• Frank's Lesson's Contest

    We want to see your skills! Post a video between now and November 1st showing what you've learned from Frank's lessons and 3 people will be selected to win a free shirt. Good luck everyone!

    Create a channel Learn more
  • Having trouble using the site?

    Contact support

Rifle Scopes NEW Hells Canyon Armory Switchview levers!

HellsCanyonArmory

Sergeant
Commercial Supporter
Full Member
Minuteman
Mar 15, 2010
908
8
Idaho
www.hellscanyonarmory.com
We just got these in today and Kevin at MGM did a FANTASTIC job on them... the laser engraving detail on the levers is amazing! We have a LOT of different models in stock, if you don't see what you are looking for in the application chart, let me know and we should hopefully find something that will work. We have limited quantities available, so if you need a particular model and don't see it in the dropdown menu, then they are not in stock. I do have the SVNNXS models on backorder and they should be here in a week or two!

http://www.hellscanyonarmory.com/index.php/hca-switchview-lever-by-mgm.html

IMG_0177.jpg

IMG_0181.jpg


Mike
 
Re: NEW Hells Canyon Armory Switchview levers!

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: KillZone45</div><div class="ubbcode-body">awesome, please make one for the new SWFA 1-6 as that is what I will be putting one on, thanks! </div></div>

This +1
 
Re: NEW Hells Canyon Armory Switchview levers!

Thanks Jake! I know that the levers I have in stock will fit a wide variety of scopes. If yours is not listed, the best way for me to get something to you that will fit is to get me the max diameter of you magnification ring. There is quite a bit of room in these to get them to fit so I'm sure we can find a model to fit most anything! Either PM me the measurement or post in this thread and I'll get an answer to you. I'm leaving in about 6 hours and will be away for the weekend but will be back on here sunday night. Thanks again!

Mike
 
Re: NEW Hells Canyon Armory Switchview levers!

Sorry to of not gotten back on here over the weekend!
Jake, If you want send me a PM. Looks like the IOR CQB model 'should' work for your scope! Though I'm not sure if I want you to have one, I'd hate for you to beat me with my own equipment...
smile.gif
Send me a PM or order and I'll get it out to you ASAP!

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: PatrickChewing</div><div class="ubbcode-body">And chance of getting one for my Premiers?</div></div>

You bet! Do you happen to know the OD of your magnification ring?

Mike
 
Re: NEW Hells Canyon Armory Switchview levers!

They look good

Whenever those SS 1-6's ship I would like to know if you do have a lever that works for it. I will want one.

Any plans for one that will work with the Bushnell HDMR?
 
Re: NEW Hells Canyon Armory Switchview levers!

redirt,
Thank you. At this point without have a scope in hand (Bushnell HDMR) or their dimensions I can't say one way or the other if I have something that will fit unfortunately. I will make a note to get in touch with SS about their 1-6 dimensions! Thanks again.

Mike
 
Re: NEW Hells Canyon Armory Switchview levers!

Jake,
Here are the levers I have IN STOCK and their ID. I'm sending you a PM here shortly as well...
smile.gif


SVLCQT 1.60"
SVMAPT: 1.655"
SVMDMS 1.762"
SMLMKIV 1.490"
SVLVXII 1.290"
SVLVXIII 1.360"
SVNNXS 1.692"
SVSBSD 1.650"
SVTAP 1.540"
SVBXTR 1.615"
SVIOR CQB 1.775"

These switchviews were a limited run and model selections were based off of their most popular sales from MGM. While its something I strive to avoid, some people will ultimately be left out of the mix in this situation. If there is enough interest however in a few scope models that I'm missing, a special order can be made but a wait list will have to be formed. Sounds like those 1-6 Super Snipers will be right up there with interested parties.

Mike
 
Re: NEW Hells Canyon Armory Switchview levers!

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: HellsCanyonArmory</div><div class="ubbcode-body">Killzone, what is the OD diameter of the new SWFA 1-6 magnification ring? Might have something that already works for it...
smile.gif
</div></div>

I think there is more to it than that. The mag ring is notched almost like a gear.

swvsshd14.jpg
 
Re: NEW Hells Canyon Armory Switchview levers!

For all those waiting for a response regarding the new SWFA 1-6X's coming out, my supplier is in line to get one as soon as SWFA has them available and they will be coming out with some appropriately sized levers! Hopefully around that time if there is enough interest, I'd be more than happy to try and organize a group buy for those interested.

On another note, we just got a few more levers in stock today. The NFNXS models will fit the Viper PST's and I have a few in stock! Thanks all.

Mike
 
Re: NEW Hells Canyon Armory Switchview levers!

I will also be re-organizing the scope-fitting application description later tonight or tomorrow as well. For those of you wondering about levers fitting the SWFA scopes, they are available directly from SWFA ONLY (bummer!).

The Leupold MK6's are using the "SVNFNXS" models...

Thank you!

Mike
 
Re: NEW Hells Canyon Armory Switchview levers!

I would try the SBSD first. Some of the other lever models have notches cut out for difference style magnification rings. The SBSD is a plain circle and the .005" clearance shouldn't matter. It's the last one I have of the SBSD models left so I would jump on it if you are interested! Thank you!
smile.gif


Mike
 
Re: NEW Hells Canyon Armory Switchview levers!

Thats too bad these don't fit the SWFA 5-20. Would be a huge advantage to this scope helping adjust power but atleast SWFA makes them for it.
 
Re: NEW Hells Canyon Armory Switchview levers!

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: CASDB</div><div class="ubbcode-body">Is there a way to work with shipping? It's quoting me $11.45 for standard shipping on just a switchlever. </div></div>

Not at this time. I know how frustrating that can be but I've had hell trying to get a USPS option going on my website which has been on schedule with IT for a few weeks. FedEx and UPS automatically charge it as 1 lb even if its less which is why you're seeing the high shipping costs. This is partially why I dropped the price as much as I did to hopefully help combat the price of shipping. Please understand... Thank you!

Mike

 
Re: NEW Hells Canyon Armory Switchview levers!

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Bunsen</div><div class="ubbcode-body">Thanks for the heads up, I believe I got the last one.
grin.gif
</div></div>

Nice! You're going to love it and that grip you bought as well... definitely my favorite grips for AR's!
wink.gif


Mike
 
Re: NEW Hells Canyon Armory Switchview levers!

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: HellsCanyonArmory</div><div class="ubbcode-body">

The Leupold MK6's are using the "SVNFNXS" models...

Thank you!

Mike </div></div>


This is correct. Ordered one last week and already received it. Quality product and excellent service!

Thanks.
 
Re: NEW Hells Canyon Armory Switchview levers!

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: HellsCanyonArmory</div><div class="ubbcode-body">redirt,
Thank you. At this point without have a scope in hand (Bushnell HDMR) or their dimensions I can't say one way or the other if I have something that will fit unfortunately. I will make a note to get in touch with SS about their 1-6 dimensions! Thanks again.

Mike </div></div>

If I am able to get you dimensions, would you be able to make them? I can mic them out or whatever you might need.

-Mike
 
Re: NEW Hells Canyon Armory Switchview levers!

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SVThuh</div><div class="ubbcode-body">

If I am able to get you dimensions, would you be able to make them? I can mic them out or whatever you might need.

-Mike </div></div>

What scope is it for? I can cross reference sizes to see what might work for your scope dimensions... I'm not making these levers myself, but having MGM make them for HCA. Thanks!

Mike