I picked one up a couple months ago and the battery cover is starting to tear at the seal. Has anyone found a replacement or even 3d printed one up?
SiCo Radius battery cover replacement
- Thread starter 565fitter
- Start date
The OEM cover is not great.
3D printed is not a bad idea. Some ideas are to print the seal area 1-2 thou larger than measured size and sand to fit.
Or 3D print a groove on the insert portion to accept an o-ring.
Don't have my Radius anymore, so spitting ideas off the top of my head that may work.
3D printed is not a bad idea. Some ideas are to print the seal area 1-2 thou larger than measured size and sand to fit.
Or 3D print a groove on the insert portion to accept an o-ring.
Don't have my Radius anymore, so spitting ideas off the top of my head that may work.
The o ring idea was my first thought. The ID of the battery compartment has a groove around it which would make a perfect spot for the o ring
I think this is a great idea if you can get it to work.
Would probably be much better than the OEM cover if you can make it work right.
My battery cover is still in good shape, but I would definitely be interested in one if you are going to do a run of them.
Where did you get that tape wrap at? Mine is just wrapped in Gaffer tape and this looks way better
Similar threads
