Re: MK12 MOD-0 LETS SEE EM!
Here is my MK12 MOD 0 Clone
Here is my MK12 MOD 0 Clone
- Thread starter VJJPunisher
- Start date
Re: MK12 MOD-0 LETS SEE EM!
I was sitting in my moms basement surfing around and saw a link to this thread at AR15.com and since none of my friends would come over for a circle jerk I thought I would add my MOD 0 to the mix.
I was sitting in my moms basement surfing around and saw a link to this thread at AR15.com and since none of my friends would come over for a circle jerk I thought I would add my MOD 0 to the mix.
Re: MK12 MOD-0 LETS SEE EM!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: VegasKyle</div><div class="ubbcode-body">
Still have a ways to go but the hard(not necessarily expensive) parts are there. Ops 12th, Leupold 3.5-10x, and maybe an a1 lower are still on the list </div></div>
Now that's a nice 1st post!!!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: VegasKyle</div><div class="ubbcode-body">
Still have a ways to go but the hard(not necessarily expensive) parts are there. Ops 12th, Leupold 3.5-10x, and maybe an a1 lower are still on the list </div></div>
Now that's a nice 1st post!!!
Re: MK12 MOD-0 LETS SEE EM!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: VegasKyle</div><div class="ubbcode-body">
Still have a ways to go but the hard(not necessarily expensive) parts are there. Ops 12th, Leupold 3.5-10x, and maybe an a1 lower are still on the list </div></div>
Nice to see you on both forums Mblades!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: VegasKyle</div><div class="ubbcode-body">
Still have a ways to go but the hard(not necessarily expensive) parts are there. Ops 12th, Leupold 3.5-10x, and maybe an a1 lower are still on the list </div></div>
Nice to see you on both forums Mblades!
Re: MK12 MOD-0 LETS SEE EM!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: redirt78</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dogman</div><div class="ubbcode-body">My Mod 1, upper built by High Caliber Sales, receiver set from the Snipers Hide JD Machine Tech group buy, NF 2.5-10x32 scope, top shelf goodies throughout...also have the Ops Inc 12th Model can in the safe at home; it came after the pic.
</div></div>Dogman, you or whoever took this has some serious skill and a nice camera and a badass gun. A work of art in my opinion. </div></div>
Is that an HDR photomerged product off of Photoshop CS5? You can take several photos adjusting the shutter speed from a negative 2 exposure and work up to a +2 exposure setting and then combine all the photos into a high resolution photo, and the stylize it. A great gun though! I will have to put my gun up here as soon as I get home into an HDR shot to give you an idea.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: redirt78</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dogman</div><div class="ubbcode-body">My Mod 1, upper built by High Caliber Sales, receiver set from the Snipers Hide JD Machine Tech group buy, NF 2.5-10x32 scope, top shelf goodies throughout...also have the Ops Inc 12th Model can in the safe at home; it came after the pic.
Is that an HDR photomerged product off of Photoshop CS5? You can take several photos adjusting the shutter speed from a negative 2 exposure and work up to a +2 exposure setting and then combine all the photos into a high resolution photo, and the stylize it. A great gun though! I will have to put my gun up here as soon as I get home into an HDR shot to give you an idea.
Re: MK12 MOD-0 LETS SEE EM!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: StretchMaK</div><div class="ubbcode-body">I was sitting in my moms basement surfing around and saw a link to this thread at AR15.com and since none of my friends would come over for a circle jerk I thought I would add my MOD 0 to the mix.
</div></div>
hang in there, the circle jerks will surround you on that site soon enough
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: StretchMaK</div><div class="ubbcode-body">I was sitting in my moms basement surfing around and saw a link to this thread at AR15.com and since none of my friends would come over for a circle jerk I thought I would add my MOD 0 to the mix.
hang in there, the circle jerks will surround you on that site soon enough
Re: MK12 MOD-0 LETS SEE EM!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: johngfoster</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: VegasKyle</div><div class="ubbcode-body">
Still have a ways to go but the hard(not necessarily expensive) parts are there. Ops 12th, Leupold 3.5-10x, and maybe an a1 lower are still on the list </div></div>
Now that's a nice 1st post!!! </div></div>
Thanks!
Ive wanted a mod 0 since I got into ARs a little over a year ago. I was planing to piece one together myself and even had some parts when I was lucky enough to find this upper for sale. I'm almost certain it's fom the same batch as Norsman1950's upper. I have to order some stuff from PRI next week and I'll see if they can shed some light on it then.
I hope to get the 12th model ordered in the next few weeks, then start saving for a LR/T.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: johngfoster</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: VegasKyle</div><div class="ubbcode-body">
Still have a ways to go but the hard(not necessarily expensive) parts are there. Ops 12th, Leupold 3.5-10x, and maybe an a1 lower are still on the list </div></div>
Now that's a nice 1st post!!! </div></div>
Thanks!
Ive wanted a mod 0 since I got into ARs a little over a year ago. I was planing to piece one together myself and even had some parts when I was lucky enough to find this upper for sale. I'm almost certain it's fom the same batch as Norsman1950's upper. I have to order some stuff from PRI next week and I'll see if they can shed some light on it then.
I hope to get the 12th model ordered in the next few weeks, then start saving for a LR/T.
Re: MK12 MOD-0 LETS SEE EM!
heres my mk12
waiting on some more parts but its a shooter.
heres my mk12
waiting on some more parts but its a shooter.
Re: MK12 MOD-0 LETS SEE EM!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Paradude</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dogman</div><div class="ubbcode-body"> </div></div>
Is that an HDR photomerged product off of Photoshop CS5?</div></div>
It could be HRD, but to me it looks like he cranked the contrast, boosted the saturation and adjusted the brightness to make it useable.
HDR will allow you to just add a little something extra to making your photo look like it came out of a fantasy land.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Paradude</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dogman</div><div class="ubbcode-body">
Is that an HDR photomerged product off of Photoshop CS5?</div></div>
It could be HRD, but to me it looks like he cranked the contrast, boosted the saturation and adjusted the brightness to make it useable.
HDR will allow you to just add a little something extra to making your photo look like it came out of a fantasy land.
Re: MK12 MOD-0 LETS SEE EM!
Just a lot of contrast and other post processing to make it look gritty. I was home on leave and short on time and didn't set up a nice shot.
Just a lot of contrast and other post processing to make it look gritty. I was home on leave and short on time and didn't set up a nice shot.
Re: MK12 MOD-0 LETS SEE EM!
This has been a great thread, I especially enjoyed seeing the "Mil-return" Mod 0 uppers.
Does PRI actually offer these "Mil-return" uppers for sale from time to time? Just curious to know how these commercially surface.
Thanks
This has been a great thread, I especially enjoyed seeing the "Mil-return" Mod 0 uppers.
Does PRI actually offer these "Mil-return" uppers for sale from time to time? Just curious to know how these commercially surface.
Thanks
Re: MK12 MOD-0 LETS SEE EM!
I gottsta have more cowbell...........er, MK12's
I gottsta have more cowbell...........er, MK12's
Re: MK12 MOD-0 LETS SEE EM!
Here are mine, both assembled by me. Both shoot moa or better with SW ammp 77 gr run and gun. Top is traditional Mod1 lower one is my rendition. I ordered the correct scope for the top gun just waiting. Next is the can. Top has the douglas barrel the lower is a krieger barrel (better) both have Giesselle triggers. They are fun bullet hosers.
Rich
Here are mine, both assembled by me. Both shoot moa or better with SW ammp 77 gr run and gun. Top is traditional Mod1 lower one is my rendition. I ordered the correct scope for the top gun just waiting. Next is the can. Top has the douglas barrel the lower is a krieger barrel (better) both have Giesselle triggers. They are fun bullet hosers.
Rich
Re: MK12 MOD-0 LETS SEE EM!
Here's mine!
HCS MK12 Mod 0 upper built on a Colt upper
Colt lower with factory trigger group for now
A-1ish stock
Leupold MK4 3.5-10x40 LR/T Illum
HCS MK12 Mod 1 upper
L.W.R.C Lower with SOPMOD
Larue mount Leupold MK4 1.5-5x20 MR/T Illum
I welcome your Critique!
Here's mine!
HCS MK12 Mod 0 upper built on a Colt upper
Colt lower with factory trigger group for now
A-1ish stock
Leupold MK4 3.5-10x40 LR/T Illum
HCS MK12 Mod 1 upper
L.W.R.C Lower with SOPMOD
Larue mount Leupold MK4 1.5-5x20 MR/T Illum
I welcome your Critique!
Re: MK12 MOD-0 LETS SEE EM!
no critique, those are how they should be
no critique, those are how they should be
Re: MK12 MOD-0 LETS SEE EM!
I know it's a Mod 1. But glad to finally have a scope back on the rifle again after 2 years. Currently looking for the sights and might be changing to the correct rail this summber.
I know it's a Mod 1. But glad to finally have a scope back on the rifle again after 2 years. Currently looking for the sights and might be changing to the correct rail this summber.
Re: MK12 MOD-0 LETS SEE EM!
Hi, my name is VJJ, and I have a problem
Hi, my name is VJJ, and I have a problem
Re: MK12 MOD-0 LETS SEE EM!
Manfrotto ball head and DLOC-M rail adapter
Manfrotto ball head and DLOC-M rail adapter
Re: MK12 MOD-0 LETS SEE EM!
Just to set the record straight, No MK12’s Mod 0 or Mod 1 were ever issued with a SOPMOD stock.
Any pictures of military rifles with them were unauthorized modifications. The MK12’s were tested with the carbine buffer tube, buffer, and spring and this caused more malfunctions than were allowed. I know I will hear from people who will say theirs work with no problems. I am just telling it the way it was.
Alan
Just to set the record straight, No MK12’s Mod 0 or Mod 1 were ever issued with a SOPMOD stock.
Any pictures of military rifles with them were unauthorized modifications. The MK12’s were tested with the carbine buffer tube, buffer, and spring and this caused more malfunctions than were allowed. I know I will hear from people who will say theirs work with no problems. I am just telling it the way it was.
Alan
Re: MK12 MOD-0 LETS SEE EM!
great post
great post
Re: MK12 MOD-0 LETS SEE EM!
This was a turn key setup a Noveske SPR / switchblock with a Valdada IOR 2.5-10x50 up top
This was a turn key setup a Noveske SPR / switchblock with a Valdada IOR 2.5-10x50 up top
Re: MK12 MOD-0 LETS SEE EM!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AJ Brown</div><div class="ubbcode-body">Just to set the record straight, No MK12’s Mod 0 or Mod 1 were ever issued with a SOPMOD stock.
Any pictures of military rifles with them were unauthorized modifications. The MK12’s were tested with the carbine buffer tube, buffer, and spring and this caused more malfunctions than were allowed. I know I will hear from people who will say theirs work with no problems. I am just telling it the way it was.
Alan
</div></div>
Any thoughts on the suitability of the Vltor A5 on the MK12 Alan? I heard it was designed for the Marines to enable use of adjustable stocks on full length rifles, that leads me to think that it would probably work well on the MK12.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AJ Brown</div><div class="ubbcode-body">Just to set the record straight, No MK12’s Mod 0 or Mod 1 were ever issued with a SOPMOD stock.
Any pictures of military rifles with them were unauthorized modifications. The MK12’s were tested with the carbine buffer tube, buffer, and spring and this caused more malfunctions than were allowed. I know I will hear from people who will say theirs work with no problems. I am just telling it the way it was.
Alan
</div></div>
Any thoughts on the suitability of the Vltor A5 on the MK12 Alan? I heard it was designed for the Marines to enable use of adjustable stocks on full length rifles, that leads me to think that it would probably work well on the MK12.
Re: MK12 MOD-0 LETS SEE EM!
Does anyone have any comments on the differences between the BCM mod 0 upper compared to the mod 0 upper PRI is making and selling currently? Is the BCM worth the extra couple hundred to be equipped the same as the PRI? Also, who makes the barrels that each are making? Looking into one of these, and would like to know what my best choice for the buck would be.
Does anyone have any comments on the differences between the BCM mod 0 upper compared to the mod 0 upper PRI is making and selling currently? Is the BCM worth the extra couple hundred to be equipped the same as the PRI? Also, who makes the barrels that each are making? Looking into one of these, and would like to know what my best choice for the buck would be.
Re: MK12 MOD-0 LETS SEE EM!
Well, I have been waiting to post to show my new creation but I have been waiting for parts. I started my MOD 0 build about three months ago and I have the lower completly built but I am still waiting on the barrel from Compass Lake. They have been waiting to get some blanks in from Douglas and should be able to start on it this week. Hopefulle I will have something so show soon
Well, I have been waiting to post to show my new creation but I have been waiting for parts. I started my MOD 0 build about three months ago and I have the lower completly built but I am still waiting on the barrel from Compass Lake. They have been waiting to get some blanks in from Douglas and should be able to start on it this week. Hopefulle I will have something so show soon
Re: MK12 MOD-0 LETS SEE EM!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Gimpy</div><div class="ubbcode-body">Does anyone have any comments on the differences between the BCM mod 0 upper compared to the mod 0 upper PRI is making and selling currently? Is the BCM worth the extra couple hundred to be equipped the same as the PRI? Also, who makes the barrels that each are making? Looking into one of these, and would like to know what my best choice for the buck would be. </div></div>
Yeah, the barrels. I have a LW barrel from PRI for my Mod 0 build (group by on here earlier this year), but they also sell Douglas barrels (don't know if it's one from Gene Barnett). Mine was Cerakoted black. I don't know who makes BCM's barrels.
Also, from what I've read, BCM still has the correct ARMS #38 PEQ-2-3 rail (and is the only way you can still get the correct rail without buying second-hand), whereas the PRI probably uses their clone PEQ rail. I have the PRI clone, and the biggest difference is the lack of markings and the rear mounting screws/plate are reversed left-right from the ARMS.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Gimpy</div><div class="ubbcode-body">Does anyone have any comments on the differences between the BCM mod 0 upper compared to the mod 0 upper PRI is making and selling currently? Is the BCM worth the extra couple hundred to be equipped the same as the PRI? Also, who makes the barrels that each are making? Looking into one of these, and would like to know what my best choice for the buck would be. </div></div>
Yeah, the barrels. I have a LW barrel from PRI for my Mod 0 build (group by on here earlier this year), but they also sell Douglas barrels (don't know if it's one from Gene Barnett). Mine was Cerakoted black. I don't know who makes BCM's barrels.
Also, from what I've read, BCM still has the correct ARMS #38 PEQ-2-3 rail (and is the only way you can still get the correct rail without buying second-hand), whereas the PRI probably uses their clone PEQ rail. I have the PRI clone, and the biggest difference is the lack of markings and the rear mounting screws/plate are reversed left-right from the ARMS.
Re: MK12 MOD-0 LETS SEE EM!
i really dont quite understand all the need for what one thinks is "correct" in the barrel. Hell pick any barrel thats at least 18 inches that you know will shoot good, collars are easy enough to get made
example 1- this is a white oak 1-7 SPR contour barrel
example 2- this was a 20 inch rock river 1-8 heavy service rifle match barrel, had it cut to 18 inch and had a collar made for it, it utilizes the gas block step inside the collar
example 3- this one (one on the left) is a 18 inch armalite heavy 1-8, had a collar made for it too
point is, a mod-0 can be made with just about any barrel that shoots good, the factor to consider is the collar, the barrel has to have some sort of step on it for the collar to but up against, but most barrels already have a step on em with that .750 area for the gasblock, that can be used. On the armalite barrel thats how it was done, we cut a collar that was a straight inside channel and buts up against that gas block step
i really dont quite understand all the need for what one thinks is "correct" in the barrel. Hell pick any barrel thats at least 18 inches that you know will shoot good, collars are easy enough to get made
example 1- this is a white oak 1-7 SPR contour barrel
example 2- this was a 20 inch rock river 1-8 heavy service rifle match barrel, had it cut to 18 inch and had a collar made for it, it utilizes the gas block step inside the collar
example 3- this one (one on the left) is a 18 inch armalite heavy 1-8, had a collar made for it too
point is, a mod-0 can be made with just about any barrel that shoots good, the factor to consider is the collar, the barrel has to have some sort of step on it for the collar to but up against, but most barrels already have a step on em with that .750 area for the gasblock, that can be used. On the armalite barrel thats how it was done, we cut a collar that was a straight inside channel and buts up against that gas block step
Re: MK12 MOD-0 LETS SEE EM!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: VJJPunisher</div><div class="ubbcode-body">
point is, a mod-0 can be made with just about any barrel that shoots good, the factor to consider is the collar, the barrel has to have some sort of step on it for the collar to but up against, but most barrels already have a step on em with that .750 area for the gasblock, that can be used. On the armalite barrel thats how it was done, we cut a collar that was a straight inside channel and buts up against that gas block step </div></div>
VJJPunisher,
On a slight tangent, is there a spec for where that step should be (from the muzzle or the shoulder of the front threads)? I have seen it stated as at least 2.75" from the muzzle but I don't I don't have a 12th Model yet so I don't know how precisely you have to locate that step.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: VJJPunisher</div><div class="ubbcode-body">
point is, a mod-0 can be made with just about any barrel that shoots good, the factor to consider is the collar, the barrel has to have some sort of step on it for the collar to but up against, but most barrels already have a step on em with that .750 area for the gasblock, that can be used. On the armalite barrel thats how it was done, we cut a collar that was a straight inside channel and buts up against that gas block step </div></div>
VJJPunisher,
On a slight tangent, is there a spec for where that step should be (from the muzzle or the shoulder of the front threads)? I have seen it stated as at least 2.75" from the muzzle but I don't I don't have a 12th Model yet so I don't know how precisely you have to locate that step.
Re: MK12 MOD-0 LETS SEE EM!
there is a spec, but the step on the barrel is NOT whats important, whats important is the location of the 20 degree taper on the collar.
the original military requirement for thread contact was only 3 rotations on the can, this seemed weak to me since theres so much more threads on the brake and in the can so i called ron allen at ops inc, they recommend 6-8 rotations of contact, stating "theyre there, why not use them" and any more than 8 and you might run into threads being exposed inside the can which can be a bitch once it starts fouling.
anywho, on the three guns i have we determined a 2.500 inch length puts it right in there at 6-8, 2.5 being from the front side of the threads on the brake to the START of the 20 degree taper
there is a spec, but the step on the barrel is NOT whats important, whats important is the location of the 20 degree taper on the collar.
the original military requirement for thread contact was only 3 rotations on the can, this seemed weak to me since theres so much more threads on the brake and in the can so i called ron allen at ops inc, they recommend 6-8 rotations of contact, stating "theyre there, why not use them" and any more than 8 and you might run into threads being exposed inside the can which can be a bitch once it starts fouling.
anywho, on the three guns i have we determined a 2.500 inch length puts it right in there at 6-8, 2.5 being from the front side of the threads on the brake to the START of the 20 degree taper
Re: MK12 MOD-0 LETS SEE EM!
when whitney is face down in the tub, 2.5" iches puts it right there at balls deep and usin the crack to hold me can of monster.
when whitney is face down in the tub, 2.5" iches puts it right there at balls deep and usin the crack to hold me can of monster.
Re: MK12 MOD-0 LETS SEE EM!
I shouldn't have clicked on this thread! lol
I'm going with a slightly altered version... Ordered a PRI Gen III DELTA forearm, and Delta Rifle length SPR-PEQ Top Rail.
Next week I'm ordering the Mega Billet upper/lower combo.
I should have a complete rifle around... christmas! haha
I shouldn't have clicked on this thread! lol
I'm going with a slightly altered version... Ordered a PRI Gen III DELTA forearm, and Delta Rifle length SPR-PEQ Top Rail.
Next week I'm ordering the Mega Billet upper/lower combo.
I should have a complete rifle around... christmas! haha
Re: MK12 MOD-0 LETS SEE EM!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: slowkota</div><div class="ubbcode-body">I shouldn't have clicked on this thread! lol
I'm going with a slightly altered version... Ordered a PRI Gen III DELTA forearm, and Delta Rifle length SPR-PEQ Top Rail.
Next week I'm ordering the Mega Billet upper/lower combo.
I should have a complete rifle around... christmas! haha </div></div>
I want to see that!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: slowkota</div><div class="ubbcode-body">I shouldn't have clicked on this thread! lol
I'm going with a slightly altered version... Ordered a PRI Gen III DELTA forearm, and Delta Rifle length SPR-PEQ Top Rail.
Next week I'm ordering the Mega Billet upper/lower combo.
I should have a complete rifle around... christmas! haha </div></div>
I want to see that!
Re: MK12 MOD-0 LETS SEE EM!
Yeah, I havent seen a Mod-0'ish build with a Delta forearm yet.
I'm sure there will be others with completed builds before mine... But I'm going to name it right now:
<span style="font-weight: bold"> <span style="color: #FF0000"> Mk12 MOD-0 Delta </span> </span>
Remember... you heard it here first! hehe
Yeah, I havent seen a Mod-0'ish build with a Delta forearm yet.
I'm sure there will be others with completed builds before mine... But I'm going to name it right now:
<span style="font-weight: bold"> <span style="color: #FF0000"> Mk12 MOD-0 Delta </span> </span>
Remember... you heard it here first! hehe
Re: MK12 MOD-0 LETS SEE EM!
Edit
Edit
Re: MK12 MOD-0 LETS SEE EM!
rico suave, la bamba
rico suave, la bamba
Re: MK12 MOD-0 LETS SEE EM!
Just finished this...
Cerekote by ARPredatorhunter
and the upper finished finished through Kevin O'Neill @ High Caliber. AJ Brown did the assembly -aka saving my ass, lol.
SSA-E trigger,
Rock Creek Barrel
Just missing some glass and she'll be GTG.
Sexyness...
Just finished this...
Cerekote by ARPredatorhunter
and the upper finished finished through Kevin O'Neill @ High Caliber. AJ Brown did the assembly -aka saving my ass, lol.
SSA-E trigger,
Rock Creek Barrel
Just missing some glass and she'll be GTG.
Sexyness...
Re: MK12 MOD-0 LETS SEE EM!
Here's my entry into the SPR pool. LWRC M6-SPR, rebarreled with an 18" standard profile non fluted barrel, stock replaced with an old A2 I had laying around (until the Magpul MOE Fixed stock releases,) Sniper Gray cerakote.
Here's my entry into the SPR pool. LWRC M6-SPR, rebarreled with an 18" standard profile non fluted barrel, stock replaced with an old A2 I had laying around (until the Magpul MOE Fixed stock releases,) Sniper Gray cerakote.
Re: MK12 MOD-0 LETS SEE EM!
^^^^ That's not a MK12 of any variant......
^^^^ That's not a MK12 of any variant......
Re: MK12 MOD-0 LETS SEE EM!
Funny, this thread was about MK12-MoOD-0 rifles but I guess that means you can throw any AR into the mix?
Why don't you keep it on topic?
Funny, this thread was about MK12-MoOD-0 rifles but I guess that means you can throw any AR into the mix?
Why don't you keep it on topic?
Re: MK12 MOD-0 LETS SEE EM!
Here I figured fellow firearm owners and SPR enthusiasts would appreciate my SPR configured rifle even if it looked a little different than 6 pages of the same old thing. My fault for thinking we were all on the same team.
Here I figured fellow firearm owners and SPR enthusiasts would appreciate my SPR configured rifle even if it looked a little different than 6 pages of the same old thing. My fault for thinking we were all on the same team.
Re: MK12 MOD-0 LETS SEE EM!
I can call these SPR's.........but their not
and the title is MK12's not generic SPR
I can call these SPR's.........but their not
and the title is MK12's not generic SPR
Re: MK12 MOD-0 LETS SEE EM!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: VJJPunisher</div><div class="ubbcode-body">I can call these SPR's.........but their not</div></div>
Hah, no you can't. Don't be ridiculous, that'd be worse than my variation if you did.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: VJJPunisher</div><div class="ubbcode-body">I can call these SPR's.........but their not</div></div>
Hah, no you can't. Don't be ridiculous, that'd be worse than my variation if you did.
Re: MK12 MOD-0 LETS SEE EM!
VJJ's point is that this is a MK12 ModX thread.
Here is the black rifle picture thread...post pics to your hearts desire:
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=110555#Post110555
VJJ's point is that this is a MK12 ModX thread.
Here is the black rifle picture thread...post pics to your hearts desire:
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=110555#Post110555
Re: MK12 MOD-0 LETS SEE EM!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Snake Plissken</div><div class="ubbcode-body">H My fault for thinking we were all on the same team.</div></div>
There you go, thinking again. If you stay in your own lane the fenders don't get rubbed.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Snake Plissken</div><div class="ubbcode-body">H My fault for thinking we were all on the same team.</div></div>
There you go, thinking again. If you stay in your own lane the fenders don't get rubbed.
Re: MK12 MOD-0 LETS SEE EM!
Take it easy, no need to get hostile.
Take it easy, no need to get hostile.
Re: MK12 MOD-0 LETS SEE EM!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dogman</div><div class="ubbcode-body"> Here is the black rifle picture thread...
</div></div>
Why's it gotta be black? lol
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dogman</div><div class="ubbcode-body"> Here is the black rifle picture thread...
</div></div>
Why's it gotta be black? lol
Re: MK12 MOD-0 LETS SEE EM!
I've always wanted a Mod 0 clone. Built from parts acquired during two separate group buys here earlier this year (one for the PRI rail, PEQ rail, front sight/gas block, rear sight, and Ops Inc. brake & collar, another for the barrel)
The lower is a Nodak Spud A1-style lower, with a real A1 stock, correctly colored takedown pins, mag release, and selector, Ergogrip, and X-Treme shooting AR-15 trigger. I snagged the Eagle TAS-1UM sling from CTD back when they had them, and the bipod is an Atlas (that sadly has to be shared among several guns).
The upper has the following deviations from spec:
<ul style="list-style-type: disc">[*]Upper is not gen-u-wine Colt[*]PRI Gen III handguard is naked carbon instead of painted black[*]PRI barrel made from a Lothar Walther blank, Cerakoted black[*]The rear BUIS is a A.R.M.S. #40L instead of the regular #40[*]Bolt carrier is stainless Young N/M I had laying around, MP bolt[*]PRI PEQ rail instead of A.R.M.S. PEQ-2-3 top rail[/list]
The scope is a Leupold VX-R Patrol 3-9x40 that I also bought through a group buy here. I couldn't see spending $1k on a "spec" Leupold when there are other scopes I like better for that money, and I got a really good deal on the VX-R.
So far IMO the scope is hit and miss. I like that it is compact , has great glass, has a very cool illumination system, is mil/mil, and that I got it for a great price. I don't like that the reticle is way too thick and obscures the center of the target (my biggest beef, really –– can't see a 1" dot at 100yd), and the knobs are kinda mushy (not much better than the BSA 4-14x44 I have on a Savage MkII to be honest). I also don't like the garish "Leupold" on the sides of the ocular, or the golden medallion on the illumination knob.
When finances permit, I'll probably move the scope over to my 6.8SPC AR, as it would be an excellent hunting scope, and replace it with another scope, like the new Weaver Tactical 2-10x36 FFP or the IOR 2.5-10x42 FFP (already have one and I love it).
Right now I'm shooting Berger 70gr VLD's driven by AR-Comp powder, Winchester brass, and Wolf SRM primers. Holds a little over 1/2 moa at 100 and the MV is 2850fps.
I've always wanted a Mod 0 clone. Built from parts acquired during two separate group buys here earlier this year (one for the PRI rail, PEQ rail, front sight/gas block, rear sight, and Ops Inc. brake & collar, another for the barrel)
The lower is a Nodak Spud A1-style lower, with a real A1 stock, correctly colored takedown pins, mag release, and selector, Ergogrip, and X-Treme shooting AR-15 trigger. I snagged the Eagle TAS-1UM sling from CTD back when they had them, and the bipod is an Atlas (that sadly has to be shared among several guns).
The upper has the following deviations from spec:
<ul style="list-style-type: disc">[*]Upper is not gen-u-wine Colt[*]PRI Gen III handguard is naked carbon instead of painted black[*]PRI barrel made from a Lothar Walther blank, Cerakoted black[*]The rear BUIS is a A.R.M.S. #40L instead of the regular #40[*]Bolt carrier is stainless Young N/M I had laying around, MP bolt[*]PRI PEQ rail instead of A.R.M.S. PEQ-2-3 top rail[/list]
The scope is a Leupold VX-R Patrol 3-9x40 that I also bought through a group buy here. I couldn't see spending $1k on a "spec" Leupold when there are other scopes I like better for that money, and I got a really good deal on the VX-R.
So far IMO the scope is hit and miss. I like that it is compact , has great glass, has a very cool illumination system, is mil/mil, and that I got it for a great price. I don't like that the reticle is way too thick and obscures the center of the target (my biggest beef, really –– can't see a 1" dot at 100yd), and the knobs are kinda mushy (not much better than the BSA 4-14x44 I have on a Savage MkII to be honest). I also don't like the garish "Leupold" on the sides of the ocular, or the golden medallion on the illumination knob.
When finances permit, I'll probably move the scope over to my 6.8SPC AR, as it would be an excellent hunting scope, and replace it with another scope, like the new Weaver Tactical 2-10x36 FFP or the IOR 2.5-10x42 FFP (already have one and I love it).
Right now I'm shooting Berger 70gr VLD's driven by AR-Comp powder, Winchester brass, and Wolf SRM primers. Holds a little over 1/2 moa at 100 and the MV is 2850fps.
Similar threads
