Ahh... there just tools anyway. Like the hammer in my garage, meant to be dropped and kicked around on the ground
Clearly, mags I have work fine in the AXSA's I own with the suspect calibers that are different from 308 (6/6.5 CM). My samples are from 2015 and forward, the mags are not all defective as someone here alluded to (bad batch). If it works in a AXSA and not in a AT-X, well since the actions are the same... you know the answer.
This weekend I'll get out and try these new mags, hopefully they feed properly.
Was Mark posting here too?
Clearly, mags I have work fine in the AXSA's I own with the suspect calibers that are different from 308 (6/6.5 CM). My samples are from 2015 and forward, the mags are not all defective as someone here alluded to (bad batch). If it works in a AXSA and not in a AT-X, well since the actions are the same... you know the answer.
This weekend I'll get out and try these new mags, hopefully they feed properly.
Was Mark posting here too?
To be fair, I was assuming all AI’s were the same as the 20 or so I’ve handled or owned.
Turns out, they all don’t do the same thing. I.E. they have some tolerances.
And Scott even said no one could agree on what/how the mag stopping came about or decided on. Yet another discrepancy.
Also, FWIW, the AX’s I have here don’t have feeding issues with the exact same mags the AT-X has feeding issues with.
Which means, something is different. By design or by tolerances, it’s different.
Which is perfectly fine. But the condescending Mark Larue esque replies don’t help.