Accuracy International Picture Thread

#18,251
9048395D-2A8A-4DE1-82FD-414CF7DB2235.jpeg

Kept the ZCO and sold the ATACR.
 
  • Like
Reactions: CollarChoke, MysizeisMAGNUM, JonKleman and 7 others
#18,253
vh20 said:
Yes. I bought a new SFP 308 bolt body for one of my AXMCs. It was defective (actually skipped an entire step in the machining process). It was the ONLY one in stock ANYWHERE at the time. I had to send it to AINA. They inspected and called me and said, yep - we'll replace it. I asked how long that might take since no one had them in stock anywhere. They said, don't worry - we keep plenty of stock of parts like this on-hand for repairing customer's rifles. It will ship out today.

So, even if you can't find an extra part in stock anywhere, there is an excellent likelihood that AI has it on hand if a rifle needs it for a repair.
Click to expand...

I had a very different experience from you.

I called AI to ask about replacing a damaged bolt head on a rifle I purchased. They told me they don't swap heads (even though I found a post on here where a rep stated they do), and instead offered to sell me a whole new bolt body for $800 and change (which they had in stock). Not what I wanted to hear, but figured I'd take them up on the offer. When I called back to purchase, the guy I got on the phone acted like I was an idiot and told me they don't sell parts, despite giving me a price for it maybe two days earlier.

Fortunately for me, a kind member here offered to swap his better condition bolt head for mine, so my ugly gas cut bolt has been united with the 7 axis dremel body.

And for anyone curious, swapping bolt heads is like a ten minute process, so I have no idea why they don't do it for people.

20240317_124729.jpg
 
Last edited:
  • Like
  • Love
  • Sad
Reactions: The Durk, JonKleman, Bravo6niner and 7 others
#18,254
WillHugh said:
I had a very different experience from you.

I Called AI to ask about replacing a damaged bolt head on a rifle I purchased. They told me they don't swap heads (even though I found a post on here where a rep stated they do), and instead offered to sell me a whole new bolt body for $800 and change (which they had in stock). Not what I wanted to hear, but figured I'd take them up on the offer. When I called back to purchase, the guy I got on the phone acted like I was an idiot and told me they don't sell parts, despite giving me a specific price for it maybe two days earlier.

Fortunately for me, a kind member here offered to swap his better condition bolt head for mine, so my ugly gas cut bolt has been united with the 7 axis dremel body.

And for anyone curious, swapping bolt heads is like a ten minute process, so I have no idea why they don't do it for people.

View attachment 8390528
Click to expand...
Did you send your bolt in to them for repair?
 
#18,258
M8541Reaper said:
Anyone here know of anyone who makes a rubber pad that covers the AXSR 308 mag’s baseplate? To keep it from cracking when reloading over rocks/concrete? I coulda sworn I seen a post with some sort of rubber baseplate thing on some mags a year or two ago.
Click to expand...

I printed some out of TPU on FDM printer, they work but the print quality of TPU is not great, not good enough to make a product out of it IMO, and I'm too lazy to do a full clean up and powder swap of the SLS printer.

1712467538600.png

1712467560200.png
 
  • Like
Reactions: M8541Reaper, TylerN and Part Timer
#18,259
WillHugh said:
No, they just told me to purchase a whole new bolt body, and made sure to tell me I'd void my warranty if I did any work on it myself. I obviously disregarded.
Click to expand...
That's odd. How was the bolt head damaged? It's kinda weird they told you to just replace it without them even seeing it. It is understandable that they wouldn't warranty any work not done by them, though.
 
#18,260
M8541Reaper said:
Anyone here know of anyone who makes a rubber pad that covers the AXSR 308 mag’s baseplate? To keep it from cracking when reloading over rocks/concrete? I coulda sworn I seen a post with some sort of rubber baseplate thing on some mags a year or two ago.
Click to expand...
If ya don't find what you seek my dude, let me know, we've got a nice Markforged printer at work I could commandeer for a 'special assignment' (thanks @derek1ee for the idea).
 
  • Like
Reactions: M8541Reaper
#18,264
I got to mess around a bit and set the mag catch height on the GrayOps A-dub. Easy enough to do. Definitely looks like a mag extension when you're used to a regular smooth AW barely poking out. Fit and finish is super nice. I was going to spray it to match my dasher barrel but it looks good and it's already a tight fit in the magwell.

image_16902657.JPG


There's a neat little ridge in the mag and follower at the cartridge shoulder, and using the patented finger test, looks like it may help minimize nosedives. I almost want to screw on the dasher barrel just to play with it a bit.
image_67198721.JPG
 
  • Like
Reactions: TylerN, JonKleman, Part Timer and 2 others
#18,270
  • Like
Reactions: taliv
#18,271
ELCO82 said:
Europtic has some axsr left hand bolt bodies in stock. FYI.

www.eurooptic.com

Accuracy International AXSR .338 Lapua Mag LH Bolt Assembly 29357 For Sale | SHIPS FREE - EuroOptic

FREE SHIPPING on Accuracy International AXSR .338 Lapua Mag LH Bolt Assembly 29357
www.eurooptic.com www.eurooptic.com

www.eurooptic.com

Accuracy International AXSR .300 Win Mag LH Bolt Assembly 29368

FREE SHIPPING on Accuracy International AXSR .300 Win Mag LH Bolt Assembly 29368
www.eurooptic.com www.eurooptic.com
Click to expand...
Paging the left handed man himself @Nik H
 
  • Like
Reactions: Tack425
#18,273
hafejd30 said:
Pretty sure he’s purchased every LH bolt for the AXSR….

Only missing the AXSR
Click to expand...

I was just about to say this lol my man is about to barter his way into a fully kitted out lh axmc or will be funding his retirement selling off lh bolts n crap lol
 
  • Like
  • Haha
Reactions: Tack425, DKN83, Nik H and 1 other person
#18,278
Nik H said:
Its called applying lessons learned or buying insurance. I know I will buy the rifle soon so I bought not only every bolt body but also a spare firing pin shroud assembly
Click to expand...
If my AI ever fails when I need it, my assurance is knowing I can use the damn thing as a club and still go out gangster
 
  • Like
  • Haha
Reactions: Huskydriver, TheOfficeT-Rex, Nik H and 1 other person
#18,279
TheBigCountry said:
If my AI ever fails when I need it, my assurance is knowing I can use the damn thing as a club and still go out gangster
Click to expand...
“I wanna go out of this world the same way I came into it — screaming my head off and covered in someone else’s blood.”

-Stan
 
  • Haha
Reactions: DKN83 and TheBigCountry
#18,283
CollarChoke said:
Did some additional stress testing of pfl338's AXSR/AXMC AICS mag collar design today, ran 100 rounds with 5 round string pairs at speed (i.e. as quickly as I could run the bolt and reacquire the target) out of a polymer MDT 308 mag in the AXSR. Not just from bench seated, but also off of a bag with weight into the front of the magazine. Ran flawless without any issues. I now have 3 MDT polymer mags with these collars on them and they will be my primary short action magazines for the AXSR.

View attachment 8391359
Click to expand...
It’s a nice looking range but my tinnitus acts up just looking at it sheesh
 
  • Like
Reactions: carbonbased, BurtG and CollarChoke
#18,285
CollarChoke said:
Did some additional stress testing of pfl338's AXSR/AXMC AICS mag collar design today, ran 100 rounds with 5 round string pairs at speed (i.e. as quickly as I could run the bolt and reacquire the target) out of a polymer MDT 308 mag in the AXSR. Not just from bench seated, but also off of a bag with weight into the front of the magazine. Ran flawless without any issues. I now have 3 MDT polymer mags with these collars on them and they will be my primary short action magazines for the AXSR.

View attachment 8391359
Click to expand...

Need someone to make a 300 prc specific mag next
 
#18,286
bigfoot750 said:
Isn’t 3 better than 1?View attachment 8390215
Click to expand...
Hey man it looks like you have 5.56, 308, and a magnum bolt heads here. Are these short action bolts or ASR? I’d like to run mangum (saum or PRC) and 556 in my ATX but I’m not aware of that being possible. Let me know if I’m wrong.
 

Attachments

  • IMG_6386.jpeg
    IMG_6386.jpeg
    686.4 KB · Views: 129
  • Like
Reactions: TylerN
#18,290
VSP968 said:
How to vandalize your AT rifle with AE Mk 2 skins:

Strip AT rifle, remove all flush cups because we don’t need no stinkin’ flush cups, mark cuts for skins with tape.

View attachment 8352844

View attachment 8352831

Cut skins as necessary with razor saw

View attachment 8352832

View attachment 8352833

Test fit

View attachment 8352834

View attachment 8352835

View attachment 8352836

Hey! One of the skin screws won’t pass through the chassis fore end! Use a 1/8” transfer punch to mark it.

View attachment 8352837

And drill a 15/64 hole because that’s what all the other holes in the chassis are.

View attachment 8352838

To be continue
Click to expand...

VSP968 said:
AT rifle vandalism, continued.

I’ve got a drill press in the garage but it’s crowded out there what with the nice car that’s never seen rain or salt on the trickle charger and all, and I think I’m out of propane for the heater anyhow.

View attachment 8353737

Anyway, it’s more fun to drive 10 minutes to your buddy’s machine shop and watch him drill holes in your chassis on his Bridgeport.

He’s not a gun guy at all but he’s knocked out by the interrupted threads in the receiver for the barrel.

View attachment 8353743

View attachment 8353869

I go home and assemble my shit. Everything is going swimmingly until I function check the rifle.

The trigger is stuck solid and won’t budge. Upon further investigation, I discover the mount for the trigger shoe is hanging up on the skins at the top of the skin’s trigger opening.

View attachment 8353746
The triangle shaped piece at the top rear of the trigger opening has to go. Razor saw:

View attachment 8353756

It worked!

View attachment 8353751

I had him counter bore the “stupid idea” early fore end for the counter sunk screw mounting of the late fore end. Maybe this summer I’ll debond the fore end and switch over to the early front sling swivel style.

Probably about the same time I pop off these skins and DuraCoat them OD green. It’s too cold to paint with that nasty stuff now.

Before

View attachment 8353873

After

View attachment 8353789

Edited to add- this mod will work with AICS skins, too.

With the AICS, you’ll have the big square bolt opening for the R700.

You won’t have to modify the trigger opening because that’s already done.

This is because the rear action mounting bolt opening is at the rear of the trigger opening.
Click to expand...

Finally got a decent enough day in Northern Virginia to spray some DuraCoat WWII OD green on the vandalized skins for my AT.

IMG_6704.jpeg


IMG_6702.jpeg


Very bright sun for a change.
 
  • Like
  • Love
Reactions: PrecisionRifleGuy, Silvan, yej0001 and 5 others
#18,293
Smokerroller said:
Hey man it looks like you have 5.56, 308, and a magnum bolt heads here. Are these short action bolts or ASR? I’d like to run mangum (saum or PRC) and 556 in my ATX but I’m not aware of that being possible. Let me know if I’m wrong.
Click to expand...
Yes for the short actions. Currently I have 7saum and 300wsm and 223 barrel for my AT. Check with bugholes/spr for the 223 conversion. @MOUNTIC also posts them up every now and then too. Factory bolts are the hardest item to source
 
#18,294
VSP968 said:
Finally got a decent enough day in Northern Virginia to spray some DuraCoat WWII OD green on the vandalized skins for my AT.

View attachment 8391699

View attachment 8391700

Very bright sun for a change.
Click to expand...
Done.

IMG_6718.jpeg


By the end of the month my Wife will be recovered from her knee surgery and I’ll be able to get back out on Quantico’s Range 4.

I’ve been trapped in the house with her for 3 weeks with 3 to go.

It’s actually worse for her- the only time she can leave the second floor is when she’s carried down the stairs be me and a buddy in an EMS chair so I can load her in her car for physical therapy.

Then we repeat the process in reverse…
 
  • Like
Reactions: VargmatII, Eggman, yej0001 and 13 others
#18,298
bigfoot750 said:
Yes for the short actions. Currently I have 7saum and 300wsm and 223 barrel for my AT. Check with bugholes/spr for the 223 conversion. @MOUNTIC also posts them up every now and then too. Factory bolts are the hardest item to source
Click to expand...
Thanks bigfoot. I contacted bugholes and they only do the .223 conversion. Nothing for magnum and no plans for magnum. Where did you get your magnum setup?
 
You must log in or register to reply here.

Similar threads

austino775
The AI Arctic Warfare Picture Thread
Replies
154
Views
13K
Bkultra
Bkultra
JSW2000
Accessories Accuracy international (M27) 6.5 Creedmoor barrel
Replies
5
Views
588
JSW2000
JSW2000
M
Current Surgeon vs AI Action
Replies
142
Views
4K
Milspec Longhorn
M
5
Firearms SOLD Accuracy International AT 6.5 Creedmoor
Replies
6
Views
2K
556mtjones
5
Unique Forest Green Mammoth
Accuracy International (AICS) 1.5 LA build questions
Replies
4
Views
209
Coejro
Coejro
Top Bottom
Back
Home
Forums
Merch
Alerts