there is a thread on here on how to modify the wiskey 3 to take a trigger hanger. just one strut needs milled down and a screw needs to be shorter.
- Thread starter karagias
- Start date
According to Ted in prior post getting just about any chassis to work with the trigger hanger is not going to be a big modification. Seems like you can go with the chassis of your choice and simply make it work.
I know the Xylo will fit. I reached out to ARC and they stated that the Masterpiece arms chassis should fit too.
Bohem at PVA said that he’s tried the prototype CDG in the xylo and two types of MPA chassis just above.
I have a krg sitting here with an aw mag in it, cant tell for sure without the action if the standard mag latch works or if i need an extended one. I believe i need to dremel down on little raised portion to make a trigger hanger work but ill wait till the action is in hand to see.
That’s your best bet. Put it all away for now and forget about it until you have the action in hand.
Im too eager to do that but I hear you.
Darn it...tried to preorder a 223 or 6.5 barrel from PVA and I guess they are out of stock, guess I won't be getting a free muzzle break.
If ARC is no longer going to manufacture the Archimedes what are the chances ARC might put them on sale to dump some inventory and pay for those new turning centers? Kinda hard to want to pay $1099 for the Archimedes while the Coup is at $899. Im a sucker for a sale, take my money.
If it hasn’t been answered yet ARC told me 28mm rings for my 34mm scope with a total objective end diameter of 58mm. ARC medium.
All of them are already gone, the only ones left are the left handed ones.
Bohem at PVA said that he’s tried the prototype CDG in the xylo and two types of MPA chassis just above.
Likelihood the CDG works with this when they're both available?
Zealot Rifle Chassis by KMW
KMW’s Zealot - LE rifle chassis was shown in the wild for the first time at the 2021 Precision Rifle Expo in Blakely, Georgia this weekend. This chassis design reflects the same philosophies that I embodied in the very successful SENTINEL Combat Stock plus a few more that I could not...
www.snipershide.com Last edited:
Pretty high.
I don't think I originally posted the link I meant to:
Zealot Rifle Chassis by KMW
KMW’s Zealot - LE rifle chassis was shown in the wild for the first time at the 2021 Precision Rifle Expo in Blakely, Georgia this weekend. This chassis design reflects the same philosophies that I embodied in the very successful SENTINEL Combat Stock plus a few more that I could not...
www.snipershide.com 
I talked to the stress reliever this morning. The latest production batch is on the way back today/tomorrow. We'll have more blanks finished with lapping early next week. I updated the inventory for 22, 6, 6.5 and 7mm to reflect what's done in the next 10 days.
If you want to place an order the inventory control allows it now.
free brake with CDG preorder
preorder open until ARC provides finalized print at unknown timeframe
Free jetblast/shockwave muzzle brake if you preorder a barrel before Ted gets him the final tennon print
Ugh I want one of these.I don't think I originally posted the link I meant to:
Zealot Rifle Chassis by KMW
KMW’s Zealot - LE rifle chassis was shown in the wild for the first time at the 2021 Precision Rifle Expo in Blakely, Georgia this weekend. This chassis design reflects the same philosophies that I embodied in the very successful SENTINEL Combat Stock plus a few more that I could not...
What is the hold up on the tenon print? R&D for different angles of the cone?
There's final review work on the design being done to make sure that everything fits, feeds, and functions properly.
It's very close. I saw another draft on Saturday evening that appears to be nearly done. I'm optimistic that I'll see a finalized print in the next day or two.
I'm hoping they decide that there is one angle cone that will work well enough for all cartridges. I think this would make prefits show up on more barrel maker sites.
Yea if it’s different angles for every cartridge gonna get interesting.
What's wrong with just using a set angle? (ex: 25 degree cone)
Still learning GD&T right now
Still learning GD&T right now
Nothing.
Is there a waiting list to be put on? Or a text alert I can sign up for? I would hate to miss the release!
For the action? Its just a pre order on their website. Just click on the action and add options and buy.
Well that was easy enough! Thank you... Now comes the anticipation, which I see is widely shared!!
Internet explorer sure is slow
It may require some fitting to make the AW mags work in the chassis system, though the fact that the CDG was designed to use AW mags might make it easier. In the past, people using the AIAX chassis system have had to modify or change the mag catch to use AW mags. Not sure if that’s changed or even if you’ll have that issue. Just a heads up.
Eh it’s nice to have one that is reasonably well-fitted, results in less bending or off-center angles when running the cleaning rod. The off-center / off-axis part is important to me, after all the stories from barrel makers about people wrecking chambers via cleaning.
We are putting them through with the other production based on the caliber ordered to avoid swapping reamers unnecessarily.
I have all the blanks contoured and muzzle work done, it has been a busy week in the contour lathe. Just waiting on the final print.
Do we have a list of stock/chassis mfgs that'll make a inlet for the CDG? I understand the obvious ARC Xylo will fit. MPA chassis will also fit but I am unsure about mfgs like Manners, Foundation, McMillan, KRG, etc. Ill do what I can to reach out to other companies to see if they'll cut a stock to accommodate the CDG's hanger.
I think the trigger hanger will be a easy fix in just about anything. I'm more concerned with being able to get a spare mag latch for adjustment. I have reached out to magpul and they said they will not sell a replacment so if you botch it your sol
Krg says to use their extended latch in their chassis for aw mags
That it might need slight modification still for best results.
Aero chassis is fairly low-rent and has adjustable mag latch.
Won’t know much else until I get CDG and barrel but I’ll be giving it a try.
Won’t know much else until I get CDG and barrel but I’ll be giving it a try.
I believe manners and McMillan are taking orders for this inlet.
