Accuracy International AT-X

[hafejd30]

Man you’re really not getting it. The AT-X turned into the AT-XC which means it’s discontinued, the literature says the AT and AXSA will be too. How much clearer does it need to be spelled out for you?

Unless they release something else or decide not to discontinue one of the models they say they are then yes this will be the only SA model.

The letter states AT and AX308 specifically. MH pulled basically all the AXSA rifles from its site.

I guess what I’m getting at is Eurooptic has other calibers like 6/6.5 available in the AXSA platform

Are those discontinued as well? Or just the 308 model?

I’m not slow I’m simply asking if there’s other options yet or just ATXC and AXSR available

I guess it makes no difference either way however as the ATXC will still be cheaper than the AXSA either way

Accuracy International AXSA Rifles | EuroOptic.com - EuroOptic

Shop Accuracy International AXSA Rifles at EuroOptic.com!

www.eurooptic.com

 

[redneckbmxer24]

The letter states AT and AX308 specifically. MH pulled basically all the AXSA rifles from its site.

I guess what I’m getting at is Eurooptic has other calibers like 6/6.5 available in the AXSA platform

Are those discontinued as well? Or just the 308 model?

I’m not slow I’m simply asking if there’s other options yet or just ATXC and AXSR available

I guess it makes no difference either way however as the ATXC will still be cheaper than the AXSA either way

Accuracy International AXSA Rifles | EuroOptic.com - EuroOptic

Shop Accuracy International AXSA Rifles at EuroOptic.com!

www.eurooptic.com

The AX308 is what they call their short action AX regardless of what barrel comes on it.

 

[hafejd30]

The AX308 is what they call their short action AX regardless of what barrel comes on it.

Oh ok I was thinking this was just a 308 option thing

That really sucks. Kind of takes the average buyer out of the AI world now. Unless you find one in the px. But with $6500 the new low going price the used market will be coming up at well.

The days of $3500 AT’s popping up are likely over. Unless anyone can buy from the mil/LE category at mile high

For $6500 you can have top end custom parts and a ZCO 527 from the px here.

I think they really tossed civilians to the curb on this one

Hopefully they don’t halt operations on parts for the old actions/rifles.

 

[redneckbmxer24]

Oh ok I was thinking this was just a 308 option thing

That really sucks. Kind of takes the average buyer out of the AI world now. Unless you find one in the px. But with $6500 the new low going price the used market will be coming up at well.

The days of $3500 AT’s popping up are likely over. Unless anyone can buy from the mil/LE category at mile high

For $6500 you can have top end custom parts and a ZCO 527 from the px here.

I think they really tossed civilians to the curb on this one

Hopefully they don’t halt operations on parts for the old actions/rifles.

The average buyer isn’t buying AI’s at any price, they’re buying $1000 RPR’s, Bergaras, Tikkas, and Savages. The new chassis design is far better than the AT or AX regardless of what type of long range shooting you’re doing. You’re looking at it as what’s the cheapest AI, what about the fact that these are going to run $2K under what the AX’s currently do? They basically pricing them right in the middle of a bare bones AT and the AXSA.

I’m sure there will still be cheap AT’s and AX’s second hand because they’re pretty undesirable compared to modern chassis designs. Regardless, the second hand market in no way dictates new retail on rifles. Im sure the ATX hurt the sales of AT’s and AX’s too, why would you buy an AT for basically the same money or an AX for more money over the better chassis design with the same action? It would be crazy unless you just want it.

I think AI is doing the right thing moving forward with this model as their sole short action rifle. I just hope that they’ll sell the LE/Mil model to anyone wanting a shorter forend to run 16” barrels and you won’t have to be a LE/Mil entity to buy it like the previous models with the LE designation.

 

[Nik H]

The pricing is normal AI behavior. It raises the low-end bar but is cheaper than the AXSA. However, I wonder how new sales will be with this pricing.

For $6500 you could buy a used AXMC with some extras thrown in. I would be more aligned with owning the AXMC than the ATX-XC for the versatility it provides.

 

[hafejd30]

The average buyer isn’t buying AI’s at any price, they’re buying $1000 RPR’s, Bergaras, Tikkas, and Savages. The new chassis design is far better than the AT or AX regardless of what type of long range shooting you’re doing. You’re looking at it as what’s the cheapest AI, what about the fact that these are going to run $2K under what the AX’s currently do? They basically pricing them right in the middle of a bare bones AT and the AXSA.

I’m sure there will still be cheap AT’s and AX’s second hand because they’re pretty undesirable compared to modern chassis designs. Regardless, the second hand market in no way dictates new retail on rifles. Im sure the ATX hurt the sales of AT’s and AX’s too, why would you buy an AT for basically the same money or an AX for more money over the better chassis design with the same action? It would be crazy unless you just want it.

I think AI is doing the right thing moving forward with this model as their sole short action rifle. I just hope that they’ll sell the LE/Mil model to anyone wanting a shorter forend to run 16” barrels and you won’t have to be a LE/Mil entity to buy it like the previous models with the LE designation.

If they come out with different forends like mlok and lengths and 223 and magnum bolts for this platform it be excellent

 

[Nik H]

If they come out with different forends like mlok and lengths and 223 and magnum bolts for this platform it be excellent

A magnum bolt face SA bolt would really be a huge add to the rifles capability

 

[redneckbmxer24]

The pricing is normal AI behavior. It raises the low-end bar but is cheaper than the AXSA. However, I wonder how new sales will be with this pricing.

For $6500 you could buy a used AXMC with some extras thrown in. I would be more aligned with owning the AXMC than the ATX-XC for the versatility it provides.

I haven’t seen used AXMC’s for $6500 for a long time and it’s rare to even see one pop up for sale.

Personally though I wouldn’t own an out of production AI for parts support alone, it’s hard enough to get parts for current models.

If they come out with different forends like mlok and lengths and 223 and magnum bolts for this platform it be excellent

I don’t see what peoples fascination is with MLOK. They would also have to increase the dimensions of the forend or reduce the material and strength of it to keep the same dimensions in order to have clearance for the MLOK nuts and be able to remove and I stall barrels or clear truck axle contours and people would bitch about that. The keyslot works and there is nothing wrong with it other than people have it in their heads that they need MLOK because it’s the current hot thing. What do you need to attach to a AI rifle forend that you can attach with the keyslot or picatinny on the keyslot? Because I’ve never found anything I couldn’t attach to any of mine or anything that gave me trouble attaching.

I wouldn’t hold your breath for AI to produce 223 or magnum stuff. If you want it bad enough though there are options. I’m sure it won’t be long until the people doing 223 and short mag conversions for previous SA models are doing them for these.

 

[Nik H]

I haven’t seen used AXMC’s for $6500 for a long time and it’s rare to even see one pop up for sale.

Personally though I wouldn’t own an out of production AI for parts support alone, it’s hard enough to get parts for current models.

Do you think they would bring a lower price? I haven't seen one for sale in a while unlike the ATs

 

[hafejd30]

I don’t see what peoples fascination is with MLOK. They would also have to increase the dimensions of the forend or reduce the material and strength of it to keep the same dimensions in order to have clearance for the MLOK nuts and be able to remove and I stall barrels or clear truck axle contours and people would bitch about that. The keyslot works and there is nothing wrong with it other than people have it in their heads that they need MLOK because it’s the current hot thing. What do you need to attach to a AI rifle forend that you can attach with the keyslot or picatinny on the keyslot? Because I’ve never found anything I couldn’t attach to any of mine or anything that gave me trouble attaching.

I agree and posted the same thing yesterday. But it’s an option some people want and could be a selling point on the new platform.

 

[redneckbmxer24]

Do you think they would bring a lower price? I haven't seen one for sale in a while unlike the ATs

The AXSR’s have been out for a while now which is their replacement, I think if people were going to dump AXMC’s and used value drop it would have happened by now. For the most part I think people just don’t part with them and there’s not as many in the wild as the SA rifles. The fact the AXSR’s are like 10-11K probably helps keep their value up too.

Gen 1 AX’s and AW’s got dumped cheap when the quick lock rifles released in 2014, then the LFP quick locks went for cheap when SFP stuff came available even though you could buy a conversion bolt (if you could find one). Now recently AXSA’s have been selling for as low as $3500 since the ATX’s released. The AXMC’s never really saw the trend and I doubt it will happen.

 

[olive drab]

Where are you seeing axsa with a barrel for 3500? I cant recall under 5k

 

[redneckbmxer24]

There's been quite a few sold in that price range on the classifieds.

 

[Doctorwho1138]

I have an AXMC and I wouldn’t sell it for anything that is currently available for the money. But I am also too invested in it. . But I have seen a few for sale in the 6500 to 7500 range. Great bargain if you can find one in that range. I think AI is making the right call here and streaming their lineup.

 

[hafejd30]

Wouldn’t mind picking a AXSA up for $3500. I’ll have to keep an eye out. Only ones I recall seeing that low are the pre 14 non quick loc with the older AT style stock

 

[olive drab]

Wouldn’t mind picking a AXSA up for $3500. I’ll have to keep an eye out. Only ones I recall seeing that low are the pre 14 non quick loc with the older AT style stock

same here

 

[Darkside-Six]

I’m in the market for another AI within the next few months. I had a decked out Gen 1 ATX that I let go 2 years ago. Had always intended on grabbing another or actually 2. Now with this news I’m debating on holding off and grabbing one to see, but on the other hand, as many have mentioned I could grab another ATX and kit it out pretty nice like I use to have for the same money or less. My only concern is how much will those older ATX still be supported by AI. I’ve already been on the lookout for ancillary add ons like the high action rail and other parts that have seemed to be out of stock for months with no idea when shit is coming back.

The folding stock feature is nice but let’s face it, a $250 hinge doesn’t justify a $2200-2400 price increase. Maybe if it was the better AXSR style stocks like they promised 2 years ago it might be more justifiable. Also, the ATX pre orders we were told late spring (May iirc) and the first batches didn’t start dropping until September. I have a few months to wait while my shoulder heals from surgery but I’m not gonna be waiting all summer.

 

[hafejd30]

I’m in the market for another AI within the next few months. I had a decked out Gen 1 ATX that I let go 2 years ago. Had always intended on grabbing another or actually 2. Now with this news I’m debating on holding off and grabbing one to see, but on the other hand, as many have mentioned I could grab another ATX and kit it out pretty nice like I use to have for the same money or less. My only concern is how much will those older ATX still be supported by AI. I’ve already been on the lookout for ancillary add ons like the high action rail and other parts that have seemed to be out of stock for months with no idea when shit is coming back.

The folding stock feature is nice but let’s face it, a $250 hinge doesn’t justify a $2200-2400 price increase. Maybe if it was the better AXSR style stocks like they promised 2 years ago it might be more justifiable. Also, the ATX pre orders we were told late spring (May iirc) and the first batches didn’t start dropping until September. I have a few months to wait while my shoulder heals from surgery but I’m not gonna be waiting all summer.

According to shot show guys the plan is to keep producing parts for the current AW/AT rifles out there. They’ll be available to LE as rifles yet

The ATX is the same action as the AT and AX to my knowledge. Same scope rail/bolt etc

 

[96C]

People are getting wound up about the long rail and folder hinge while the redesigned action (slimmer, lighter, increased number of bolts, gas pressure blast discs, different bolt lift allegedly etc.) is where the juice is. The 'standard model' AT-XC will be a good option for most shooters.

There is nothing wrong with buying one of those and adding your own muzzle brake, weights and bag rider based off personal preference down the track as required.

Fortunately I own an AXSR and a Gen1 AT-X, with my preference absolutely going to the AXSR in terms of feel, function and small detail refinements. If AI can merge these two rifles together, well that's excellent.



The AT has been around for a long time on the back of the AE and AW while the AX has been around since before 2014. LE versions pumped some more air into their tyres... But surely at some point a company has to move on and cut away older designs. Parts and serviceability of course needs to be managed with thousands of these rifles in circulation however continuing to make these rifles while they're not multiple generations ahead doesn't make a lot of sense unless the market is absolutely frothing over stock.

 

[Darkside-Six]

According to shot show guys the plan is to keep producing parts for the current AW/AT rifles out there. They’ll be available to LE as rifles yet

The ATX is the same action as the AT and AX to my knowledge. Same scope rail/bolt etc

They are technically all the same but the there was a specific High action rail made for the ATX to make sure it aligned with the longer picatinny rail on the fore ends. The AX rail and the original high rail for the AT would not align correctly. So the high action rail for the ATX has been out of stock at both EO & MH for several months now. Maybe they are just waiting to restock until after the new year/new models come out. But the availability of parts being in stock as been pretty scares since launch.

 

[BurtG]

But it doesn’t sit right that they take only that rifle to shot without a firing pin in it. For some reason that bothers me and makes me think the “improved” action isn’t anything to brag about

Exactly



I think these cheap atx that are around now won’t be cheap long. Just like the ATs got cheap then price went up again

 

[anon]

I am glad to have gotten the discounted, archaic, pre-bulimic, AT-X. It will do just fine for my use.

I would like one of the new short versions, 16.5" 308 win, why not?

 

[blbennett1288]

The heavy bolt lift union is probably going to file a grievance against me for this…but my discontinued and heavy bolt lift ATX got another first place finish @Steelcityprecision Rifleman’s Challenge.

 

[JB.IC]

The heavy bolt lift union is probably going to file a grievance against me for this…but my discontinued and heavy bolt lift ATX got another first place finish @Steelcityprecision Rifleman’s Challenge.

View attachment 8334794

Congrats. I used to see guys brag about winning matches with a Savage rifle. When that happened people would say it didn’t matter what rifle the shooter used because they would have won anyways. So, did you win the match or did the rifle win the match?

 

[blbennett1288]

Congrats. I used to see guys brag about winning matches with a Savage rifle. When that happened people would say it didn’t matter what rifle the shooter used because they would have won anyways. So, did you win the match or did the rifle win the match?

My statements are more tounge and cheek and playful than serious. It’s kinda a running joke that no one can win a match with an AI due to the heavy bolt lift, throw on top of that the new AT-XC and the ATX being discontinued and it’s even funnier.

I truly believe it’s the Indian, not the arrow. Having said that, I would not have won the match if I was running another rifle because I do not have familiarity with another rifle / system. I have been only running AI’s for at least 5years and the same rifle for at least two (Gen 1 ATX). Fear the man with one gun mentality.

Additionally, I no longer shoot PRS. I shoot field and team matches that require you to know your gear and be proficient in using that gear in the elements, with time restrictions, and sometimes under duress. Most of the field and team matches are blind stages and all are find / range / engage on the clock.

 

[JB.IC]

My statements are more tounge and cheek and playful than serious. It’s kinda a running joke that no one can win a match with an AI due to the heavy bolt lift, throw on top of that the new AT-XC and the ATX being discontinued and it’s even funnier.

I truly believe it’s the Indian, not the arrow. Having said that, I would have not won the match if I was running another rifle because I do not have familiarity with another rifle / system. I have been only running AI’s for at least 5years and the same rifle for at least two (Gen 1 ATX). Fear the man with one gun mentality.

Definitely. As much as I complain about the bolt lift, it was less noticeable after a few months of use. Then I switched to another rifle and felt like I was going to rip the bolt off lol.

As much as we hate to hear people complaining, it does lead to innovation. Garmin, for instance, was listening.

 

[Stag556]

The heavy bolt lift union is probably going to file a grievance against me for this…but my discontinued and heavy bolt lift ATX got another first place finish @Steelcityprecision Rifleman’s Challenge.

View attachment 8334794

This you after that match???

 

[PlinkIt]

Only thing I'm really aggravated about it the comment that all the future bolt face options will only come for the new action design

So they talked up magnum bolts to everyone buying the atx and then basically said fuck yall buy another 6500 rifle if you ever want that option even though we have been saying it was coming for years now

 

[SFree]

My statements are more tounge and cheek and playful than serious. It’s kinda a running joke that no one can win a match with an AI due to the heavy bolt lift, throw on top of that the new AT-XC and the ATX being discontinued and it’s even funnier.

I truly believe it’s the Indian, not the arrow. Having said that, I would not have won the match if I was running another rifle because I do not have familiarity with another rifle / system. I have been only running AI’s for at least 5years and the same rifle for at least two (Gen 1 ATX). Fear the man with one gun mentality.

Additionally, I no longer shoot PRS. I shoot field and team matches that require you to know your gear and be proficient in using that gear in the elements, with time restrictions, and sometimes under duress. Most of the field and team matches are blind stages and all are find / range / engage on the clock.

Mr. Bennett,
Flatulence , nothing more than verbal flatulence. Your weak and pathetic posturing are signs of an incontinent, unconfident braggart. CEASE AND DESIST! This is your last public warning

Bolt Lift United
Dewey, Cheatem and Howe
Law Firm

 

[Woodland_Wolf_M81]

Not sure if this is old news, but I saw that Mile High has the "new" AT-X optimized magazine listed. This also qualifies for the small ground hog day discount that they are running today. I picked up 2 for $107.94 each.

Accuracy International: AT-X Optimized Magazine (10 Round)

Accuracy Internationals Optimized AT-X Magazine with an improved feed ramp and follower.

www.milehighshooting.com

 

[The Durk]

I got to join the cool kids yesterday.

 

[Fred @ Bison Tactical]

Not sure if this is old news, but I saw that Mile High has the "new" AT-X optimized magazine listed. This also qualifies for the small ground hog day discount that they are running today. I picked up 2 for $107.94 each.

Accuracy International: AT-X Optimized Magazine (10 Round)

Accuracy Internationals Optimized AT-X Magazine with an improved feed ramp and follower.

www.milehighshooting.com

I wonder if its forwards compatible with the AT-XC with its new bolt and action features? I also have been using the standard AX magazines, anyone know what problems this one is supposed to address for the AT-X over using the AX magazines?

 

[JB.IC]

I wonder if its forwards compatible with the AT-XC with its new bolt and action features? I also have been using the standard AX magazines, anyone know what problems this one is supposed to address for the AT-X over using the AX magazines?

I’m not exactly sure, but both magazines I have for my ATX had issues with feeding 6.5CM and occasionally rounds would pop out of the magazine when inserting it. I sent both to AI and they adjusted the lips and I think they replaced both inserts as well because one of my magazines (the heavily used one) came back with a new insert. The other magazine’s insert, I couldn’t tell if it replaced because it was a new magazine.
I suspect that’s part of the optimization.

 

[CageFighter]

Looks like they made some machining cuts to either side of the action to lighten the action.
View attachment 8330047

how do we fill this giant weight reduction hole in the receiver/rail? im not a fan of it and prefer the Gen3 action look.

 

[carbonbased]

View attachment 8342512
how do we fill this giant weight reduction hole in the receiver/rail? im not a fan of it and prefer the Gen3 action look.

Just MIG some metal in there.

 

[Stag556]

View attachment 8342512
how do we fill this giant weight reduction hole in the receiver/rail? im not a fan of it and prefer the Gen3 action look.

You just buy a Gen 3 and shoot the hell out of it

 

[RUN8]

I’m about to step out the door and do exactly that while the weather is still nice and the range isn’t a mud hole.

 

[Homelander]

Did some testing with the short stick over the weekend finally, 18.5" 260 Rem. Some inconsistencies on my part but they are zippy!

 

[beetroot]

They are clearing out old models for the new interchangeable bolt face AT-X2.

Bumping my own comment as I pretty much nailed it.

 

[beetroot]

That's the unit I want I just need to find someone who ships here. The paracord was just to get me out of the house with a sling haha.

It's been covered to death but I would describe the bolt lift as stiff with the detent positions being quite noticeable. My AE is noticeably smoother after well over 100,000 cycles so I am sure it will break in.

I'm sure everyone knows what they look like at this point but here is mine. Waiting on a handguard wrap, stock hinge, Deluxe Ergo Grip, sling swivels, and magazines.

I thought the silver/gold Heathen 2 looked kind of gaudy. It looks like a deadbolt latch. Hopefully it works well.

Does the cut in the AE forward of the mag well make much difference in how the rifle sits on a barricade?
I‘d thought about the ability to do this on the AE/AW and how it would easily “modernise” the chassis.

 

[Rodney65]

Does the cut in the AE forward of the mag well make much difference in how the rifle sits on a barricade?
I‘d thought about the ability to do this on the AE/AW and how it would easily “modernise” the chassis.

Yes without a bag, or sometimes with the sling thrown under it, it made a great impromptu barricade press that allowed it to sit flat. I really liked it for big fence posts and my Hog Saddle as you can see in the picture.

Not my original idea though. Someone, possibly on the hide a decade ago, made a little tutorial on cutting a barricade press slot like that in Viper Skins and that inspired me. It isn't solid plastic so it was pretty easy.

 

[RUN8]

Has anybody ever had issues with Federal 6.5 Creedmoor ammo in their AI or other rifles? Hit the range yesterday and fired 3 rounds of 130gr Terminal Ascent, which is loaded in small rifle primer brass, all the primers looked like shit and one of them backed out a smidge. When I got home and cleaned the rifle I discovered a bit of carbon on the firing pin, so I guess the one that backed out must have released some gas.

Everything else functioned just fine, although a few of the Hornady 140gr ELD-M seemed like they might have had slightly harder bolt lift than the others. No issues at all with any primers in the large rifle primer brass.

This particular barrel continues to display an affinity for Hornady ELD-M’s.

 

[hafejd30]

Has anybody ever had issues with Federal 6.5 Creedmoor ammo in their AI or other rifles? Hit the range yesterday and fired 3 rounds of 130gr Terminal Ascent, which is loaded in small rifle primer brass, all the primers looked like shit and one of them backed out a smidge. When I got home and cleaned the rifle I discovered a bit of carbon on the firing pin, so I guess the one that backed out must have released some gas.

Everything else functioned just fine, although a few of the Hornady 140gr ELD-M seemed like they might have had slightly harder bolt lift than the others. No issues at all with any primers in the large rifle primer brass.

This particular barrel continues to display an affinity for Hornady ELD-M’s.

View attachment 8343618

When you say looked like shit are you talking cratering? I see you have SFP bolt already. We ran CCI 450 in my buddies rifle. They have a harder cup on them and didn’t crater once the firing pin hole was bushed

Have you checked the headspace?

 

[RUN8]

Yes cratering.

I don’t have a headspace gauge, but fired brass was .005” longer than unfired measured with the SAC comparator on a Lyman dial caliper.

 

[ma smith]

Complain to Federal, its bad ammo design to be using SRPs .308 boltface hunting cartridge.

 

[RUN8]

Federal won’t give a shit most likely.

A bit more comparing it looks like the Federal brass is about .001” shorter on some pieces than Hornady. My Fired Hornady cases expanded only .004”. Same story for the Berger I shot in Lapua brass.

As a precaution I pulled the barrel, removed the top bridge to expose the front of the receiver and threads. I then thoroughly scrubbed the barrel shoulder, barrel tenon threads, receiver face, and the threaded portion of the receiver that accepts the barrel. I had recently had the barrel off to install the top bridge (which I just now discovered is not necessary) so there’s a possibility that some bit of debris was interfering with those mating surfaces. I then reinstalled everything and used a wrench to ever so slightly snug up the barrel into the receiver so headspace is biased towards being more minimum than maximum.

I will now torque the barrel lock nut to 55in-lbs, and reinstall the top bridge and torque those fasteners to spec.

 

[hafejd30]

Federal won’t give a shit most likely.

A bit more comparing it looks like the Federal brass is about .001” shorter on some pieces than Hornady. My Fired Hornady cases expanded only .004”. Same story for the Berger I shot in Lapua brass.

As a precaution I pulled the barrel, removed the top bridge to expose the front of the receiver and threads. I then thoroughly scrubbed the barrel shoulder, barrel tenon threads, receiver face, and the threaded portion of the receiver that accepts the barrel. I had recently had the barrel off to install the top bridge (which I just now discovered is not necessary) so there’s a possibility that some bit of debris was interfering with those mating surfaces. I then reinstalled everything and used a wrench to ever so slightly snug up the barrel into the receiver so headspace is biased towards being more minimum than maximum.

I will now torque the barrel lock nut to 55in-lbs, and reinstall the top bridge and torque those fasteners to spec.

I’m sure it’s not your issue but if you just cleaned it make sure you don’t have residual oil in the chamber.

 

[RUN8]

Roger that. I gave it a good internal wipe down with a paper towel jammed in there.

 

[hafejd30]

Roger that. I gave it a good internal wipe down with a paper towel jammed in there.

Also federal is soft brass. Hornady isn’t a ton better. So factory ammo loaded hot or close to the lands could have some effect.

Also remember you’re part of the #12lbsboltliftgang with that ATX. So maybe the hornady is just fine

 

[RUN8]

This rifle loves Hornady ammo for some reason. Berger factory ammo is OK, everything is sub minute, but this particular Bartlein LOVES ELD-M’s.

The Federal stuff shot reasonably well for hunting ammo just seems like it might be loaded on the spicy side. Which probably means it should be running large rifle primers. That said I torched of 3 rounds of 129gr Hornady SST “Superformance” and it shot better than the fancy pants Federal stuff, and showed no signs of pressure or primer issues.

I guess I should be happy it likes the cheapest readily available component match bullets and loaded match ammo out there. Like a pretty girl that would rather drink Coors Banquet than Champagne.