quarter-minute accuracy, THANKS GUYS

[AZ.noob]

First, thank you fellas. I've not been here in the Hide very long, and only entered into the precision discipline not long ago, but I owe a lot to y'all for sharing your vast experience and knowledge.

Yesterday, I shot my personal-best accuracy; ALL groups under half-minute, and a few under a quarter-minute (tightest was .219moa).

Thanks again guys. Good stuff here

 

[Aimsmall55]

Pics or BS!! Jk ! Congrats

 

[AZ.noob]

Pics or BS!! Jk ! Congrats

Haha
Pics coming shortly

 

[Timo Turl]

We've gone from 5-shot groups to 3-shot and now no shot

 

[AZ.noob]

Here's a few of the best ones. I made elevation & windage corrections on the second target




200 Yards
Savage 10 FCP McMillan, factory built/unmodified (aside from bedding the action, no aftermarket hotrod parts)
308 Winchester
190 grain SMK, 40.8 grs Varget, CCI 200s
Lapua brass, 2x fired, neck turned & annealed. Runout under .003
2646 average FPS (SDs are a little high, 30fps. I'd like to get that down some)
107*F, 1990' elevation ASL, 30% humidity, 8-10mph wind

These were done from a concrete bench, at a stationary target, at a known distance. I've got a lot to learn; I get that. The point to the thread is to thank you fellas for helping me increase my skills, both at the loading bench and behind the buttstock.

 

[[email protected]]

Just shot a .32 MoA at 300 yards this morning!

 

[RRW]

Try 5 rd groups.

 

[3-0-hate]

Thats pretty good shooting.. As others have said, shoot a 5 shot group and you will get more accurate results. From these groups though, it looks like you have some good fundamentals going for you.

I also ran your groups through OnTarget and spit out the accurate group sizes based on the info you have given. Check it out. Its a free program and it will help you catalogue your results and loading data results..

 

[AZ.noob]

I also ran your groups through OnTarget and spit out the accurate group sizes based on the info you have given. Check it out. Its a free program and it will help you catalogue your results and loading data results..

Thanks for the OnTarget tip, and the compliment

 

[rduckwor]

Damn good shootin'! 107 degrees! I know its a "dry" heat, but too rich for my old blood.

 

[JGorski]

Upper left is a .327moa at 300yds, 5 shots, not 3. Shot yesterday. Creed, 105AMPs HPBTs.

 

[woodland-ghost]

on that ontarget software...does the phone version of it measure the groups like the pc version by just taking a pic on you phone? iphone if it matters

 

[Slofr8]

I'm very impressed. I have 3 rd groups that look like that but from 100yds.
Nice shooting.

 

[AZ.noob]

I'm very impressed. I have 3 rd groups that look like that but from 100yds.
Nice shooting.

Thank you, much appreciated
I'll try to duplicate that with 5-shot groups. I may need to summon Obi Wan to pull that off LOL

 

[tolnep]

5 shot groups is always what i use to confirm a load.

3 shot groups for OCW, at at least 200 yards.

below is 5 shot group, 300M (327 yards), rem 700 5r, 308 175 smk, 43 gr varget, 10 thou off lands. .27 MOA.