-
Watch Out for Scammers!
Make sure the person you're messaging is trusted and do not use PayPal Friends & Family for your purchase, this is a common tactic for scammers. Keep safe!
Ammo Brass prep!! sizing, annealing, swagging, chamfer, deburr i do it all...
- Thread starter Dave__th3__ss
- Start date
Ammunition for sale
NOW ABLE TO TRIM ALL CALIBERS…. Upgraded to a Henderson trimmer.
Tag for when I soon go down the road of reloading my own ammo now that I've gotten into long range shooting and $2 or so per trigger pull adds up really damn quick! Started saving all my brass now. It just feels so overwhelming knowing nothing about reloading, but I just need to take the leap.
Know anyone near you that reloads? It really is not difficult, it is just a series of steps. If a friend lets you load some using their ( or yours if possible) equipment, it becomes very clear what to do and what not do as they watch you and explain it. Buy them a pizza and you will be set.
still around still prepping brass for the masses. let me know what you got and i will get your brass squared away for you.
Dave is awesome. Brass is perfectly done. He just did about 700 pieces for me.
Do you let us specify temp for brass and can you control depth of brass heating down the brass to a specification?
I know it is harder to anneal shorter cases like dasher brass than it is to anneal 308 brass. So long as I can get lengths, chamfer, and temps to my specs; I would be happy to send you some.
I use a bench source annealer. I have no way of measuring temp of the brass as it’s being annealed and I refuse to put templaq on anyone’s brass.
You send along 2 cases that are sized to your specs and I will match those. I use a Henderson to trim,chamfer and deburr the brass. As I do not run a dasher I ask you send you bushing die along with it and I will obviously send it back.
I prep your brass as it were my own.
I do dasher in bulk for another member on here @sachsmart . He is a prs shooter and if you go through the posts he will vouch for my work. Single digit SD’s on what I prep for him and consistent.
I’ve probably prepped 4000+ rounds of a mix of br & dasher for him since 2021.
Dave does a great job. I get 3-6 SDs on Dasher & BR which are plenty for PRS. I have multiple firings and the annealing keeps it very consistent. You will have to experiment the bushing size to get the neck tension that works for you
Happen to be using a SAC die? I have a 266 bushing right now. Shooting for 3 thou tension, but I have not worked through the new alpha brass pile yet to need to anneal it again.
That’s easy enough. no i use what ever die you provide. especially if its a bushing die. I typically have the annealing done the same day the brass shows up. then send it back the next
Last edited:
