• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Gunsmithing Which Smith to use???

deadly0311

Tacticool Ninja
Commercial Supporter
Full Member
Minuteman
Mar 2, 2009
4,852
487
Birmingham, AL
I have a TRG 22 that has a 20" barrel. Who can turn it around the quickest for the following work?

Rethread M18x1 threads to 5/8x24 without shortening the barrel
Install and time surefire mb762k

Like to keep the cost under crazy amounts and a week or two turnaround. No one local that I trust to do this.
 
If I could get Chad to answer an email with a quote I would.

You never emailed it to us.
Emails are answered at least daily and most times several times per day. Unless you are a Chinese bearing manufacturer or something that gets caught by the spam filter your email gets answered. Not always with what you want to hear but it gets an answer.
 
You never emailed it to us.
Emails are answered at least daily and most times several times per day. Unless you are a Chinese bearing manufacturer or something that gets caught by the spam filter your email gets answered. Not always with what you want to hear but it gets an answer.

Tap the brakes partner. I used the email link on your site that you guys ask to be used for quotes of work. It's been a couple weeks back. I'm not bad mouthing you guys at all, in fact I'd like to use you guys first.
 
I also used the link on the long rifles web site a few weeks ago and got no answer about putting together supplied parts for a 280. May have a problem.
 
Last edited:
Toby,

What email address do I need to email to? I tried the "contact us" link on y'all's homepage this afternoon and still no response.
 
I e-mailed them twice on there site and gotten no response either. This was over a month ago. Maybe something is wrong with there site...
 
Mark at SAC did some work on my TRG and I could not be happier. Give him a call to see what his turn around is.

Clay
 
Or if it has been a couple of days with no reply please just send me a pm here and include your email address

I am diligently trying to ensure that all communication gets an answer. I can't always get to the phone but I do sit down at least once a day to answer my pm's and email.

JWP
 
Does anyone here know of a trusted Gunsmith who can re-attach a bolt handle to the bolt of a Remington 700 SA ? I just want the factory handle attached to a new bolt. I don't want the handle attached with a top center bolt. Would rather it just soldered back on like the factory or tig welded back on.
 
Does anyone here know of a trusted Gunsmith who can re-attach a bolt handle to the bolt of a Remington 700 SA ? I just want the factory handle attached to a new bolt. I don't want the handle attached with a top center bolt. Would rather it just soldered back on like the factory or tig welded back on.
Try Nate at straight shot gunsmithing. http://www.straightshotgunsmithing.com/page1
 
Last edited:
Does anyone here know of a trusted Gunsmith who can re-attach a bolt handle to the bolt of a Remington 700 SA ? I just want the factory handle attached to a new bolt. I don't want the handle attached with a top center bolt. Would rather it just soldered back on like the factory or tig welded back on.

Try Dan Armstrong for TIG weld: Welcome to Accu-TIG I have used him and have been very satisfied with his work. He is a perfectionist but his prices are reasonable and he has a lifetime warranty on his work.
 
Tap the brakes partner. I used the email link on your site that you guys ask to be used for quotes of work. It's been a couple weeks back. I'm not bad mouthing you guys at all, in fact I'd like to use you guys first.


The sites email link has issues. This is why we never responded. We didn't get it. Email address is listed in our signature block. As for the quote its easy. We've got a GB going on right now and we can roll you into this pretty easily. I have certified gauging for the M18 threads. No sweat. Give us a call tomorrow and we can bang out a quote. Should be able to flip this within 48 hours.

C.
 
Does anyone here know of a trusted Gunsmith who can re-attach a bolt handle to the bolt of a Remington 700 SA ? I just want the factory handle attached to a new bolt. I don't want the handle attached with a top center bolt. Would rather it just soldered back on like the factory or tig welded back on.


I do proly 20+ of these per week. No sweat.