• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Longrifles Inc. Range report: 6 Creedmoor!!

JGorski

Gunny Sergeant
Full Member
Minuteman
Oct 25, 2011
2,992
14
62
Central Wis.
Sunday wasnt the best day to go shooting, high cirrus clouds with sun shining thru made for some mirage but eventually got better as the clouds thickened, not to mention 13mph winds what the weather pages were saying was out of the SE. But I made the best out of it, tried to shoot when there was a lull in the wind(few and far between), and of course I just had to shoot at 300yds to see if my vertical went away. The loads were 41.9 & 42.1grs RL17, 43 & 43.5grs 4000MR and 42.2grs H4350, all with CCIBR primers, and 105 Hornady HPBTs seated to an ogive length of 2.223", cept for the 41.9grs of RE17 which was 2.220", I reloaded that at the range.
42.1grs RE17 all had sticky bolts so I wont use that load any more. had to re-sight the rifle in with 43grs 4000MR since I moved the scope a few days before, from where the bullets were hitting at 100 and 300 it looks like the velocity is right up there, will be going to "Range Report & Exterior ballistics" to see if anyone answered my question about velocity from the trajectory figures I gave out. So here are some of the groups I shot. The 3rd target measured .689". The 4th target shows the shot I took at 100yds to make sure I was on paper then the other 4 shots I took at 300yds.
qytkJFE.jpg

AQKOLuh.jpg

DZQwlfG.jpg

OjqHqQ2.jpg
 
Jay
They all look good to me...i like what im seeing rl17.
Anyway which reamer was used on this? Have you tried measure neck on loaded round?i want to know how much clearance on 274 reamer
..i want to use your reAmer for vld
 
This rifle has the 275 neck, 173 Freebore, for VLDs youll want my other reamer, that has a 274 neck, 104 throat. Loaded round measures .272"
 
This rifle has the 275 neck, 173 Freebore, for VLDs youll want my other reamer, that has a 274 neck, 104 throat. Loaded round measures .272"

You said chad has your 274 reamer right? Ill call long rifle tom.i also add my self on his group buy..tnx jay..im hoping for a good turn around time..
 
Yup, Chad has the 274 neck, 104 throat reamer, you should be able to get a hold of him tomorrow.
 
I have got to get over there to shoot with you. Those look good to me.
 
Last edited:
JGorski,
thanks for all the info on the 6creed you got me hooked.Is the reamer you have with chad joining his stable.
 
JGorski,
thanks for all the info on the 6creed you got me hooked.Is the reamer you have with chad joining his stable.

Chad owns both of my reamers, I paid for the reamers then he discounts the build, he keeps the reamers.
 
Im not sure if Im reading these reamers right, where it says throat, you have .060", thats a short throat, but like I said, maybe Im not reading not right.
 
Your bullets can be adjusted for your throat, .060" throat would work with VLDs the best, 105 Hornadys would be seated too deep with that throat.