I have a 917v and i want to dress it up a bit.I'm jealous of some of the awesome looking rigs i see on here. I put a tacticool stock on it, EGW picatinny base and a Rifle Basix trigger so far. I would like to do a tactical bolt handle but need help and wuold like some suggestions on a decent scope. I'm not interested in BSA or Simmons and don't mind spending a few hundred so if anybody has any ideas please let me know, thanks.
Marlin 917v build
- Thread starter mojack448
- Start date
Re: Marlin 917v build
Here is a link to a recent thread I found very helpful!
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=3330986#Post3330986
The bolt knob is an Anderson from PTG I think, it says in the link.
As far as glass on the rifle I would check the Mueller APV or APT if you want the target turrets. I have an APV and its an awesome scope! I would also look into the Nikon rimfire scopes, they have a BDC I have heard lots of good things about! Hope this helps!
Here is a link to a recent thread I found very helpful!
http://www.snipershide.com/forum/ubbthreads.php?ubb=showflat&Number=3330986#Post3330986
The bolt knob is an Anderson from PTG I think, it says in the link.
As far as glass on the rifle I would check the Mueller APV or APT if you want the target turrets. I have an APV and its an awesome scope! I would also look into the Nikon rimfire scopes, they have a BDC I have heard lots of good things about! Hope this helps!
Re: Marlin 917v build
something on the cheap side for the bolt knob:
LOW BUDGET .22 TRAINER - tactical/o.sized bolt knob
but it is able to get you the exact size, wieght and angle that you want, and can be adjusted if not "just right"
something on the cheap side for the bolt knob:
LOW BUDGET .22 TRAINER - tactical/o.sized bolt knob
but it is able to get you the exact size, wieght and angle that you want, and can be adjusted if not "just right"
Similar threads
