New Accessories and Stickers from KRG

[Massoud]

Gentlemen,
As we hope you all know or will come to know, we aim to make the best, most fully supported products available anywhere. To that end, we'd like to introduce a few more to add to the collection. Some of these are ready to ship and some are a little ways out.

-Metal "MOE" rails: These are the same footprint as the Magpul MOE L2 and L3 (respectively) rails. All the chassis come with one of each plastic rail. They are pretty durable but some people want that little bit extra so we now are making some in aluminum. These should fit other things too like the Magpul AR forends but they're geared toward our chassis and each comes with the screws to mount to our chassis/Spigot Mount. These are not quite ready to ship but should be in a couple/few weeks
Material: 6061 Al
Price: $29 for L2 and $32 for L3
Finish: Hard anodize

-Tripod Mount for Whiskey-3 Chassis: This mount is compatible with the 200PL14 quick detach heads on the Manfrotto and other tripods. You can basically just plug your chassis straight into the tripod head. It has MOE L2 hole spacing so it can go on a couple different places on the forend, or in theory you could mount it to another rifle. It has a built in QD cup in the center just for added usability. Ready to ship
Material: Stainless Steel
Finish: Fine bead blast
Price: $74

-Skid Plate: This is the long awaited skid plate. We had some difficulties with this so this will likely be a limited run item. If there is strong demand we'll make them en masse. This piece slides over the forend on the Whiskey-3 Chassis and protects the forend from getting banged up and also protects your hand from the heat/cold of bare metal. It has access holes so you can still remove the forend, the action, or just bolt stuff on over the top like the Tripod Mount in the pic. Ready to ship, ordering will be turned on at midnight Mountain Time.
Material: Kydex 1/8" thick
Price: $29

-LR Shooter Sticker: This is one of my favorite things I think. It's a cool sticker to show the world what we all do with our spare nickels. No longer do you have to be envious of the lady with the "I love Dachsunds" sticker or the guys with the Calvin pissing on everything stickers. Now we have our own. Ready to ship.
Size: 12" wide by 4" high
Price $8

Thank you,
Justin

Added: The hard items are on the website under the "Accessories" section: http://www.kineticresearchgroup.com/products/accessories.php
The sticker is in the "Merchandise" section: http://www.kineticresearchgroup.com/merch.php

[/URL]

[/URL]

[/URL]

 

[Massoud]

Here's pic of the chassis with several of our accessories, including:

-LOP Thumbscrew (top rear of buttstock)
-QD Loop/HK loop (side of buttstock)
-Tripod Mount (bottom of forend)
-Skid Plate (bottom of forend
-L2 Rail (side of forend)
-Spigot Mount (sticks out front of forend)
-QD sling plate (on side of Spigot Mount)
-Badger IMUNS kit (on top of Spigot Mount)

 

[vagrendlier]

I'll take the sticker, send payment option by pm

 

[Massoud]

Ordering has been turned on for the skid plates. It was supposed to be midnight but it's ready now. Sorry about that anyone who tried to order this AM.
vagrendlier- I send a pm to you so if you didn't get anything let me know

Thanks,
Justin

 

[K_4c]

Payment sent for the skid plate, tri pod mount and QD flush plate.... Throw in a stick if your feeling generous Justin I missed it on my order.

Great company with an outstanding product line.

 

[mkollman74]

My skid plate is on its way....!

 

[OFIS]

Justin, I've been out of the loop, do you have pictures of the grippy cheek piece installed?

 

[popeye089]

Justin,
Any news on the Small Grip Retrofit Kit for us gen 2 folder owners. I have been waiting for a model that works with the folders and the description states fixed models only.
Thanks

 

[Massoud]

OFIS, here's a pic. I sent you a message about that 1911 print, not sure if you got it. We use a linkage system to get lateral adjustment on the cheekpiece because the front mounting hole on the cheekpiece is directly over the front cheek riser post.

One thing on the cheekpiece is that with how long it is it might need clearanced a little for the long actions depending on how high you run it.


Popeye, we can put something together for you. Send us an email to info at krg-ops.com and just mention what you're looking for.

Thanks for the orders guys!

 

[VKC]

Bought a skid pad, tripod mount and flush cup plates. Notices that the aluminum MOE rails are out of stock already.

 

[runngun]

Will the Rem700 skid plate also fit on the badger chassis?

 

[Massoud]

Thanks for your orders guys!
The aluminum rails are not ready to ship yet so we haven't turned on the inventory. It will be a couple weeks yet on those.

The 700 Skid plate will fit the Badger as the Badger chassis uses a Rem 700 forend.
Justin

 

[BadYak]

Justin,

Did I really miss getting a Skid Plate?! Tried to order one today and it shows out of stock. Would really love to add this to my Whiskey 3 that Northwest Action Works built for me. Love the chassis! Thanks

 

[Massoud]

Justin,

Did I really miss getting a Skid Plate?! Tried to order one today and it shows out of stock. Would really love to add this to my Whiskey 3 that Northwest Action Works built for me. Love the chassis! Thanks

Longshot, send me a pm with your name/email and we'll get something for you. It looks like we'll be making more of the skid plates as they have been pretty popular.
Justin

 

[scimitar2]

Just a heads up for everyone because I was not aware at the time, but if you use a Manfrotto 322RC2 (or the like) grip head, the tripod adapter will not work. The tripod adapter is set up so the beveled edges are off to the side of the stock. For the grip head, they would need to be to the front and rear of the stock, otherwise the grip will not work. I spoke with Justin about this and he said they are planning on making a mount setup with the beveled edges facing in the right direction, but that they do not yet have one. Great customer service and the one I ordered is on it's way back with no issues, but make sure the mount will work for your needs before you drop the hammer on it.

 

[Massoud]

The metal MOE footprint rails are ready to ship so ordering has been turned on! We have both L2 and L3 configuration. The L2 (shorter) version fits on the bottom of the forend and spigot mount and on either side of the forend and spigot mount. The L3 is longer and it fits on the bottom of the buttstock for mounting a monopod, and fits on the bottom of the forend on the gen 3/4 and some gen 2 chassis.

As mentioned, the tripod adapter mounts sideways rather than front to rear. We're working up a version that can be mounted either way. From what we can find, most of the tripod mounts can take an adapter from either direction but the one with the squeeze grip has to have the beveled edges front and rear.
Thanks,
Justin

 

[Maelstrom]

Any chance of a small rail section with a built in QD?

 

[Mgordon]

Justin,

Here are a few pictures of the latest Tikka T3 with your Whiskey 3 Gen 4 with a few accessories.

Mark

 

[Massoud]

We did consider that but we're not big fans of cutting QD cups into aluminum. Those ball bearings are hard and over time it would really wear on the aluminum, we put one on the barrier stop just because there was unused space. We could maybe cut a steel rail. For a small one it probably wouldn't be too heavy.

Hey Mark, if you want to try to cerakote/bake those grips, we'll send you some new ones if they melt.

Thanks,
Justin

 

[Mgordon]

Justin,

Already got it figured out. We just bake them for longer at lower temperature.

Mark

 

[Massoud]

Oh boy that's one of the best looking TRG's I've seen in a long while, same with the Tikka actually. Those colors look great. How did you get the Victor Co cheek on there? That linkage system was for the wider cheek riser spacing of the gen 3. I had totally spaced that aspect out.
Justin

 

[Gray]

Justin,

Here are a few pictures of the latest Tikka T3 with your Whiskey 3 Gen 4 with a few accessories.

Mark

I'm diggin' the Tikka's!

 

[Massoud]

Mark does some great work with Tikkas (and other actions). My personal best group was with a .260 T3 he built.
Justin

 

[Papagallos]

The Tikka T3 and the Whiskey combination looks sick, Mark!!!!!!

 

[Sonic Crack]

Oh boy that's one of the best looking TRG's I've seen in a long while, same with the Tikka actually. Those colors look great. How did you get the Victor Co cheek on there? That linkage system was for the wider cheek riser spacing of the gen 3. I had totally spaced that aspect out.
Justin

No wonder it took a min to figure out how to mount it. Not the most secure set up for it and not a lot of adjustment with it but got it on there. Just used the parts that came with it.