I hear you are all very polite and nice in here.

Didn’t see this posted

Selling my Gen 3 fat bastard that came off a 6cm
No screws, unless I find them before it ships.
$125 shipped tyd

Great condition. Amazing scope for the money. Includes everything in the pictures. The scope has 2 very small nicks (see pictures).

I am new to Snipers Hide, but I have tons of feed back on other platforms including eBay which I can message you from to prove identity. Buy with confidence!

I accept PayPal, Zelle or Venmo.

$1799 Shipped to the lower 48 insured.

I’ve seen Lyman’s load data listing Hodgdon H335 powder primarily for 123-grain bullets in the 7.62×39mm cartridge. However, I’m sitting on plenty of H335 and have some Hornady 150-grain soft points I’d like to use.

I am thinking of trying 27 grain. But I have set everything up for a large batch run would be good to get any inputs.

Normally, I run 23 grains of CFE BLK with these heavier bullets, but I’m curious if anyone here has experience or data running H335 with a 150-gr bullet? I’m especially interested in real-world results, pressure signs, velocities, or any tips.





Appreciate any insights!

Wife's unexpected surgery means that you get a good deal. I have two one available, and it has been used for 3 benchrest 22lr matches.
It will come as it did from the factory and is in like new condition. $4k shipped and insured.

Also available are the like new mounts with purchase of the scope.

GrayOps 36mm 1.54" height, 20MOA with 90 degree level- SOLD
Hawkins 36mm 1.5" height, 0MOA- $200


Payment via Paypal F&F, Venmo, or Zelle. Tons of all positive feedback here.

Not interested in trades at this time.

I bought this brand new and can’t even recall if I fired it. It looks brand new but for the sake of being unsure I’ll say it’s used. Has an upgraded ambi charging handle but the original is included as well.

These are very well made rifles and extremely reliable. Chosen by the Indian military (if that means anything) several hundred thousand were sold to India.

I was going to use this as a DMR style rifle but never did anything with it.

$1150 shipped

Paypal, Zelle or money order


Thanks!

peak design capture camera clip v3. New, never used. Bought because I was invested in their other plates / tripods.

$45.00 TYD USPS Priority. PayPal friends and family.

New in the box, never opened Really Right Stuff Cinch LR Bino Mount. $40 TYD USPS Priority. PayPal friends and family with no note.

I need your advice guys. The gun is a custom .308 with NF NX8 scope, hawkins rings, manners EH4 stock with élite shell (so there is a carbon fiber shell), defiance action and a 22 bartlein medium profile barrel. It weights around 11 lbs and i kept it reasonably light because I use it for hunting. At the range it shoots amazingly well, from prone and from a bench, with and without bipod. The last three Times i went to the range i was shooting some RWS factory ammo which the rifle shoots regularly in one rugged hole, no joke. Many times when I shoot the third, fourth or fifth round, i can’t literally see the new hole. It’s even difficult to estimate how largenare these groups because you literally don’t see bullet impacts since they are one over the other. BUT, i fired two times in field conditions and the results were bad. The first time i just shot 2 rounds to check zero and they went more than 1 MOA high so today i went at a range in the same mountains where i hunt where you can shoot prone from gravel, thinking it was a good way to try the behaviour of the rifle in a not solid and quite uneven terrain: disaster. Shooting prone, being decently comfortable, i shot around 60 shots and groups opened up from 0.3 to 1.5 moa more or less, with just a single 4 shots group which was 0.4 MOA and a 3 shots group which was 0.5. I tried Leaning bipod legs on a front fixed surface to push them, i tried to load the bipod more and i tried with different rear rests. At the end i noticed that bipod (harris) was digging into the ground resulting in very inconsistent recoil impulse despite my effort to keep the same exact position behind the rifle. Loading the bipod a bit (something i don’t like to do while hunting and which is difficult to do with a harris) helped a bit but groups remained around 1 moa. The spread of the groups was both vertical and lateral, maybe a little bit more vertical but not much so. Then i tried 9 shots in a row from a bench, same identical shooting range and target: 2 fliers and the other 7 shots literally in the same hole, divided into 2 groups which were not in the same exact poi but 1/2 MOA one from the other. The poi didn’t shift much during all the session, remaining centered on my zero overall. The total max spread of all the 60 shots was a little bit more than 2 MOA during all day, considering i switched from prone to bench and including all the “experimental” groups which i did.

1) has this much of an opening of groups to be expected when shooting with the bipod resting on gravel (maybe the worst front test for the bipod) or this change in accuracy has to be due to something else? I am pretty sure that on grass or more consistent dirt results would be better but here in Italy is very difficult to try it. I want to understand if this has to be expected or if this rifle for some reasons is less forgiving in regard to not ideal recoil management due to uneven or yielding terrain
2) a half moa gun, assuming at least that the crosshair doesn’t move on the target, which kind of Max group spread is expected to produce in field conditions, prone and with a bipod resting on gravel or on a similar not consistent surface?
3) I would get better results and less accuracy loss using another bipod (not a harris) with more play in its legs so i can load it and this way the terrain could impact less on the accuracy of the rifle? In this case which are pros and cons of other types of bipods?

I should add that the scope seems not to be the issue (tracks well, never lost zero even despite a solid bang it took the other day), the rifle is reliable and well balanced, all screws are tight to specs and the ammo are of the same lot

Happy 250th Birthday to the strongest Army in the world!!
If you had served in the United States Army, post what years you served in this amazing 250 years!!
I will start us off:
Active Duty-Military Police, 2001-2024

With the supposed planned protests today, what about the whole “we wuz kingz” contingent? Did no one think of those poor oppressed scholars? And what will be the mental gymnastics look like to differentiate them so the liberals can keep them happy?

I’m just so confused and concerned for their feelings.

Anyways, heading to DeadZero, y’all stay sharp.

Selling my Accuracy International ATX Gen 3 rifle. It’s been used but not abused. You can see the wear on the cerakote on the forend and grip area but zero mechanical issues, it’s just used as a rifle should be.

Barrels included are:
20” 6.5 Creedmoor barrel (500rds)
18” 308win (100rds)

Complete setup includes rifle, barrels and the following accessories:

Full length bridge
Full length top rail
Tall action rail
(3) internal weights
Flat trigger shoe
MKM grip (still have original if you want it)
(1) ATX mag

Total package $5250 shipping included to your FFL. No trades please.

Any questions, let me know.

For sale Geissele Super Duty 16" upper with 500rds of slow fire mk262.

It's like this one except it's a MOD 0 without the Hux mount.

$900 $850 shipped

Login to view embedded media
Login to view embedded media
Trades:
Smith & Wesson J frame revolvers 38sp/357mag
Smith & Wesson M&P 2.0 Competition
Smith & Wesson M&P 2.0 Carry Comp metal

300ct Hornady 6.5 140gr HPBT for sale. Got them as part of their refund program for buying dies, but won't be reloading with them at this time.

$90 shipped to you.

500ct Sierra Matchking 140gr HPBT 6.5 for sale. Got them through the rebate promotion after buying my RCBS chargemaster, but not reloading 6.5 at this time.

$175 shipped

Login to view embedded media
Worth watch

Just wanted to see what you all thought of the chamber job on my new bergara

140 rounds of defender 6.5 creedmoor ammunition loading with the sierra soft point bullet. All same lot. Purchased in may. 2732 MV sd of 4.5 ES of 13.5 across 15 rounds in a 24” seekins.

$110

196 Berger 130gr otm 6.5 creedmoor rounds. All same lot. Purchased in April.

$350 shipped conus

Selling an N Vision HaloX 50mm thermal riflescope. Has warranty through 2029. No issues at all. Takes 18650 batteries, has internal recording and the best image in the business. 5250 obo shipped. Only looking to trade + cash on your end for custom rifles, high end scopes. Pm if interested.

I have two picatinny clamp Vortex Razor Red dots on vortex picatinny quick release risers.

3moa dots.

No outdoor use… they’ve been on my home defense weapons and are in perfect condition. They got zeroed at the range then kept inside.

They come with new batteries installed. Just put them in.

Asking $400 shipped for picatinny razor red dot, 3moa dot, with quick release picatinny riser. I think the combo was $500 new, and these are in new condition.

Thanks
Keith

Essentially new, in box with all factory accessories, flip up covers. I mounted it and put in safe, never fired a shot with it on the rifle. Rings torqued to spec. Decided to go with a lighter scope for this hunting build.
$425 shipped

I have a new never used Eagle Industries padded scope and muzzle cover for sale.

$125.00 shipped.

USPS money order or Venmo only

My sig cross weighs in at about 9.5lb and was trying to get it to around 12.5 -13lb which is very comfortable for my other rifles.

Is it possible just to buy a the heaviest 22inch barrel profile I can find to get the weight up?

I already have the weighted PRS grip installed but also realize I would probably need some mlok weights as well to balance the rifle out.

Has anyone tried something like this?