I have the following ,lapua brass,h322,imr4320,benchmark,ar comp,Winchester large rifle primers.and 110 vmax.i really have exhausted allot of places trying to figure this out.ill use this at about 400 yards on dogs.you guys rule.thanks again
- Thread starter Spent round
- Start date
I gave the 110 V-Max a try a few years ago. I was looking for a 'short line' load that was more practical for our informal local matches and that could possibly do double duty on some varmints. According to my log book I used 47.8gr. to 49gr. of 8208 XBR. OAL was 2.700. It was a short lived endeavor. I couldn't get satisfactory results. I don't see that I tried any other powder.
I switched to the 125gr. Speer TNT. This has worked much better for me. Log book notes say 47gr. Benchmark, 210M, Lapua 13x, 2.705 OAL, "Shoots well out to 300yds. .55MOA@200."
For some reason I started using 8208 XBR here too. My last worked up load for the 125gr. Speer is 48.2gr. 8208 XBR, BR-2, Lapua, 2.775 OAL.
This isn't much help here I know but that s all I got. I'd think you should be able to maybe get something going with the Benchmark or AR Comp. IIRC I got my starting load data from the Hodgdon web site and worked up from there. I thought for sure I chrono'd some of these loads but I can't find any of that info. It's around here somewhere...
Good luck and be safe.
B
I switched to the 125gr. Speer TNT. This has worked much better for me. Log book notes say 47gr. Benchmark, 210M, Lapua 13x, 2.705 OAL, "Shoots well out to 300yds. .55MOA@200."
For some reason I started using 8208 XBR here too. My last worked up load for the 125gr. Speer is 48.2gr. 8208 XBR, BR-2, Lapua, 2.775 OAL.
This isn't much help here I know but that s all I got. I'd think you should be able to maybe get something going with the Benchmark or AR Comp. IIRC I got my starting load data from the Hodgdon web site and worked up from there. I thought for sure I chrono'd some of these loads but I can't find any of that info. It's around here somewhere...
Good luck and be safe.
B
These loads are from the ''metallic cartridge reloading'' manual .they dont specify a vmax but it is for a 110gr bullet
h322 start charge 43.0 2965 fps max 46.0 3229 fps 50,700,cup
imr 4320 start 47.0 2834 fps max 49.0 3010 fps 47,400,cup
these are the only two powders that are on your list i have info on.
i take NO responsibility for these charges,they are from the manual number for number! (i double checked) use at YOUR own RISK,
and be safe and watch for your pressure signs. if you dont know what to look for dont be afraid to ask!
its better to ask a dumb question here then in the hospital.
h322 start charge 43.0 2965 fps max 46.0 3229 fps 50,700,cup
imr 4320 start 47.0 2834 fps max 49.0 3010 fps 47,400,cup
these are the only two powders that are on your list i have info on.
i take NO responsibility for these charges,they are from the manual number for number! (i double checked) use at YOUR own RISK,
and be safe and watch for your pressure signs. if you dont know what to look for dont be afraid to ask!
its better to ask a dumb question here then in the hospital.
i got a couple of loads, but not with IMR 4320. used IMRs 4064, 3031, 4198. don't know if it'll help ya or not.
22" barrel 4064 only
17" barrel 4064, 3031, 4198
only @ 100Y, the target out further blew off and coouldn't find it. 2 5 rnd groups, 1" spot
22" barrel 4064 only
17" barrel 4064, 3031, 4198
only @ 100Y, the target out further blew off and coouldn't find it. 2 5 rnd groups, 1" spot
Similar threads
