there…
— Tamara Lich (@LichTamara) September 18, 2025

Click to expand...

Oh, you got me good! pic.twitter.com/SFCsGykc9t
— Gummi (@gummibear737) September 18, 2025

Click to expand...

You had me worried for a second James!!
— Chris Yansky (@ChrisYansky) September 18, 202

Click to expand...

SCT Glock 17 clone with Athlon Midas TSR-1

$275 Shipped to your FFL
PayPal only