• Cold Bore Ritual Contest - Only a Few Hours Left To Enter!

    What’s your cold bore ritual, that one thing you always do before your first shot to set yourself up for success? Winner gets new limited edition Hide merch. Remember, subscribers have a better chance of winning!

    Join contest Subscribe

Maggie’s Funny & awesome pics, vids and memes thread (work safe, no nudity)

20230915_175244.jpg
 
Send me a link for a 5 gallon Wavion can purchased after this madness. I know they make them but not sure which is actually the correct fit.
 
That's the cans I have, I was looking for an aftermarket spout.
 
Bunch of people around me are getting into guns and they have asked me what to get.

Knowing they won't train I have suggested revolvers and as their intent is to carry them I specifically recommend old Smith and Wesson J Models......not the new scandium ones older ones - pre lock made of steel.

My thinking is there is very little immediate action to train into - if it doesn't fire on the first trigger pull, pullit again.

And I say old steel because if they do shoot it will sting their hands less and they are basically unwanted and can be had cheap. The majority were night table guns that get sold by estate agents and where I shop they look brand new. They were also probably built as hand fit smooth guns vs edm cut or mim.
I tell anybody who is "Just now getting into guns" that they should just leave all that to the uniformed (while I pat their hand reassuringly). I don't want untrained idiots, or former lefites who haven't given up their agenda, armed, and trained. They now have the exact environment they voted for, let them live with it.
 
Last edited:
  • Like
Reactions: gigamortis
The lifetime warranty or forever whichever comes first doesn't seem to be anymore.
No, maybe on their highest end tools there is. My dad used to go to garage sales and get tools. Snap on, matco, craftsman, good or broken, then take the busted ones in for warranty replacements. He had a decent set of tools, especially good for a home diy’er.
 
@LeftyJason

I will check the country of Origin on my new wrenches when I get home.
Needed a set of commie end/ratcheting wrenches and got an 11 piece Craftsman set at my local Ace.


For sure not US made and the few times I have used them, they have been excellent.
Im an average dude who does an above average amount of working on my own vehicles and taking care of stuff around the house.
Do have some nice old Craftsman US socket sets, SK tools, and other end wrenches to compare them to.
So far, so good.
And not doing anything crazy
garage journal has a forum with a thread of lists of tool truck brands with the actual companies that make em

Just an FYI

M
 
Why farming used to be a lot more fun…

View attachment 8228118

Sirhr

Back in my days on the farm we cleaned out some pasture for more farm ground. Mesquite trees and hand tools, Grubbing hoe, ax, and shovel. Lot of hard work involved. Later dynamite was employed for some stubborn post holes.

After becoming a welder I had to travel long distances to some leases and bought a GI can to carry extra gasoline. Eventually along came the safety man to inspect my rig to see if I was carrying anything dangerous. The GI can had to go although I pointed out that we had successful fought WW II with them. No go, I still had to go to an EPA safety can. Back then that consisted of a round can that took up more room, a short spout with a spring loaded cover that had to be held open and a screen inside the spout that caused the gas to slowly gurgle out and required a funnel to prevent spilling most of it's contents. As soon as the safety guy checked my new can I took a piece of rod and a hammer and knocked the screen out and cut off a piece of hose so I could siphon gas out of the can instead of spilling a lot of it on me and what I was trying to pour the gas into. Safety guy never caught onto to me bypassing the EPA.

Along with the gas can thing he brought up that oxygen and acetylene bottles had to be separated by 10' so we might have to look at that on my truck. I handed him a tape measure and told him to figure how it could be done and I would do it. Now he was smarter than the average safety person that got their job by not being very good at anything else so was shuffled out the way. In fact we were pretty good friends. He just handed my tape back and that was the end of the conversation. Eventually he became so disgusted with that job that he stepped down and became a roustabout, the lowest job the company had, and he was a good one as he came to our area and I got to watch him in action.
 
Last edited:
  • Like
Reactions: mtrmn and MadDuner
Back in my days on the farm we cleaned out some pasture for more farm ground. Mesquite trees and hand tools, Grubbing hoe, ax, and shovel. Lot of hard work involved. Later dynamite was employed for some stubborn post holes.

After becoming a welder I had to travel long distances to some leases and bought a GI can to carry extra gasoline. Eventually along came the safety man to inspect my rig to see if I was carrying anything dangerous. The GI can had to go although I pointed out that we had successful fought WW II with them. No go, I still had to go to an EPA safety can. Back then that consisted of a round can that took up more room, a short spout with a spring loaded cover that had to be held open and a screen inside the spout that caused the gas to slowly gurgle out and required a funnel to prevent spilling most of it's contents. As soon as the safety guy checked my new can I took a piece of rod and a hammer and knocked the screen out and cut off a piece of hose so I could siphon gas out of the can instead of spilling a lot of it on me and what I was trying to pour the gas into. Safety guy never caught onto to me bypassing the EPA.

Along with the gas can thing he brought up that oxygen and acetylene bottles had to be separated by 10' so we might have to look at that on my truck. I handed him a tape measure and told him to figure how it could be done and I would do it. Now he was smarter than the average safety person that got their job by not being very good at anything else so was shuffled out the way. In fact we were pretty good friends. He just handed my tape back and that was the end of the conversation. Eventually he became so disgusted with that job that he stepped down and became a roustabout, the lowest job the company had, and he was a good one as he came to our area and I got to watch him in action.

I bought one of the “much touted” Rotopax cans for my bike trip. The flat red ones that are hanging like leeches off the sides of tricked out Land Cruisers at mall parking lots across suburbia. Had a long stretch (400km) of no gas and they recommend a can. Though I was pretty confident my almost-11 gallon Dakar tank was up to the distance… hey, can’t hurt. So mounted to the back and put about 1.5 gallons in “just in case” before the long section.

Ok… so go about 200 km and it’s break time. I want to put the gas in the tank so it’s not hanging off the back and being a safety hazard.

WTF.

The nozzle on that thing won’t work. It has locks. It has pop-off parts. It has a non-removeable plastic Screen inside (when you fill it, it shoots gas out on you)… and when I tried to fill, I could not get gas to come out… but it leaked all around the nozzle.

Finally took off the $&#%+ing useless spout. Turned the can on its side and slowly poured into my bike.

What a piece of garbage. $80 plus a $45 mounting kit… for a two gallon reserve… and it doesn’t $&@^%#ing work for crap. It’s Jeep eye candy… Bronco Bait… Tacoma trash for man buns who want to look all rugged. They probably fill them with Bud Light or Kale juice.

Just total poseur garbage to hang off your bugout wanna-be vehicle.

Not that I’ll need it again (maybe in Alaska) but when I get home I am going to punch out the stupid screen… and machine a spout that has a rubber hose on it.

Never… buy a goddamned Rotopax. Now every time I see one, I am going to know poseur. And will be embarrassed to even use mine. Proof that idiots Don’t have to work for the government to screw up a gas can. They can be private sector losers as well!!!

I bet Audi Drivers buy them by the metric ton.

Sirhr