- Thread starter PCR
- Start date
Keith,
My rifle finally arrived last night. It took FedEx three days to get it across Houston. Anyway, the photo you posted doesn't do it justice; everyone who saw it at the range this morning loved it. I shot factory ammo at 100 yards and got consistent groups >.3 MOA. That's about as good as I can aim, so the rifle is perfect. Once I get loads developed I'll be down to .25 MOA or better.
Thanks for the great work.
My rifle finally arrived last night. It took FedEx three days to get it across Houston. Anyway, the photo you posted doesn't do it justice; everyone who saw it at the range this morning loved it. I shot factory ammo at 100 yards and got consistent groups >.3 MOA. That's about as good as I can aim, so the rifle is perfect. Once I get loads developed I'll be down to .25 MOA or better.
Thanks for the great work.
Finally got mine out to shoot. Take me out of the equation and it's a sub 1/4 MOA rifle. I just loaded some stuff up at different charges to look for where pressure starts and figured I might as well shoot groups with them.
260 Remington (throat extended .060 over saami)
140 amax loaded for a .015" jump(2.850 oal). This is about .391 with the flier, it's like .185 without. I'll take it..
Thanks again PCR!
260 Remington (throat extended .060 over saami)
140 amax loaded for a .015" jump(2.850 oal). This is about .391 with the flier, it's like .185 without. I'll take it..
Thanks again PCR!
Attachments
Actually, what we do is cut an 1/8" through hole, pre drill the through hole ready to tap 8 X 40, countersink 3/16 to the bolt body, countersink 6mm for the screw head then tap the bolt body 8 X 40. To finish, we bore the screw head flush with the inside of the bolt body to be seamless.
Finished today and ready to ship.
Thanks for looking!
Winchester M70
Manners T4A OD green
bedded with pillars w/ devcon 10110 w/ 2" pad
Bartlein 7mm, 5R, M24, 8.4tw, ss barrel
chambered in 280 Rem @ 26"
PCR varminter knob
PCR thread cap
5/8X24 APA little bastard brake
CDI single stack bottom metal
alpha mag.
OD green, armour black cerakote
Defiance Machine Deviant receiver
AICS 1.5 chassis
Bartlein 338, 5R, AMU, 9.3tw, ss barrel
chambered in .338 Lapua magnum @ 28"
5/8X24 badger Thruster brake
armour black cerakote
Thanks for looking!
Winchester M70
Manners T4A OD green
bedded with pillars w/ devcon 10110 w/ 2" pad
Bartlein 7mm, 5R, M24, 8.4tw, ss barrel
chambered in 280 Rem @ 26"
PCR varminter knob
PCR thread cap
5/8X24 APA little bastard brake
CDI single stack bottom metal
alpha mag.
OD green, armour black cerakote
Defiance Machine Deviant receiver
AICS 1.5 chassis
Bartlein 338, 5R, AMU, 9.3tw, ss barrel
chambered in .338 Lapua magnum @ 28"
5/8X24 badger Thruster brake
armour black cerakote
Looks good Kieth!
We build a lot of long range hunting rifles in 7mm and quite a few for the local guys. Here's a .280AI for an Arizona Coues deer hunter.
True M700 LA
Brux #5 fluted 4 groove barrel @ 26"
PT&G .250" recoil lug
PT&G tactical steel bdl bottom metal
McMillan htg, gap camo, 2 flush cups, 2 studs
McMillan Tan and Armour Black Cerakote
Thanks for looking!
True M700 LA
Brux #5 fluted 4 groove barrel @ 26"
PT&G .250" recoil lug
PT&G tactical steel bdl bottom metal
McMillan htg, gap camo, 2 flush cups, 2 studs
McMillan Tan and Armour Black Cerakote
Thanks for looking!
^^^^that's my rifle!!^^^^^^
Thank you so much Brad and Kieth! I am very happy with the way this gun turned out and I can't wait to shoot it. I have nothing but good things to say about the whole build, from beginning to end you guys did an awesome job.
Thank you so much Brad and Kieth! I am very happy with the way this gun turned out and I can't wait to shoot it. I have nothing but good things to say about the whole build, from beginning to end you guys did an awesome job.
Got my barreled action back, awesome job guys! Could not be happier. Can't wait for the rest of my parts to come in!
Specs:
-Stiller Action .223
-Krieger Barrel 1:8 24" throated to run 80gr VLD
-JEC Custom Muzzle Brake
-Cerakote Coyote Brown
Brad,
Looks good, as usual. The owner should most definitely be happy
The check is in the mail for the .308, you guys should have it in a couple days.
Thanks again to you and the rest of the family for all the great work and support.
v/r
Brad
Looks good, as usual. The owner should most definitely be happy
The check is in the mail for the .308, you guys should have it in a couple days.
Thanks again to you and the rest of the family for all the great work and support.
v/r
Brad
Last edited:
That's yours? Sweet! Let us know how it shoots.
I believe they're starting on my 338 build next...
Sorry for the confusion...not mine.
The guys are finishing up a 308 in a Manners folder for me
that one is mine, I just picked it up on Friday and couldn't be more happy with it.. It looks great and shoots even better i cant thank you guys enough for all the work you you did for me we will definitely be doing another build in the future! Thanks again guys
Picked my XLR/TAC338 build up from PCR this morning. Keith went crazy on this build and I'm stoked!
Stiller TAC338 action
Jewell trigger
Bartlein 9.5 twist stainless, chambered in 338LM
APA FB brake
XLR HD tactical chassis
My own bolt knob
All gunsmithing and cerakote work done by Keith. There's no less than 7 different colors in this full digi camo job:
Stiller TAC338 action
Jewell trigger
Bartlein 9.5 twist stainless, chambered in 338LM
APA FB brake
XLR HD tactical chassis
My own bolt knob
All gunsmithing and cerakote work done by Keith. There's no less than 7 different colors in this full digi camo job:
Last edited:
It looks like some great work!
It is. I can't stop looking at it! I'm pulling a 12day stretch at work or I'd have shot it already. I got 20 rounds loaded up and a box of factory ammo to run through it for a quick break in, probably thursday. I just do a shoot one and clean for the first 5 rounds then a 2 and 3 round group with a cleaning in between each group and it should be gtg.
This rifle talks the talk, AND walks the walk.
3 shot group with random handloads checking for pressure- 86.5gr retumbo, 300 OTM, lapua brass, 3.750. Sub 1/4" group:
3 shot group with random handloads checking for pressure- 86.5gr retumbo, 300 OTM, lapua brass, 3.750. Sub 1/4" group:
Another, 4 shot group. 90 grains retumbo: .28" group
Nice rifle NO DOUBT about that fact. Plus PCR is awesome.
Last edited:
Here's a couple hunting rifles going out this weekend.
280 Remington all metals coated in Sniper Grey
True M700
PT&G .250" recoil lug
factory Xmark Trigger
Brux 9 tw #5 ss barrel @ 24"
McMillan htg Grey Speckletone
Bed with pillars Devcon 10110
PT&G steel bottom metal
Thanks for looking and for keeping us busy!
6.5 Creedmoor all metals coated in Armour Black
True M700
Factory bottom metal
Shilen Trigger
PT&G .250" recoil lug
Brux 8tw #5 ss barrel @ 24"
McMillan Monte Carlo stock Devcon 10110 bed with pillars from tang to forend tip. Barrel was free floated with mil tape. (stock came to us with an M40 barrel channel inlet)
Stock coated in Coyote Tan, FDE and Armour Black 3 color PCR camo
280 Remington all metals coated in Sniper Grey
True M700
PT&G .250" recoil lug
factory Xmark Trigger
Brux 9 tw #5 ss barrel @ 24"
McMillan htg Grey Speckletone
Bed with pillars Devcon 10110
PT&G steel bottom metal
Thanks for looking and for keeping us busy!
6.5 Creedmoor all metals coated in Armour Black
True M700
Factory bottom metal
Shilen Trigger
PT&G .250" recoil lug
Brux 8tw #5 ss barrel @ 24"
McMillan Monte Carlo stock Devcon 10110 bed with pillars from tang to forend tip. Barrel was free floated with mil tape. (stock came to us with an M40 barrel channel inlet)
Stock coated in Coyote Tan, FDE and Armour Black 3 color PCR camo
Last edited:
Twins!
These are identical twins that we built for a good friend. Left handed 7mm-08's for his young boys Sean and Dallin to hunt Coues deer here in Arizona.
True M700's
Brux 9tw $5 ss barrels @ 24"
Manners EH2 stocks
Rifles coated in OD Green and Armour Black Cerakote
Factory bottom metal
Timney triggers
PCR shroud mod. and bolt handle 8-40 screw
personalized etching
These are identical twins that we built for a good friend. Left handed 7mm-08's for his young boys Sean and Dallin to hunt Coues deer here in Arizona.
True M700's
Brux 9tw $5 ss barrels @ 24"
Manners EH2 stocks
Rifles coated in OD Green and Armour Black Cerakote
Factory bottom metal
Timney triggers
PCR shroud mod. and bolt handle 8-40 screw
personalized etching
Those are some sweet rifles. As always, Remarkable work
Twins!
These are identical twins that we built for a good friend. Left handed 7mm-08's for his young boys Sean and Dallin to hunt Coues deer here in Arizona.
True M700's
Brux 9tw $5 ss barrels @ 24"
Manners EH2 stocks
Rifles coated in OD Green and Armour Black Cerakote
Factory bottom metal
Timney triggers
PCR shroud mod. and bolt handle 8-40 screw
personalized etching
What do these two Weigh?
What do the 7-08s weigh?
I never weighed them but I'd say around 7# as pictured.
The great guys at PCR are working on two of my rifles right now and I can't wait to get my hands on them! Thanks a ton guys and looking forward to putting some lead down range. I will also be posting some pictures when the time comes with a range report. Expecting good things, and I know I will get some bad to the bone rifles. Just excited and anxious to get my hands on them.
Best Regards,
Oscar
Best Regards,
Oscar
I just wanted to share an email that I just got from a customer.
"Just wanted to give you guys another big thanks on my build you guys did. Really haven't had much time to do much load development with it until last week and man was I ever pleased".
Berger BT longrange target 175's
Power pro 2000 47.7grs
4 shots @ 100 yds
.389 outside to outside minus .308 = .081
"Just wanted to give you guys another big thanks on my build you guys did. Really haven't had much time to do much load development with it until last week and man was I ever pleased".
Berger BT longrange target 175's
Power pro 2000 47.7grs
4 shots @ 100 yds
.389 outside to outside minus .308 = .081
Sounds like business as usual to me!
Here's three shots at 545yds with one of your rifles...
PCR/XLR/TAC338 http://i813.photobucket.com/albums/zz53/bodywerks/IMG_20130816_111453_255_zps1b498f0d.jpg http://i813.photobucket.com/albums/zz53/bodywerks/IMG_20130816_111325_951_zps290ebdd0.jpg
Here's three shots at 545yds with one of your rifles...
PCR/XLR/TAC338 http://i813.photobucket.com/albums/zz53/bodywerks/IMG_20130816_111453_255_zps1b498f0d.jpg http://i813.photobucket.com/albums/zz53/bodywerks/IMG_20130816_111325_951_zps290ebdd0.jpg
Last edited:
This ones getting picked up today.
Defiance Rebel action
Krieger varmint contour barrel @ 27" chambered in .243 Ackley Improved
Hollands brake
McMillan A3 stock
Bedded with pillars with Devcon 10110
OD Green Cerakote with Armour Black high lights
PT&G Stealth detachable magazine system
Thanks for looking!
Defiance Rebel action
Krieger varmint contour barrel @ 27" chambered in .243 Ackley Improved
Hollands brake
McMillan A3 stock
Bedded with pillars with Devcon 10110
OD Green Cerakote with Armour Black high lights
PT&G Stealth detachable magazine system
Thanks for looking!
Got my second pcr build this week. It turned out awesome. Rem 700sa with a ptg one piece bolt straight handle, brux 24" sendero contour in 6.5 creed with a badger mini fte brake (recoil is like my 223), manners t2 w/ mini chassis, nightforce base and vortex razor 5-20, cerakote coyote tan. Color combo worked out very nice. Took it out for first time this saturday mid-day in az and the mirage was really bad and three different charges all shot in .3" 4shot groups. Will post range photos this week now that i have seating depth set and some fireformed brass. Excellent work again. Highly recommended.
<a href="http://s1258.photobucket.com/user/bwells1911/media/rifle_zpsd493f378.jpg.html" target="_blank"><img src="http://i1258.photobucket.com/albums/ii525/bwells1911/rifle_zpsd493f378.jpg" border="0" alt=" photo rifle_zpsd493f378.jpg"/></a>
<a href="http://s1258.photobucket.com/user/bwells1911/media/rifle_zpsd493f378.jpg.html" target="_blank"><img src="http://i1258.photobucket.com/albums/ii525/bwells1911/rifle_zpsd493f378.jpg" border="0" alt=" photo rifle_zpsd493f378.jpg"/></a>
Here's a 6.5 Creedmoor hunting rifle for a local gal.
Trued SA M700 receiver and bolt
McMillan Edge BDL, black speckletone
PT&G tactical steel hinged floor plate
Brux 8tw, #5, ss, 6 flute barrel @ 24" plus brake
Badger Thruster brake 5/8X24
Armour Black H series Cerakote
Bedded w/ pillars in Devcon 10110
.250 PT&G surface ground recoil lug
Timney 2.5# trigger
3 ring PCR Phoenix knob
PCR shroud mod.
Thanks for looking!
Trued SA M700 receiver and bolt
McMillan Edge BDL, black speckletone
PT&G tactical steel hinged floor plate
Brux 8tw, #5, ss, 6 flute barrel @ 24" plus brake
Badger Thruster brake 5/8X24
Armour Black H series Cerakote
Bedded w/ pillars in Devcon 10110
.250 PT&G surface ground recoil lug
Timney 2.5# trigger
3 ring PCR Phoenix knob
PCR shroud mod.
Thanks for looking!
Last edited:
Just wanted to give PCR a shout out for an amazing rifle. Last October I talked with Keith at PCR about a 6.5 creed project I wanted them to build. I have never worked with PCR before but based on some review I decide to bring my next build to PCR all the way from So Cal. Keith was great on the phone and always got back to me very quickly and kept me in the loop with everything. I even got some picture of things along the way to see how the project was coming along, service was truly above and beyond! Okay well here are a couple pictures of the rifle and I will give the specs below.
Specs are as follows:
Defiance Deviant action
Bartlien barrel m24 contour fluted by bartlien chambered in a 6.5 creedmoor
APA little bastard muzzle brake
Manners T4A stock in midnight camo
Badger bottom metal
Timney trigger
American Rifle Company rings (very cool by the way!)
Bushnell elite xrs 4.5-30 FFP H59 reticle
*Also I should post a better picture but the machine work on the rifle is simply amazing. You can not see where the barrel and brake meet, and the timing of the flutes and brake to the receiver is flawless...
How does it shoot you ask?
5 shoots at 100 yards!
Three shoots at 200 yards!
Here is another group, 5 shoots at 200 yards, I pulled the second and fifth shoot, into the same hole but I pulled them right just a hair at 200 yards.
Once again, a huge thank you to Keith at PCR! Love the rifle, these guys do amazing work! Keith was just great about staying in touch and keeping me informed all the way through the build. I would highly recommend them for a build. I know that my next build will be going to PCR.
Oscar
Specs are as follows:
Defiance Deviant action
Bartlien barrel m24 contour fluted by bartlien chambered in a 6.5 creedmoor
APA little bastard muzzle brake
Manners T4A stock in midnight camo
Badger bottom metal
Timney trigger
American Rifle Company rings (very cool by the way!)
Bushnell elite xrs 4.5-30 FFP H59 reticle
*Also I should post a better picture but the machine work on the rifle is simply amazing. You can not see where the barrel and brake meet, and the timing of the flutes and brake to the receiver is flawless...
How does it shoot you ask?
5 shoots at 100 yards!
Three shoots at 200 yards!
Here is another group, 5 shoots at 200 yards, I pulled the second and fifth shoot, into the same hole but I pulled them right just a hair at 200 yards.
Once again, a huge thank you to Keith at PCR! Love the rifle, these guys do amazing work! Keith was just great about staying in touch and keeping me informed all the way through the build. I would highly recommend them for a build. I know that my next build will be going to PCR.
Oscar
Last edited:
Here's a few 308's shipping out Monday.
Kreiger built .308 rifle. Devcon 10110 bed with pillars and Cerakote by PCR in Icon Grey.
PCR built .308 with 25" Schneider 11tw M40
PCR built .308 with 25" Schneider 11tw M40 with 5/8X24 blended thread cap
Kreiger built .308 rifle. Devcon 10110 bed with pillars and Cerakote by PCR in Icon Grey.
PCR built .308 with 25" Schneider 11tw M40
PCR built .308 with 25" Schneider 11tw M40 with 5/8X24 blended thread cap
Phoenix Custom Rifles lead times and services
Is the GAP camo painted by PCR or molded on the A5? You guys are doing amazing work!
Sent from my iPhone using Tapatalk
Is the GAP camo painted by PCR or molded on the A5? You guys are doing amazing work!
Sent from my iPhone using Tapatalk
Phoenix Custom Rifles 300 RUM
I had PCR build me a 300 RUM and to say that they did a great job would be an understatement. I was on a tight budget for this rifle and they offered great advice from the different types of stocks, action, barrels, triggers, bottom metal, bolts, firing pin assemblies, muzzle brakes, ect., to the caliber that I wanted. I have followed their work for a couple years and this thread has been very informative and really helped me learn what I liked and what I didn't like. Below are a few pics of how well this rifle shoots and a link to a video just in case you don't believe the pictures!
https://www.youtube.com/watch?v=oX4ko8ikTPw
I had PCR build me a 300 RUM and to say that they did a great job would be an understatement. I was on a tight budget for this rifle and they offered great advice from the different types of stocks, action, barrels, triggers, bottom metal, bolts, firing pin assemblies, muzzle brakes, ect., to the caliber that I wanted. I have followed their work for a couple years and this thread has been very informative and really helped me learn what I liked and what I didn't like. Below are a few pics of how well this rifle shoots and a link to a video just in case you don't believe the pictures!
https://www.youtube.com/watch?v=oX4ko8ikTPw
Attachments
Here's a few 308's shipping out Monday.
Kreiger built .308 rifle. Devcon 10110 bed with pillars and Cerakote by PCR in Icon Grey.
PCR built .308 with 25" Schneider 11tw M40
PCR built .308 with 25" Schneider 11tw M40 with 5/8X24 blended thread cap
Good Lord Brother!!!! THESE ARE BEAUTIFUL!!!! PM inbound for some possible work done.
Similar threads
