Oh, Snap! I hope you were using one of the TREMOR reticles!
I printed some out of TPU on FDM printer, they work but the print quality of TPU is not great, not good enough to make a product out of it IMO, and I'm too lazy to do a full clean up and powder swap of the SLS printer.
That's odd. How was the bolt head damaged? It's kinda weird they told you to just replace it without them even seeing it. It is understandable that they wouldn't warranty any work not done by them, though.
If ya don't find what you seek my dude, let me know, we've got a nice Markforged printer at work I could commandeer for a 'special assignment' (thanks @derek1ee for the idea).
I keep hearing guys mention that the AW mags are hard to find. Is there a shortage or something?
I got to mess around a bit and set the mag catch height on the GrayOps A-dub. Easy enough to do. Definitely looks like a mag extension when you're used to a regular smooth AW barely poking out. Fit and finish is super nice. I was going to spray it to match my dasher barrel but it looks good and it's already a tight fit in the magwell.
There's a neat little ridge in the mag and follower at the cartridge shoulder, and using the patented finger test, looks like it may help minimize nosedives. I almost want to screw on the dasher barrel just to play with it a bit.
There's a neat little ridge in the mag and follower at the cartridge shoulder, and using the patented finger test, looks like it may help minimize nosedives. I almost want to screw on the dasher barrel just to play with it a bit.
Might be the best looking ai posted in 50 pages or so
Europtic has some axsr left hand bolt bodies in stock. FYI.
www.eurooptic.com
www.eurooptic.com
Accuracy International AXSR .338 Lapua Mag LH Bolt Assembly 29357 For Sale | SHIPS FREE - EuroOptic
FREE SHIPPING on Accuracy International AXSR .338 Lapua Mag LH Bolt Assembly 29357
Accuracy International AXSR .300 Win Mag LH Bolt Assembly 29368
FREE SHIPPING on Accuracy International AXSR .300 Win Mag LH Bolt Assembly 29368
Paging the left handed man himself @Nik HEuroptic has some axsr left hand bolt bodies in stock. FYI.
Accuracy International AXSR .338 Lapua Mag LH Bolt Assembly 29357 For Sale | SHIPS FREE - EuroOptic
FREE SHIPPING on Accuracy International AXSR .338 Lapua Mag LH Bolt Assembly 29357
Accuracy International AXSR .300 Win Mag LH Bolt Assembly 29368
FREE SHIPPING on Accuracy International AXSR .300 Win Mag LH Bolt Assembly 29368
I was just about to say this lol my man is about to barter his way into a fully kitted out lh axmc or will be funding his retirement selling off lh bolts n crap lol
Correct.
The only thing that keeps me from buying it tomorrow is knowing that at some point they will release a sage-green version
Its called applying lessons learned or buying insurance. I know I will buy the rifle soon so I bought not only every bolt body but also a spare firing pin shroud assembly
If my AI ever fails when I need it, my assurance is knowing I can use the damn thing as a club and still go out gangster
“I wanna go out of this world the same way I came into it — screaming my head off and covered in someone else’s blood.”
-Stan
It’s a nice looking range but my tinnitus acts up just looking at it sheesh
Hey man it looks like you have 5.56, 308, and a magnum bolt heads here. Are these short action bolts or ASR? I’d like to run mangum (saum or PRC) and 556 in my ATX but I’m not aware of that being possible. Let me know if I’m wrong.
Attachments
It’s your year, booboo: https://www.eurooptic.com/Accuracy-...e-300-Win-Mag-Sage-Green-26-3-4-24-w-Bra.aspx
Finally got a decent enough day in Northern Virginia to spray some DuraCoat WWII OD green on the vandalized skins for my AT.
Very bright sun for a change.
Let us know how the eclipse affects drying time.
Yes for the short actions. Currently I have 7saum and 300wsm and 223 barrel for my AT. Check with bugholes/spr for the 223 conversion. @MOUNTIC also posts them up every now and then too. Factory bolts are the hardest item to source
Done.
By the end of the month my Wife will be recovered from her knee surgery and I’ll be able to get back out on Quantico’s Range 4.
I’ve been trapped in the house with her for 3 weeks with 3 to go.
It’s actually worse for her- the only time she can leave the second floor is when she’s carried down the stairs be me and a buddy in an EMS chair so I can load her in her car for physical therapy.
Then we repeat the process in reverse…
Anyone else suddenly stop getting notifications for threads they watch? Only ever happens with this thread
Thanks bigfoot. I contacted bugholes and they only do the .223 conversion. Nothing for magnum and no plans for magnum. Where did you get your magnum setup?
In the px. They pop up every so often. If you source a 308 bolt I believe guys are having them modified by black canyon customs now.
My scope decided to divorce my AT @Huskydriver
I’m gonna put a red dot and magnifier on it for the time being since it’s only a 308
I’m gonna put a red dot and magnifier on it for the time being since it’s only a 308
So we now need a 223 conversion for the AXSR 
Because why not
Because why not
The 223 aics doesn’t feel as smooth as the aw mag which is to be expected. I’ve had an issue with one mag but other than that it’s been 100%. The barrel I received from bugholes is my most accurate of all my AI barrels shooting the 80.5 Berger’s. Now my AT usually stays in 223.
