• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Army M24 Build Thread

Re: Army M24 Build Thread

after 7 years i finally picked up a drop in DBM for my M24 from Marty

M24dropin2.jpg


M24dropin.jpg


Note the KRG bolt knob. These upgrades are intended for use without mofifying the spec M24
 
Re: Army M24 Build Thread

For all you M24 enthusiasts out there that are in the process of building up your M24 Sniper Weapon System, here is a photo of the the D Kit contents. It's a little nicer to see a photo taken from the original TM from Remington rather than the line drawings that are in the later technical manuals. This is laid out exactly as they are drawn in the TM. This kit is the early style as evidenced by the Redfield Big Bore Sight Inserts, the Optics Cleaning Kit, the Day Optic Ring Screws, the Day Optic Windage and Elevation Dials, the Cleaning Rod and the Front and Rear Sight base screws. All of these changed when Remington changed the iron sights to OK Webber, the Day Optic changed to the M3 LR/T, and the Otis M24 Sniper Cleaning Kit replaced the cleaning rod.
Dkit.jpg
IMG_0721jpg.jpg


This is what it all looks like packed up. Its a tight fit.
20210528_194722.jpg
IMG_0718jpg.jpg


Remington was good enough to pack all these small parts and pieces in bags they numbered to correspond to the numbers on the line drawing in the TM.
20210528_194649.jpg
IMG_0722.jpg


For those curious about the Optics Cleaning Kit, here is a photo of what's inside. Mind you, this is the early kit and has been replaced by the LensPen. Otis also makes an Optics Cleaning Kit very similar to this one.
20210528_195510.jpg
IMG_0723.jpg
 
Last edited:
Re: Army M24 Build Thread

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: EODsix</div><div class="ubbcode-body">For all you M24 enthusiasts out there that are in the process of building up your M24 Sniper Weapon System, here is a photo of the the D Kit contents. It's a little nicer to see a photo rather than the line drawings that are in the technical manuals. This is laid out exactly as they are drawn in the TM. This kit is the early style as evidenced by the Redfield Big Bore Sight Inserts, the Optics Cleaning Kit, the Day Optic Ring Screws, the Day Optic Windage and Elevation Dials, the Cleaning Rod and the Front and Rear Sight base screws. All of these changed when Remington changed the iron sights to OK Webber, the Day Optic changed to the M3 LR/T, and the Otis M24 Sniper Cleaning Kit replaced the cleaning rod.
IMG_0721jpg.jpg


This is what it all looks like packed up. Its a tight fit.
IMG_0718jpg.jpg


Remington was good enough to pack all these small parts and pieces in bags they numbered to correspond to the numbers on the line drawing in the TM.
IMG_0722.jpg


For those curious about the Optics Cleaning Kit, here is a photo of what's inside. Mind you, this is the early kit and has been replaced by the LensPen. Otis also makes an Optics Cleaning Kit very similar to this one.
IMG_0723.jpg
</div></div>


Did you get the box along with the parts from Remington? Can you order these parts from them? Looking to add to my parts collection for my M24 builds.
Thanks
 
Re: Army M24 Build Thread

This box did come with the full SWS from Remington as did all the parts. This is the early DKit that was provided in the SWS. Back on page 12, Lockedandloaded posted a pic of the late model DKit. The older Pelican Box and later the Pelican 1100 boxes are no longer in production. The late model boxes are Pelican 1120 boxes.

As for parts, no you can't get these parts from Remington directly unless you can provide proof of ownership of a genuine M24. Most of the items can be had thru various sources, i.e. Brownells, Midway USA but some of the items are peculiar to Remington. That being said, the screws and other metal parts are parkerized and the cleaning rod (a standard M16 cleaning rod) is powder coated just like the barreled action on the M24. These parts in aftermarket will be blued, or in the case of the cleaning rod, parkerized.

I have a Pelican 1100 and an incomplete DKit that I'm preparing to sell off. I need to inventory it before I list it. If you're interested contact me PM.
 
Re: Army M24 Build Thread

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: EODsix</div><div class="ubbcode-body">I have a Pelican 1100 and an incomplete DKit that I'm preparing to sell off. I need to inventory it before I list it. If you're interested contact me PM. </div></div>
PM inbound.
 
Re: Army M24 Build Thread

To update and somewhat correct the previous posts on the EMA and the ARD for the M24 I present the original issue EMA made by Decilog, cage code 2F218, part number 12950986, NSN 1240-01-380-6326.
This rarely seen laser filter is made of aluminum unlike the current and more common plastic version. It is issued with red plastic protective end caps and has threads and lock ring to fit the M3a scope on one end and 50MM threads for the ARD on the other, it also has the white line index mark. The issued ARD for this EMA is the large aluminum version made by Tenebraex, model number M24/EMA-ARD, NSN 6650-01-456-6515. The ARD is dual threaded to fit the M3a and the EMA.

DSC01310.jpg

DSC01308.jpg

DSC01309.jpg

DSC01312.jpg

DSC01311.jpg


DSC01319.jpg

DSC01313.jpg


DSC01316.jpg

DSC01315.jpg

DSC01317.jpg









 
Re: Army M24 Build Thread

This is the EMA and the ARD that is in the M24 Tech Manual. This EMA was added in Change 4 and the ARD was added in Change 7 though the NSN is misprinted. The actual Change 7 page has the correct NSN but the TM that has the changes thru Change 8 posted, both printed and digital, has the misprint.

EMA 1 1.jpg
ARD 1 1.jpg
 
Last edited:
Re: Army M24 Build Thread

Just won on ebay the redfield front sight along with its inserts.
smile.gif
For anyone looking for M24 parts give ebay a try. I have also won the redfield M24 rear sight as well.
 
Re: Army M24 Build Thread

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: M24SWS</div><div class="ubbcode-body">Just won on ebay the redfield front sight along with its inserts.
smile.gif
For anyone looking for M24 parts give ebay a try. I have also won the redfield M24 rear sight as well. </div></div>
I'd be interested in seeing pictures of those parts. I have the Redfield "International Match" front and rear sights that I'm hoping to use on my build.

Win-Model-70-Sniper-Rifle-010-509x600.jpg
 
Re: Army M24 Build Thread

The M24 sights are detailed on page 8 of this thread, both types used, the Redfield and OK Webber to include correct bases.
 
Re: Army M24 Build Thread

fw7fko.jpg



red6actual, thanks for detailing plastic versus aluminum construction. This example shows both made from plastic.
 
Re: Army M24 Build Thread

I was hoping someone would be like o yea thats ez... o well i emailed HS, well see what they say.
 
Re: Army M24 Build Thread

I can answer that and its a big NO, HS told me they can not add anything to a stock, LOP or cheek as they are molded different.
 
Re: Army M24 Build Thread

Nope HS cannot do that. I wanted to put the adj cheek piece on my M24 and they said just what Red6actual said. No.
 
Re: Army M24 Build Thread

As all of the basic issue M24 items have been detailed in this thread, maybe we should continue into more detail on the A2, the MARS rail, pictured here;

http://www.gunbroker.com/Auction/ViewItem.aspx?Item=289971987

is very useful if you want to mount the clip on night sights such as the PVS-22/26/27.

Badger Ordnance high alloy rings are used with this rail however the original ultra rings and scopes have been seen in use as well.
 
Re: Army M24 Build Thread

Anybody know why the scope rings are mounted so the rings bolts face opposite the loading port? And not on the same side as the loading port?
 
Re: Army M24 Build Thread

Still in my infinite quest to either build or buy an M24 built! However...I want that someone says if this is an accurate receiver, plus the bolt face that it's needed in Long action:

http://www.midwayusa.com/product/499032/...ro-trigger-blue

Technical Information:
Includes a trigger and bolt
No trigger guard or floorplate
Non-ISS bolt does not have an internal locking switch
Trigger is the X-Mark Pro
Threads are 1-1/16"-16 to accept most aftermarket Remington 700 barrels.

And Im sorry to be such silly asking this...but. What does...Non-ISS bolt does not have an internal locking switch...means?

Should I need another part to complete the whole receiver?

Also. Im still having trouble finding the correct floor plate for the beefy M24 stock, something that fits well.
 
Re: Army M24 Build Thread

The action you linked on midwayusa is the correct action to use. The internal locking thing was i believe called j lock. J lock was a button type feature that dealt with locking the bolt or something like that. J lock failed miserably it seemed to cause problems from what i have read.
 
Re: Army M24 Build Thread

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: CitizenArrest</div><div class="ubbcode-body">Anybody know why the scope rings are mounted so the rings bolts face opposite the loading port? And not on the same side as the loading port?
</div></div>

The ring bolts could interfere with ejection/loading if placed on the r.h. side.
 
Re: Army M24 Build Thread

OK M24 sports fans, here's something that will take your M24 build over the top. What M24 would be really complete if it didn't have night op capability. Here's a chance to get a Simrad AN/PVS-9 for your weapon. They don't show up often so someone needs to jump on this one.

http://www.ar15.com/forums/t_7_163/10068..._kit__4500.html

Here is a shot of mine with my PVS-9
20210527_182016.jpg

 
Last edited:
Re: Army M24 Build Thread

What a great piece of kit! Wish I had the cash. From the Link above.

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: [email protected]</div><div class="ubbcode-body">
I have for sale a Simrad KN203FAB night vision sight kit, this is the AN/PVS-9 as used by US Military Snipers.

Unit comes as pictured with soft case, hard case, 30MM ring mount (will fit Leupold pre 2000 and Badger rings), setup to mount on 40-56MM objective scopes.

This unit is in excellent condition and functions 100%.

Price is $4500, certified funds only, contact me directly at [email protected]

KGrHqFHJFQE92yimYbBPjZPp7w2Q60_12.jpg


KGrHqJHJBYE9uJLnmy4BPjZPS6W5Q60_12.jpg


KGrHqZowE9d5hkpQBPjHF2Rb4Q60_12.jpg


KGrHqZHJBQE9qmdGl47BPjZPhwkQQ60_12.jpg


KGrHqJHJE0E92MM4Z3OBPjZPNgzw60_12.jpg
</div></div>
 
Re: Army M24 Build Thread

A little bit offtopic here...but what should be the accuraccy of a M24 SWS, using ball ammo? 147 grain?
 
Re: Army M24 Build Thread

From what i understand the M24 was supposed to meet a 1 MOA standard using m118 special ball ammo 173 grain. I am not aware of any accuracy requirements for a 147 grain pill. If you got a M24...shoot some 147 grain and see what it does
smile.gif
 
Re: Army M24 Build Thread

With M118LR the M24 was supposed to shoot at least 1 MOA but the one that I had generally shot much, much better than that. With some lots I was getting better than 1/2 MOA. I hated M118 Special Ball, it was terribly inconsistent and not as accurate as M118LR. While not prohibited it was generally not a good idea to shoot ball ammo through the M24 unless it was in dire circumstances. The accuracy was generally poor compared to M118LR and Special Ball even and unless you had gathered dope on it previously you wouldn't have been sure what your dope was.
 
Re: Army M24 Build Thread

Not a good idea? Nothing will happen if I shoot ball ammo out of a m24? Is just that when I receive mine, I will shoot it for a time...as I dropped my savings to pay it plus bills and I aint gonna buy match ammo for a while. Plus it serves as practice while the good stuff arrives.
 
Re: Army M24 Build Thread

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Yustax</div><div class="ubbcode-body">Not a good idea? Nothing will happen if I shoot ball ammo out of a m24? Is just that when I receive mine, I will shoot it for a time...as I dropped my savings to pay it plus bills and I aint gonna buy match ammo for a while. Plus it serves as practice while the good stuff arrives. </div></div>

If you use 147 grain rounds....its true they may not be as accurate as match ammo but then again whatever your accuracy requirements are is the main thing. Yeah match ammo will make the M24 shine but you gotta use what you got.

Is your m24 a real deal one or clone?

Heath
 
Re: Army M24 Build Thread

Built as a clone, I will pay 2000 for it. Rifle, scope base, sling and bipod. And thanks for the advice. With the ball ammo I'll shoot to 500 yards as maximum to keep practice. I just gotta find stuff that doesnt tear off a match barrel.
 
Re: Army M24 Build Thread

Has anyone here done some serious shooting using the iron sights for the rifle? I understand they were meant for back up use but the biggest thing on my M24 rifle was getting the iron sights 100% complete and operational and using them. I have gone with the principle to use all the equipment as far as sights go and get used to them and see them in action.

If you have used the iron sights on a M24, how far have you shot with them? Have you done prone shooting only or mixed it up a bit?

Also for anyone that has redfield sights in need of repair then call this person.

Phil Scholl (303) 934-8525

Phil got my rear sight and repaired it to 100% operational status and sold me a full set of inserts both the black set and the clear plastic set.

Heath
 
Re: Army M24 Build Thread

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Yustax</div><div class="ubbcode-body">I would love to see videos of your M24's guys, especially shooting it. </div></div>


I'll be home very soon. I will try and make a video of my M24. Be advised mine has the iron sights on it but i think it will serve the purpose. The range i will be at is max of 100 yards.

Heath
 
Re: Army M24 Build Thread

That's cool man, I just wanna see em in action. I guess you have the irons cause the scope hasnt arrived yet.
 
Re: Army M24 Build Thread

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Yustax</div><div class="ubbcode-body">That's cool man, I just wanna see em in action. I guess you have the irons cause the scope hasnt arrived yet. </div></div>

Theres 2 reasons why there is no scope.

1. Money...gotta be careful with the piggy bank.

2. I have always been intrigued by the iron sights and would love to try and master them.

Heath
 
Re: Army M24 Build Thread

Im not very interested in the irons...but it does sounds interesting. As for the money, I will actually will buy a Leupold Vari-X III with USMC mildot, as it's more cheaper and I love the USMC football mildot than the regular one. They go for 700 to 900, and it's a bit cheaper than the Leupold MK4 and they look the same.
 
Re: Army M24 Build Thread

There have been several outstanding programs on Discovery and Military channels showing them in use.
 
Re: Army M24 Build Thread

Does anyone want to begin a discussion regarding the Mil-Dot reticle used with the M24SWS?
 
Re: Army M24 Build Thread

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: lockedandloaded</div><div class="ubbcode-body">Does anyone want to begin a discussion regarding the Mil-Dot reticle used with the M24SWS? </div></div>

Sounds like a good idea. I'm in.
 
Re: Army M24 Build Thread

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: M24SWS</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: lockedandloaded</div><div class="ubbcode-body">Does anyone want to begin a discussion regarding the Mil-Dot reticle used with the M24SWS? </div></div>

Sounds like a good idea. I'm in. </div></div>

Lets begin with why the US Army Mil formulae are considered to be incorrect. Whats your take on that issue?
 
Re: Army M24 Build Thread

My take on it is i don't think it really matters in the grand scheme of things. I mean you point the rifle at the target and whatever mils it takes up, you do the math and so forth and fire. Yes you want to be as accurate as possible but at the same time if your under a time limit or things are going on around you, then you may not have time to get super detailed. Yes it could matter if you get super technical but if you do your part the bullet will kill the target.

Heath
 
You must log in or register to reply here.

Similar threads

m1marty
Accessories Surplus M24 stock/Parts, M14, Garand, More
Replies
11
Views
2K
m1marty
m1marty
USMCSGT0331
A thread with links to suitable donor rifles?
Replies
5
Views
351
RIGREG
R
baker72
Firearms WTS USMC 40X 22LR, USMC M40,M40A1, M70 with Unertl scope, WW2 1903A4, WW2 PU,Barrett MRAD MK22 Socom trials rifle. SEI M14 rare, Adding more items
Replies
4
Views
1K
mcc308
M
Coejro
SOLD WTT/WTS McMillan HTG Smear for M2010 RACS chassis
Replies
6
Views
644
Coejro
Coejro
gasrat
SOLD 6XC, Kelbly, McMillian (KMW), Bartlein, LOW ROUND COUNT
Replies
9
Views
493
gasrat
gasrat
Top Bottom
Back