Who makes that bag rider? See it has an ADM mount
Have you considered the taller action rail?Any higher scope mount recommendations? Currently running a 1.5" mount and its not quite high enough even with cheek piece bottomed out and all the way right. I have big cheeks.
Looking for a 1.7" or so mount. I know badger makes one but its cantilever and may run into eye relief issues.
It's something we've been working on, they're almost readyWho makes that bag rider? See it has an ADM mount
Did not know that was an option until today. Leaning this route.Have you considered the taller action rail?
Your rifle looks great. What color / coating did you use?I have finally put together a AT-X after shooting an AXSA since 2019, and an AT prior to that.
View attachment 8018423
View attachment 8018422
Factory 24” 6.5cm with TBAC Dominus
7-35 ATACR in Badger C1
21lb-3oz empty
Be prepared for the pot metal screws red loc tited inDid not know that was an option until today. Leaning this route.
Patriot Brown Cerakote by Primal Finish. It was originally one of the blue ones EuroOptic had marked down.Your rifle looks great. What color / coating did you use?
No, theres one less blue one in the world. It’s patriot brown Cerakote.Is that the standard color of the chassis?
+1 please (Maia)It's something we've been working on, they're almost ready
Thoughts? It’s a YouTube short with no explanation or anything to it. Heck the owner might even be a member in here
Comp setup:
Any chance you can get a close up picture of the grip? How do you like it?Comp setup:
Zermatt Origin
TT 2 Stage Diamond
25” 6GT
TBAC Dominus
MKM Precision Grip
MK5 5-25
ARC M Brace
View attachment 8018775View attachment 8018776
I like it. Very modular with the panels and thumb shelves. It’s thinner than an Ergo in the hand and I wasn’t a fan of the texture options hence the goon tape.Any chance you can get a close up picture of the grip? How do you like it?
I think you want it balanced a few inches in front of the mag wellWhats the deal with balancing these rifle/adding weights?
I see a huge variety in setups ups with different scopes, cans, and external weights with not obvious trend. Some of the setups look like they’d be very muzzle heavy compared to others.
It doesn’t seem like there is anyway to add weight to the butt, so are these quite rear heavy as standard?
Or are there some weights guys are adding to the forend and butt that I am not seeing?
You’re forgetting the scopes. The scopes add a rear biased 2-3lbs. Weights on the front allow a shooter to move the CG forward of magwell to their preference.Whats the deal with balancing these rifle/adding weights?
I see a huge variety in setups ups with different scopes, cans, and external weights with not obvious trend. Some of the setups look like they’d be very muzzle heavy compared to others.
It doesn’t seem like there is anyway to add weight to the butt, so are these quite rear heavy as standard?
Or are there some weights guys are adding to the forend and butt that I am not seeing?
What grip is that? I'm not in love with the mdt.Thanks to this thread and @ITR_98_111 I now have one. Have 6GT barrel on the way. Setting it up for PRS and it may just give my impact a run for its money.
I believe so, kind of an upper chassis, lower chassis and a stock assembly.Does the AT-X 700 chassis disassemble the same way the AT-X chassis does? Basically 3 main large pieces?
Scored 2, and an atx FDE long bridge, thanks!Spoke with MH which said they have the ATX Hinges available in stock P/N 29795BL but you will need to call to purchase. Limited available at the moment so call fast.
Just got a new TS Customs 6 dasher barrel for my atx. How do you guys keep the barrels from getting dinged up and scratched when swapping.
I had the factory 6.5cm barrel cut down to 18” for hunting. And its pretty scratched up. I know its a barrel and doesnt really matter but I wanna keep it nice for awhile anyways.
Don’t run a front bridgeJust got a new TS Customs 6 dasher barrel for my atx. How do you guys keep the barrels from getting dinged up and scratched when swapping.
I had the factory 6.5cm barrel cut down to 18” for hunting. And its pretty scratched up. I know its a barrel and doesnt really matter but I wanna keep it nice for awhile anyways.
Don’t run a front bridge
Maybe slide some paper down tbe barrel
Channel
Lmao. I figured this was coming. After all its just a damn barrel.
Lmao. I figured this was coming. After all its just a damn barrel.
Just got a new TS Customs 6 dasher barrel for my atx. How do you guys keep the barrels from getting dinged up and scratched when swapping.
I had the factory 6.5cm barrel cut down to 18” for hunting. And its pretty scratched up. I know its a barrel and doesnt really matter but I wanna keep it nice for awhile anyways.
The ones in the chassis. They're trapped, cant lose em! As long as your 700 action is aics cut, you're good. I haven't tried my aw cut fuzion in it yet to see if it'll handle aw mags.What action bolts are needed for the AT-X AICS, and are there feeding issues for a stock R700 BDL action in 308?
What 700 trigger would be most similar to the AT-X trigger ?
What 700 trigger would be most similar to the AT-X trigger ?
Glad to know that, have an Impact and Bix Tac Sport I'm waiting on from Straight Jacket Armory to throw into my ATX chassis. Should be a solid smaller caliber practice platform, going to be in .223.Probably a bix 2 stage tac sport
I like that answer I have a couple surplus mk13 triggers I had sent in to be lightened.I'd check out the XTSP MOD 22 Trigger. Isn't it the same company that makes the AI Comp trigger? May be similar, but I don't have hands on experience with it so can't actually say.
It isI always wondered if a Tubb two stage trigger would be really similar to an AI trigger. Visually it looks very similar and some AI shooters that I know seem to like them on other guns.