Accessories New Viper Barrel Vise - The Python!

[cattleman99]

The great folks at Viper have given me the opportunity to release their new barrel vise! This vise is an improvement on the older model featuring the following -

- Half the thickness for use on carbon fiber barrels.

- Multi-faceted contact area to provide more surface contact on your barrel.

- Counterbored bolt holes to allow tilting for tapered barrels.

- REMOVABLE Grade 8 bolts, so should they strip or round off, you can knock them out and replace them.

- Same footprint as the old vise, so no need to drill more mounting holes if you’re changing vises.

These are certainly a step up from the previous generation. Viper has been gracious enough to give us the first batch, and I’d love to get this in your hands!!

$95 + $5 shipping. Send me a message to order or order from our website -

https://snyderprecision.com/viper-barrel-vise-new-and-improved/

The Python

 

[cattleman99]

To the top!

 

[chance553]

those bolts are a much better idea than the studs on the studs that were on the one i used before.

 

[Cfshooter]

Anyone use these yet?

 

[cattleman99]

Anyone use these yet?

Doubtful, as I just started shipping this week. Only folks who have had them so far are Viper, myself, and the two smiths I've sent them to for demo. These are super fresh to the market, but you'll enjoy them!

 

[Cjt1983]

Christian any of these left?

 

[cattleman99]

Christian any of these left?

Yes!

 

[919K9]

I’ll take one.

 

[Nivium]

I'll take one too

 

[Dave__th3__ss]

Damn and I just ordered from viper a few weeks ago. These weren’t even an option.

 

[jkwings11]

I’ll take one as well!

 

[Cwfrank623]

Anymore?

 

[cattleman99]

These are now on our website, or we can send you an invoice via PM. Either works! Shipping these quickly, so get in while you can!

https://snyderprecision.com/viper-barrel-vise-new-and-improved/

 

[dschr582]

Will this work for removing factory rem 700 barrels? I've got 2 that are due for remage conversion and need a vise that'll actually hold

 

[cattleman99]

Will this work for removing factory rem 700 barrels? I've got 2 that are due for remage conversion and need a vise that'll actually hold

Yes it will. I rarely have one slip (looking at you, Tikka).

I use the cores of toilet paper rolls. Wrap them around the barrel and crunch it down. Slippage isn’t a problem and I don’t get marring.

 

[Songdoghammer]

The great folks at Viper have given me the opportunity to release their new barrel vise! This vise is an improvement on the older model featuring the following -

- Half the thickness for use on carbon fiber barrels.

- Multi-faceted contact area to provide more surface contact on your barrel.

- Counterbored bolt holes to allow tilting for tapered barrels.

- REMOVABLE Grade 8 bolts, so should they strip or round off, you can knock them out and replace them.

- Same footprint as the old vise, so no need to drill more mounting holes if you’re changing vises.

These are certainly a step up from the previous generation. Viper has been gracious enough to give us the first batch, and I’d love to get this in your hands!!

$95 + $5 shipping. Send me a message to order or order from our website -

https://snyderprecision.com/viper-barrel-vise-new-and-improved/

View attachment 8427254View attachment 8427255View attachment 8427256View attachment 8427257

I’ll buy it could you shoot me a text ? 817-495-4015

 

[cattleman99]

Bump!

 

[cattleman99]

Bump

 

[cattleman99]

4 left in inventory currently. I will be getting more soon!

 

[cattleman99]

Bump! We have more on the way, so more have been added to the site. These are selling quick!

 

[cattleman99]

New shipment arriving tomorrow. Get them while the getting is good!

https://snyderprecision.com/viper-barrel-vise-new-and-improved/

 

[XLR308]

New shipment arriving tomorrow. Get them while the getting is good!

https://snyderprecision.com/viper-barrel-vise-new-and-improved/

Curious about the bolt size on these, they look to be in the 3/4-10 range can you confirm.

 

[cattleman99]

Curious about the bolt size on these, they look to be in the 3/4-10 range can you confirm.

Unsure on the exact size as I haven't had them out yet, but I'm sure they're a very common bolt

 

[cattleman99]

Bump

 

[Slick17]

Sending PM

 

[cattleman99]

Bump!

 

[Whytry85]

Have any of these left?

 

[cattleman99]

Have any of these left?

Shoot me a message. I have one or two ready to ship

 

[Schmo]

Pm inbound

 

[longknives]

Any more on the way?

 

[Jackomason]

This would fit on 2x2 tube steel and into a hitch reciever much better.... too cool.

 

[XLR308]

This would fit on 2x2 tube steel and into a hitch reciever much better.... too cool.

Dude your spelling makes you out to be from Iceland or Norway or something but I see your in my backyard so probably just to fucking high to spell check anything.
Yes 2x2 = reciever hitch is to cool

 

[EmanP]

Are these still available? I'm not finding them on the site.