B&T apr308s accuracy issue

[Beladran]

So first off I can’t believe I’m about to say a gun that cost 8k is at best getting me between 8-24” groups at 100yds after figuring out the barrel is 1:8 twist an not 1:10 like the manual says it is I started trying heavier bullets. 175,180,200,225. Even subsonic ammo is about a 50/50 shot of hitting a ipsc steel @100yds. Everything seems tight. No baffle strikes and what bullets have impacted paper are not keyhole.

My loads are consistent with nice SD’s. I am at a loss here. Thinking about paying the pro shop at the range to see if they can zero it. Take myself out of the equation.

 

[ShtrRdy]

You're going to have to call the manufacturer. They'll probably tell you to first try some factory match ammo. Get a box of Federal Gold Metal Match with the 168 gr bullet and a box of Federal Gold Metal Match with the 175 gr bullet and try that.

 

[Supersubes]

View attachment 8772251
So first off I can’t believe I’m about to say a gun that cost 8k is at best getting me between 8-24” groups at 100yds after figuring out the barrel is 1:8 twist an not 1:10 like the manual says it is I started trying heavier bullets. 175,180,200,225. Even subsonic ammo is about a 50/50 shot of hitting a ipsc steel @100yds. Everything seems tight. No baffle strikes and what bullets have impacted paper are not keyhole. View attachment 8772262
My loads are consistent with nice SD’s. I am at a loss here. Thinking about paying the pro shop at the range to see if they can zero it. Take myself out of the equation.

Do you think the guns lack of a zero causes it to shoot 8-24” groups at 100?

 

[ClangClang]

Try some factory ammo, but if you're getting single digit SDs, you probably know how to reload.

Contact B&T. There's clearly something wrong with the gun. It can happen to anyone. Their US customer service used to be lacking, but these days it's generally excellent with a dedicated office.