gen 3 razor turret adjustment scales

[Ruslow]

curious as to how I can rezero the turret scales on the g3 razor, On my g2 I just loosen the 3 screws lift up and put scale to what ever I want. have tried to lift the scale on the g3 but will not work. Has anyone been able to reset their turret scales[for lack of proper terms. stan

 

[TheOE800]

RTFM…

 

[Ruslow]

i RTFM!! it has nothing about how to get the zeros lined up between the turret and the insert of the turret. the gen 2 have that option.

 

[GenericBadGuy]

The Gen 3 turret system is different than the Gen 2 turret system. It is very easy to zero the turrets. To reset the turret to the zero stop, you loosen the set screw on that turret.

Review the manual, then watch this video:

 

[Ruslow]

Ok now I have the terminology, I want the inner turret zero to line up with the outer turret zero.
the g2 you can do that but how do you do the gen 3?

 

[carbonbased]

 

[Rob01]

Ok now I have the terminology, I want the inner turret zero to line up with the outer turret zero.
the g2 you can do that but how do you do the gen 3?

What are you talking about? You leave the turrets on zero and locked and then loosen the one screw and then zero the rifle with the top dial. That simple. Then tighten one screw when zeroed and done. No need to do anything else.

 

[spife7980]

 

[RandoPracticalShooting]

Ok now I have the terminology, I want the inner turret zero to line up with the outer turret zero.
the g2 you can do that but how do you do the gen 3?

How did you do it on the G2 and why does it matter to begin with? Your optic is zeroed by using the internal adjustments under the cap on the G2 and you leave the external at zero. It’s the same concept on the G3 you just don’t have a quarter sized cap to cover them.