The ATACR is easier for me to get behind. Have the G3 on the AT-X and ATACR on the AXSR.
Posted this over on the ATXC thread but these Green Meanies have relevance here too.
Really cool to shoot these back to back. The AW is an '07 in .308 and the ATXC is a '24 in 6.5cm...at least 17 years of technological advancement between these two examples.
Really cool to shoot these back to back. The AW is an '07 in .308 and the ATXC is a '24 in 6.5cm...at least 17 years of technological advancement between these two examples.
I discovered that the Limbsaver Recoil Pad Grind To Fit Black Small (1″ Thick/LOP) 10541, if installed upside down, fits on my AI AT, and if left unground offers a softer and wider recoil pad than factory.
See pics below.
-Stan
See pics below.
-Stan
Dialing it in with the 6.5 CM barrel before switching to 300 PRC.
That 6gt recoil be hard huh?
Less about recoil with my 308 and more about increasing the surface area of the recoil pad permits a better rifle to shoulder connection which makes everything seem more steady, especially in the prone.
-Stan
See...all you have to do is turn your recoil pad upside-down. That's what the pros (with little deltoids) do man...
Shots fired...
I turned my new recoil pad upside down.See...all you have to do is turn your recoil pad upside-down. That's what the pros (with little deltoids) do man...
Shots fired...
-Stan
I turned my new recoil pad upside down.
-Stan
Well just know Sir, that when the site figures out how to 'un-gay' itself and its picture posting issue...that I have a meme for you...
Anyone shooting 6 Dasher with the new Gray Ops magazines? I'm having a terrible time getting rounds to feed in my AT-X. Have tried the mag catch at a few different heights. Seems like the brass shoulder is ramming into the receiver locking lugs.
Have you tried the updated mags? They changed the follower to address some issues with 6mm rounds
Having trouble posting pictures right now. I think that may be my issue though. The rounds are coming out of the magazine, but not making it very far. What position did you find worked best for you?
That’s ok, you can.
I don’t have any ATACRs left in the safe at this point *shrug*
I have, and unfortunately I still get stovepipes (nose down) with my 6GT in my AT-X.
The only work-around that I've found at this point is to load the rounds forward...even with the back of the feed lips. Feeds great then, but I doubt that would work well if I were running around in a PRS match and slamming my rifle off of stuff (getting rounds to shift in the magazine).
Bit heavy for coyote hunting but definitely do-able.
Last edited:
My mag needs to be pretty tight against the bottom of the action when locked in. No vertical slop like I can get away with on my other mags.
AXMC, 308 barrel cut to 16.5 along with handguard. Edit, pictures still won’t attach.
Would anyone join if there was an AI owners discord channel? Gauging interest.
Oh your not currently on it? That's awkward
I'm going to put this out there, decided to jump the gun as I was talking to @xxflyingturtlexx about it after SH crashed. And, real-time conversation would be nice. Click the link below to get started:
Click Here: Accuracy International Fan Club Discord Server
Discord is similar to the old IRC days (Internet Relay Chat). Think of it as a server dedicated to a specific topic, that has channels and categories. In this case, the server would be about Accuracy International rifles, and we can do all the same things as we do here on SH in this AI channel, but more. It will take the community to grow it.
It requires downloading the "Discord" application (remember AOL Instant Messenger? Sort of like that, but more). The link above gets you started. And if we can get this big enough, it'd be worth asking for blessings & support from Accuracy International.
Click Here: Accuracy International Fan Club Discord Server
Discord is similar to the old IRC days (Internet Relay Chat). Think of it as a server dedicated to a specific topic, that has channels and categories. In this case, the server would be about Accuracy International rifles, and we can do all the same things as we do here on SH in this AI channel, but more. It will take the community to grow it.
It requires downloading the "Discord" application (remember AOL Instant Messenger? Sort of like that, but more). The link above gets you started. And if we can get this big enough, it'd be worth asking for blessings & support from Accuracy International.
Last edited:
I take it y'all don't know about the underground px either?
Yeah that’s where I got my nib AXSR for 3800. You weren’t supposed to tell anyone
I'm confused...i do have a private px group but now I'm not sure if there is ANOTHER more elite one?????
I’m having you removed from the group that doesn’t exist as soon as I get home and log into my underground account that also doesn’t exist.
First rule of the underground is that you don’t talk about the underground.
Can't be anything good for sale then.
He’s got Sparklers, snakes, and R700’s that take AICS mags.
Don’t forget the lowball offers
You’d be surprised what lowball offers can get you
AWM back on thread target
AWM back on thread target
@BurtG AWM implies it’s an AI action…
GAP Templar in an AICS chassis does not an AWM make
Accuracy International Picture Thread
That's like posting a picture of Ru Paul in the hot wives and girlfriends thread..
He's done that as well
5th Annual Coleman’s Creek Team Sniper Comp
Mail call from EO yesterday. I'm just happy its the same shade of green.
Didn't you go by @deersniper before that account got banned?
You have a AT-X. That's a real AI and not just a chassis. Why not share that?
Official Accuracy International AT-X
Anyone have a new black 6.5 Creedmoor Wintac/Bartlein take-off barrel they wanna sell me? Please send a PM.
www.snipershide.com
Official Accuracy International AT-X
I am going to get a 308 barrel in 18” to mate an rc2 762 that has been sitting alone That what I was going to run I've got a 762RC on a custom rifle but was debating going to a full AI
www.snipershide.com
Deersniper sounds like a troll.Didn't you go by @deersniper before that account got banned?
You have a AT-X. That's a real AI and not just a chassis. Why not share that?
Official Accuracy International AT-X
Anyone have a new black 6.5 Creedmoor Wintac/Bartlein take-off barrel they wanna sell me? Please send a PM.Official Accuracy International AT-X
I am going to get a 308 barrel in 18” to mate an rc2 762 that has been sitting alone That what I was going to run I've got a 762RC on a custom rifle but was debating going to a full AI
